{"title":"Retiring Soon","description":"","products":[{"product_id":"solid-carbide-coated-spiral-up-cut-2-flute","title":"Solid Carbide Coated Router Bit - Spiral Up Cut 2 Flute","description":"\u003cb\u003eSolid Carbide Coated Router Bits\u003c\/b\u003e\u003cbr\u003eThe diamond like carbon (DLC) coating is a hard and durable hybridized carbon, SP2 graphite and SP3 diamond surface finish that ensures the bits last 3 times longer than uncoated bits. The coating gives the lowest coefficient of friction which reduces sticking and makes the bits ideal for high speed nesting applications. The coating has minimal thickness of µ 1-3 which guarantees the edges of the bits are perfectly sharp and has a Vickers hardness of HV 2,500 which gives ultimate protection against wear and tear. The bits avoid excessive heat build up which would affect performance. Prior to being coated each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. These STC DLC chrome coated router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpiral Up Cut Two Flute Bits\u003c\/b\u003e\u003cbr\u003eSpiral up cut two flute bits are used to provide fast chip removal whilst routing, with the bit pulling chips up and clear of the cutting area. This eliminates the buildup of dust and chips, ensuring an ultra smooth cut and preventing burning whilst plunge cutting. These bits are ideal for grooving, slotting and mortising where the hole or opening will not be seen, and typically used when the best possible finish is required on the bottom surface of a part.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSuperior Finish and Performance\u003c\/b\u003e\u003cbr\u003eEach spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety. ©","brand":"Rutlands®","offers":[{"title":"D=6mm H=20mm L=50mm S=6mm","offer_id":45338156171571,"sku":"R5400","price":20.0,"currency_code":"GBP","in_stock":true},{"title":"D=8mm H=25mm L=76mm S=8mm","offer_id":45338501316915,"sku":"R5401","price":30.0,"currency_code":"GBP","in_stock":true},{"title":"D=10mm H=32mm L=76mm S=10mm","offer_id":45338501382451,"sku":"R5402","price":40.0,"currency_code":"GBP","in_stock":true},{"title":"D=12mm H=38mm L=89mm S=12mm","offer_id":45338501447987,"sku":"R5403","price":50.0,"currency_code":"GBP","in_stock":true},{"title":"D=12.7mm H=50.8mm L=102mm S=1\/2\"","offer_id":45338501513523,"sku":"R5404","price":60.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/M_R5400.jpg?v=1686323847"},{"product_id":"solid-carbide-coated-spiral-down-cut-2-flute","title":"Solid Carbide Coated Router Bit - Spiral Down Cut 2 Flute","description":"\u003cb\u003eSolid Carbide Coated Router Bits\u003c\/b\u003e\u003cbr\u003eThe diamond like carbon (DLC) coating is a hard and durable hybridized carbon, SP2 graphite and SP3 diamond surface finish that ensures the bits last 3 times longer than uncoated bits. The coating gives the lowest coefficient of friction which reduces sticking and makes the bits ideal for high speed nesting applications. The coating has minimal thickness of µ 1-3 which guarantees the edges of the bits are perfectly sharp and has a Vickers hardness of HV 2,500 which gives ultimate protection against wear and tear. The bits avoid excessive heat build up which would affect performance. Prior to being coated each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. These STC DLC chrome coated router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpiral Down Cut Two Flute Bits\u003c\/b\u003e\u003cbr\u003eSpiral down cut two flute bits are used to push chips down and away from the machine to eliminate splintering and tearout, and provide the finest top surface finish. The down-cut geometry of the bits also works to hold the workpiece in place when used with CNC machines and handheld routers. These bits are ideal for cutting shallow dados, rabbets, and visible slots due to the clean finish provided on the edge of the hole or groove. When used for pattern routing or cutting through material, these bits allow clear vision of the cutting line to be maintained.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSuperior Finish and Performance\u003c\/b\u003e\u003cbr\u003eEach spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety. ©","brand":"Rutlands®","offers":[{"title":"D=6mm H=20mm L=50mm S=6mm","offer_id":45338156204339,"sku":"R5405","price":20.0,"currency_code":"GBP","in_stock":true},{"title":"D=8mm H=25mm L=76mm S=8mm","offer_id":45338502037811,"sku":"R5406","price":30.0,"currency_code":"GBP","in_stock":true},{"title":"D=10mm H=32mm L=76mm S=10mm","offer_id":45338502070579,"sku":"R5407","price":40.0,"currency_code":"GBP","in_stock":true},{"title":"D=12mm H=38mm L=89mm S=12mm","offer_id":45338502103347,"sku":"R5408","price":50.0,"currency_code":"GBP","in_stock":true},{"title":"D=12.7mm H=50.8mm L=102mm S=1\/2\"","offer_id":45338502136115,"sku":"R5409","price":60.