{"title":"Dust Extractors - Floor and Wall Mounted","description":"","products":[{"product_id":"wall-mount-dust-extractor","title":"Wall-Mount Dust Extractor - 870m³\/h Airflow","description":"Wall-mounted dust collectors have become extremely popular over the past few years, as they save on valuable workshop floor space and make emptying of the collection bag far easier and faster. This powerful dust collector can be connected to a stand-alone machine or can be connected to a 100mm dust system. \u003cbr\u003e\u003cbr\u003eThe 750W induction motor produces a low level of noise at 78 dB, similar to that of a woodturning lathe, whilst generating a highly impressive air flow of 870 m3\/h. This airflow is a measurement of average air flow rather than a peak air flow, that other manufacturers may detail. The 100mm inlet diameter combined with the airflow is more than sufficient to handle the majority of waste produced in the workshop by circular saws, bandsaws, spindle moulders, router tables, planers and woodturning lathes. The main body of the dust collector is made from heavy gauge sheet steel and all of the welds are smoothly finished to prevent sharp edges. The impellor is made from steel to handle large chippings in addition to coarse and fine dust.  \u003cbr\u003e\u003cbr\u003e The 60 litre fleece collection bag has a filtration level of 30 micron. The NVR switch is conveniently positioned on the front face of the motor for quick and easy access if you need to switch the motor off in the event of a hose blockage. The wall mount bracket should be located a minimum of 1.2m from the workshop floor to allow for the collection bag to hang free. \u003cbr\u003e\u003cbr\u003e This model is supplied with a wall mount bracket, fleece collection bag and a dust hose clip. Dust hose is not supplied. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338763362611,"sku":"R8578","price":215.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R8578.jpg?v=1686341491"},{"product_id":"wall-mount-fine-filter-dust-extractor","title":"Wall-Mount Fine Filter Dust Extractor - 750m³\/h Airflow","description":"This premium wall-mounted fine filter dust collector features a pleated canister filter, which traps particles as small as 1 micron, preventing fine dust from re-entering the workshop. You do not even have to open the cannister to unclog it, you simply turn a crank handle, which spins a flap, knocking the dust off the walls of the loaded canister filter. Waste is collected in the 80 litre tear resistant clear collection bag. Wall-mounted dust collectors have become extremely popular over the past few years, as they save on valuable workshop floor space and make emptying of the collection bag far easier and faster. This powerful dust collector can be connected to a stand-alone machine or can be connected to a 100mm dust system. \u003cbr\u003e\u003cbr\u003e The 750W induction motor produces a low level of noise at 87 dB, similar to that of a woodturning lathe, whilst generating an impressive air flow of  750 m3\/h using the pleated cannister filter. This airflow is a measurement of average air flow rather than a peak air flow, that other manufacturers may detail. The 100mm inlet diameter combined with the airflow is more than sufficient to handle the majority of waste produced in the workshop by sanders, circular saws, bandsaws, spindle moulders, router tables, planers and woodturning lathes. The main body of the dust collector is made from heavy gauge sheet steel and all of the welds are smoothly finished to prevent sharp edges. The impellor is made from steel to handle large chippings in addition to coarse and fine dust. \u003cbr\u003e\u003cbr\u003e  The NVR switch is conveniently positioned on the front face of the motor for quick and easy access if you need to switch the motor off in the event of a hose blockage. The wall mount bracket should be located a minimum of 1.6m from the workshop floor to allow for the collection bag to hang free. \u003cbr\u003e\u003cbr\u003e This model is supplied with a wall mount bracket, pleated filter canister with crank handle,  80 litre clear collection bag, dust hose clip and a fleece collection bag (if you wish to use without the pleated canister). ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338764509491,"sku":"R8581","price":395.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R8581.jpg?v=1686341570"},{"product_id":"fine-filter-cartridge-for-wall-mount-dust-extractor","title":"Fine Filter Cartridge for Wall-Mount Dust Extractor","description":"\u003cp\u003eThis fine filter cartridge can be used with the R8578 Premium Wall Mounted Dust Collector to increase the level of filtration from 30 to 1 micron or as a replacement for the fine filter supplied on the R8581 Premium Fine Filter Wall Mounted Dust Collector. This pleated canister filter, traps particles as small as 5 micron, preventing fine dust from re-entering the workshop. You do not even have to open the cannister to unclog it, you simply turning a crank handle, which spins a flap, knocking the dust off the walls of the loaded canister filter. The filter generates an impressive air flow of  750 m3\/h, which is measurement of average air flow rather than a peak air flow, that other manufactures may detail. The filter must be used in conjunction with the R8586 80 litre clear collection bags.©\u003c\/p\u003e","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338766573875,"sku":"R8584","price":220.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R8584.jpg?v=1686341631"},{"product_id":"dust-bag-for-wall-mount-dust-extractor","title":"Dust Bag for Wall-Mount Dust Extractor","description":"\u003cp\u003eThis cloth dust bag is used with the Rutlands® Wall-Mount Dust Extractor. The fleece bag, traps particles as small as 30 micron, preventing the dust from re-entering the workshop. Each bag has a collection capacity of 60 litres. ©\u003c\/p\u003e","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338766836019,"sku":"R8585","price":20.