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/M_R5405.jpg?v=1686323860"},{"product_id":"solid-carbide-coated-spiral-compression-2-flute","title":"Solid Carbide Coated Router Bit - Spiral Compression 2 Flute","description":"\u003cb\u003eSolid Carbide Coated Router Bits\u003c\/b\u003e\u003cbr\u003eThe diamond like carbon (DLC) coating is a hard and durable hybridized carbon, SP2 graphite and SP3 diamond surface finish that ensures the bits last 3 times longer than uncoated bits. The coating gives the lowest coefficient of friction which reduces sticking and makes the bits ideal for high speed nesting applications. The coating has minimal thickness of µ 1-3 which guarantees the edges of the bits are perfectly sharp and has a Vickers hardness of HV 2,500 which gives ultimate protection against wear and tear. The bits avoid excessive heat build up which would affect performance. Prior to being coated each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. These STC DLC chrome coated router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpiral Compression Two Flute Bits\u003c\/b\u003e\u003cbr\u003eSpiral compression two flute bits feature both up and down shear cutting edges on the same bit. This combination provides down-cutting on the top faces of material and up-cutting on the bottom. This action pulls fibres towards the centre of the board, eliminating tearing \u0026amp; chipping, whilst ensuring an ultra fine finish on both faces. These bits are ideal for double faced veneered, laminated \u0026amp; melamine boards and other abrasive material.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSuperior Finish and Performance\u003c\/b\u003e\u003cbr\u003eEach spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety. ©","brand":"Rutlands®","offers":[{"title":"D=4mm H1=16mm H2=5mm L=50mm S=4mm","offer_id":45338156237107,"sku":"R5410","price":30.0,"currency_code":"GBP","in_stock":true},{"title":"D=5mm H1=20mm H2=6mm L=60mm S=5mm","offer_id":45338502431027,"sku":"R5411","price":30.0,"currency_code":"GBP","in_stock":true},{"title":"D=6mm H1=25mm H2=6mm L=60mm S=6mm","offer_id":45338502463795,"sku":"R5412","price":60.0,"currency_code":"GBP","in_stock":true},{"title":"D=8mm H1=32mm H2=6mm L=80mm S=8mm","offer_id":45338502496563,"sku":"R5413","price":80.0,"currency_code":"GBP","in_stock":true},{"title":"D=10mm H1=32mm H2=6mm L=90mm S=10mm","offer_id":45338502529331,"sku":"R5414","price":110.0,"currency_code":"GBP","in_stock":true},{"title":"D=12mm H1=42mm H2=6mm L=90mm S=12mm","offer_id":45338502562099,"sku":"R5415","price":120.0,"currency_code":"GBP","in_stock":true},{"title":"D=12.7mm H1=35mm H2=6mm L=90mm S=1\/2\"","offer_id":45338502594867,"sku":"R5416","price":130.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/M_R5410.jpg?v=1697708132"},{"product_id":"crown-dead-centre","title":"Crown Dead Centre","description":"These crown dead centres feature a spring loaded centre point to ensure super-fast set up and dismounting of the turning blank. The spring tension can be adjusted to suit the density of the wood, simply by rotating a grubscrew. Surrounding the centre point is a series of 20 razor sharp, precision machined teeth that will not split the wood. They are extremely safe to use, as you can reduce the pressure from the tailstock which prevents the work from revolving in the event of a turning tool dig-in and you can stop the work for inspection without having to switch off the lathe. When used in conjunction with the crown revolving centre which has the same geometry, you can reverse your work, knowing that it will reposition in perfect alignment.\u003cbr\u003e\u003cbr\u003eCNC machined from a hardened tool steel, the dead centre is perfectly balanced to ensure concentricity, resulting in super fine, chatter-free finishes to the turning. The crown drive centre can be used with equal confidence on both soft and hardwoods as well as synthetic materials when pen making. These are premium, heavy duty, dead centres that are much safer, faster and easier to use than conventional centres. ©","brand":"Rutlands®","offers":[{"title":"No 1 MT","offer_id":45338264174899,"sku":"R2557","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"No 2 MT","offer_id":45338352812339,"sku":"R2558","price":20.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/M_R2557.jpg?v=1686323536"},{"product_id":"drill-chuck-13mm","title":"Drill Chuck -13mm","description":"Drill chucks are one of the most popular lathe accessories in a woodturner's armoury and can be used for both turning and drilling applications. When mounted in the headstock, you simply turn a spigot on your blank and then grip the spigot securely in the jaws of the drill chuck. When drilling you can use the drill chuck in either the head or tailstock for holding drill bit shanks from 1mm to 13mm in diameter.