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R8585.jpg?v=1686341636"},{"product_id":"dust-collection-bags-for-wall-mount-fine-filter-dust-extractor-pack-of-3","title":"Dust Bags for Wall-Mount Fine Filter Dust Extractor - Pack of 3","description":"\u003cp\u003eThese clear dust collection bags are made from a heavy duty polypropylene and are tear resistant. The collection capacity is 80L. Supplied as a pack of 3. ©\u003c\/p\u003e","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338767130931,"sku":"R8586","price":15.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R8586.jpg?v=1686341640"},{"product_id":"dust-extractor-mobile-floor-stand","title":"Dust Extractor Mobile Floor Stand","description":"\u003cp\u003eThis mobile floor stand allows the Rutlands® R8578 Wall-Mount Dust Collector to be used in a horizontal position, providing quick and easy mobilisation around the workshop. The stand is manufactured from thick steel pressings, providing strength and rigidity to support the weight of the dust collector above. Each steel component is epoxy powder coated in the same hard-wearing, chip resistant finish as the dust collector for a seamless appearance once installed.\u003cbr\u003e\u003cbr\u003eFour 360° swivel castors provide smooth, unrestricted movement across the workshop floor and feature hard-wearing, non-marring 50mm polyurethane wheels. The stand maintains easy access to the dust collector's grab handle, allowing the unit to be pulled around the workshop in a controlled manner. When portability is not required, the castors can simply be removed, and the stand and dust collector hung onto a wall with suitable wall hooks using the two mounting holes.\u003cbr\u003e\u003cbr\u003eThis floor stand is not recommended for use with the Fine Filter Cartridge due to the added asymmetrical load. ©\u003c\/p\u003e","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":47656716960051,"sku":"R8598","price":35.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/files\/R8598.jpg?v=1725533070"},{"product_id":"fine-filter-dust-extractor-with-wheel-kit-and-wall-mount","title":"Fine Filter Dust Extractor with Wheel Kit and Wall Mount","description":"\u003cp\u003eThis fine filter dust collector with wheel kit and wall mount will collect and filter dust particles down to 0.5 microns, minimising the amount of harmful dust re-entering the workshop. It is purposely designed for use with fine dust producing machines and power tools such as routers, sanders, circular saws, bandsaws, planers and woodturning lathes. Supplied with both a braked mobile wheel kit and a wall mounting bracket, this dust collector can be easily moved around the workshop or mounted in a more permanent position, saving valuable floor space.\u003c\/p\u003e\n\u003cp\u003eWith its three-stage filtration, dust is first filtered through a filter bag, then through a HEPA cartridge filter and finally through a fine gauze filter before the filtered air re-enters the workshop. Dust and shavings are collected in the base of the drum, requiring no costly collection bags and then simply emptied by unclipping the main lid. The 50 litre drum and motor housing are made from strong steel pressings, which are beautifully powder coated to withstand the knocks and bumps associated with a busy workshop. Powered by a quiet running 1100w motor, the extractor generates an air flow rate of 190m3\/h at high pressure, to cope with high volumes of dust without the hose clogging. The 1.7 metre x 102mm diameter hose is made from kink proof PVC, which is ribbed for strength yet is extremely flexible. \u003cbr\u003e\u003cbr\u003eThe optional 38mm hose kits coupled with the 100mm to 35mm adaptor allows you to connect the industry standard 38mm power tool hose to the extractor's 102mm hose outlet. Weighing only 10kg this extractor can comfortably be moved around the workshop, from site to site or be stowed under a workbench as it measures 620mm in height by 400mm in diameter. This is consistently our most popular dust collector, which has proved itself in thousands of workshops, as it is economical to run without the need for collection bags, has excellent suction power and filters fine dust down to 0.5 micron. ©\u003c\/p\u003e","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":48609256079667,"sku":"R8608","price":140.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/files\/R8608.jpg?v=1728032038"},{"product_id":"paper-filter-bags-for-fine-filter-dust-extractor-pack-of-5","title":"Paper Filter Bags for Fine Filter Dust Extractor - Pack of 5","description":"\u003cp\u003eThis pack of 5 filter bags are specifically designed for use with the R8608 Fine Filter Dust Collector. The filter bags simply add an extra layer of dust filtration by covering the HEPA filter cartridge. They are both rip and tear resistant and supplied as a pack of 5. ©\u003c\/p\u003e","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":48659334234419,"sku":"R8610X5","price":10.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R8563X5.jpg?v=1686341329"},{"product_id":"hepa-filter-cartridge-for-fine-filter-dust-extractor","title":"HEPA Filter Cartridge for Fine Filter Dust Extractor","description":"\u003cp\u003eThis HEPA filter cartridge is specifically designed for use with the R8608 Fine Filter Dust Collector. The cartridge is both rip and tear resistant and is simply a push fit to install. ©\u003c\/p\u003e","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":48659334791475,"sku":"R8609","price":20.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R8567.jpg?v=1715159358"},{"product_id":"dust-collector","title":"Dust Extractor - 870m³\/h Airflow","description":"\u003cp\u003eThis powerful yet mobile dust extractor features a high performance 750W induction motor, suitable for continuous operation, generating an air flow rate of 870 m³\/h. As wood chips, coarse and fine dust are pulled into the 57 litre bottom collection bag, the top fine filter bag filters down to 30 microns, reducing the volume of harmful particulate matter re-entering the air.\u003cbr\u003e\u003cbr\u003eThe 100mm inlet is designed for dust hose connection to stand-alone machinery such as bandsaws, table saws or planers, or can also be connected to a 100mm dust collection system. The large capacity 370mm diameter collection bag reduces the number of bag changes, which are performed easily using the quick release locking ring clamps. The collection bag is constructed from a hard wearing, heavy duty polypropylene and is clear to easily identify when it is full. The dust-proof NVR switch is conveniently positioned on the top face of the motor for quick and easy access, and features a large emergency stop button if you need to switch the motor off in the event of a hose blockage.\u003cbr\u003e\u003cbr\u003eHeavy gauge steel construction throughout ensures rigidity, and the large 230mm impellor is precision balanced for quiet, vibration-free operation at only\u003cspan\u003e 78 dB\u003c\/span\u003e. The mobile base features four swivel castors allowing smooth, controlled movement around the workshop and easy storage when not in use. Each steel component is epoxy powder coated for hard-wearing, chip resistant finish. Supplied with a 30 micron filter bag and a 57 litre collection bag. Dust hose not supplied. ©\u003c\/p\u003e","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":49618400051507,"sku":"R8612","price":195.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/files\/R8612.jpg?v=1739974695"},{"product_id":"collection-bag-for-dust-collector-pack-of-3","title":"Collection Bag for Dust Extractor - Pack of 3","description":"\u003cp\u003eDust collection bags for use with the Rutlands® Dust Extractor - 870m³\/h Airflow. These hard wearing, heavy duty polypropylene bags have collection capacity of 57 litres and are tear resistant. Supplied as a pack of 3. ©\u003c\/p\u003e","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":49618421055795,"sku":"R8614X3","price":10.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/files\/R8614X3.jpg?v=1739974626"},{"product_id":"cloth-filter-bag-for-dust-collector","title":"Filter Bag for Dust Extractor","description":"\u003cp\u003eFilter bag for use with the Rutlands® Dust Extractor - 870m³\/h Airflow. These filter bags trap particles as small as 30 microns, reducing the volume of harmful particulate matter re-entering the air. ©\u003c\/p\u003e","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":49618421514547,"sku":"R8613","price":20.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/files\/R8613.jpg?v=1739981164"},{"product_id":"wall-floor-dust-extractor","title":"Wall \u0026 Floor Mount Dust Extractor - 870m³\/h Airflow","description":"\u003cp\u003eThis dust collector contains a wall mounting bracket and mobile floor stand allowing the collector to be hung on a wall or used in a horizontal position, providing quick and easy mobilisation around the workshop or outside. The powerful dust collector can be connected to a stand-alone machine or can be connected to a 100mm dust system. \u003c\/p\u003e\n\u003cp\u003eThe 750W induction motor produces a low level of noise at 78 dB, similar to that of a woodturning lathe, whilst generating a highly impressive air flow of 870 m3\/h. This airflow is a measurement of average air flow rather than a peak air flow, that other manufacturers may detail. The 100mm inlet diameter combined with the airflow is more than sufficient to handle the majority of waste produced in the workshop by circular saws, bandsaws, spindle moulders, router tables, planers and woodturning lathes. The main body of the dust collector is made from heavy gauge sheet steel and all of the welds are smoothly finished to prevent sharp edges. The impellor is made from steel to handle large chippings in addition to coarse and fine dust. \u003cbr\u003e\u003cbr\u003eThe 60 litre fleece collection bag has a filtration level of 30 micron. The NVR switch is conveniently positioned on the front face of the motor for quick and easy access if you need to switch the motor off in the event of a hose blockage. The wall mount bracket should be located a minimum of 1.2m from the workshop floor to allow for the collection bag to hang free.\u003c\/p\u003e\n\u003cp\u003eThe mobile floor stand is manufactured from thick steel pressings, epoxy powder coated in the same hard-wearing, chip resistant finish as the dust collector for a seamless appearance once installed. Four 360° swivel castors provide smooth, unrestricted movement across the workshop floor and feature hard-wearing, non-marring 50mm polyurethane wheels. The stand maintains easy access to the dust collector's grab handle, allowing the unit to be pulled around the workshop in a controlled manner. The stand is not recommended for use with the Fine Filter Cartridge due to the added asymmetrical load. Supplied with a wall mount bracket, mobile floor stand, fleece collection bag and a dust hose clip. Dust hose is not supplied. ©\u003c\/p\u003e","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":50191641313587,"sku":"R8618","price":240.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/files\/R8618_A.jpg?v=1725619273"}],"url":"https:\/\/www.rutlands.com\/collections\/dust-extractors-floor-and-wall-mounted.oembed","provider":"Rutlands Limited","version":"1.0","type":"link"}