\u003cbr\u003e\u003cbr\u003ePrecision CNC machined from tool steel these chucks are accurate to +\/- 0.01mm to ensure excellent concentricity and straight drilling. The jaws of the chuck are hardened to prevent damage and operate via a conventional chuck key. Measuring 180mm in overall length and mounted on a No 1 or No 2 B16 morse taper this is a premium chuck that will become invaluable in the turner's workshop. ©","brand":"Rutlands®","offers":[{"title":"No 1 MT","offer_id":45338264240435,"sku":"R2559","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"No 2 MT","offer_id":45338353271091,"sku":"R2560","price":30.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/M_R2559.jpg?v=1686323548"},{"product_id":"hold-down-clamps-75mm","title":"Hold Down Clamps - 75mm","description":"These bench and track hold down clamps feature a fast jaw clamping mechanism which allows them to be applied one handed within seconds with minimal adjustment being needed to alter their clamping capacity.  Each clamp can be mounted onto a work bench using the supplied bench clamp plate or it can fit into 8.3mm T Tracks to allow a hold down clamp which slides across your work surface. Each clamp rotates a full 360° using a bolt as a pivot creating a fixed or mobile clamping workstation.\u003cbr\u003e\u003cbr\u003eConstructed from steel forgings for strength and durability each clamp features an ergonomically designed handle to allow you to easily transfer the clamping force. There is a quick release lever within the handle meaning the clamp can be disengaged very quickly and smoothly. The arm of each clamp has a no mar swivelling shoe attached which allows irregular work to be clamped without being marked.\u003cbr\u003e\u003cbr\u003eEach clamp has a 75mm throat depth and can clamp a variety of workpieces up to 95mm thick. Supplied with bench mounting plate and fixing screws. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338264666419,"sku":"R3094","price":10.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/M_R3094.jpg?v=1686323587"},{"product_id":"hold-down-clamps-150mm","title":"Hold Down Clamps - 150mm","description":"These bench and track hold down clamps feature a fast jaw clamping mechanism which allows them to be applied one handed within seconds with minimal adjustment being needed to alter their clamping capacity.  Each clamp can be mounted onto a work bench using the supplied bench clamp plate or it can fit into 8.3mm T Tracks to allow a hold down clamp which slides across your work surface. Each clamp rotates a full 360° using a bolt as a pivot creating a fixed or mobile clamping workstation.\u003cbr\u003e\u003cbr\u003eConstructed from steel forgings for strength and durability each clamp features an ergonomically designed handle to allow you to easily transfer the clamping force. There is a quick release lever within the handle meaning the clamp can be disengaged very quickly and smoothly. The arm of each clamp has a no mar swivelling shoe attached which allows irregular work to be clamped without being marked.\u003cbr\u003e\u003cbr\u003eEach clamp has a 150mm throat depth and can clamp a variety of workpieces up to 127mm thick. Supplied with bench mounting plate and fixing screws. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338265125171,"sku":"R3095","price":10.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/M_R3095.jpg?v=1686323603"},{"product_id":"face-clamp-75mm","title":"Face Clamp - 75mm","description":"These face clamps feature a fast jaw clamping mechanism which allows them to be applied one handed within seconds with minimal adjustment being needed to alter the clamping capacity. The clamps are perfect for pocket hole joinery due to their large clamp faces which allow you to clamp over joint lines to ensure perfectly flush seams on your work pieces. With the joint being held flush by the clamp it means when the pocket hole screw is fixed the screw will not follow the grain of the wood, it will remain true and not misalign the joint. The jaws swivel allowing a parallel, even clamping pressure to be achieved, even on irregular shaped work.\u003cbr\u003e\u003cbr\u003eConstructed from steel forgings for strength and durability each clamp features an ergonomically designed handle to allow you to easily transfer the clamping force. There is a quick release lever within the handle meaning the clamp can be disengaged very quickly and smoothly. Each clamp has a 75mm throat depth and clamping capacity of 70mm. ©","brand":"Rutlands®","offers":[{"title":"Single","offer_id":45338265190707,"sku":"R3100","price":8.0,"currency_code":"GBP","in_stock":true},{"title":"Pack of 4","offer_id":45338389774643,"sku":"R3100X4","price":60.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/M_R3100.jpg?v=1686323617"},{"product_id":"solid-carbide-spiral-up-cut-2-flute","title":"Solid Carbide Router Bit - Spiral Up Cut 2 Flute","description":"\u003cb\u003eSolid Carbide Router Bits\u003c\/b\u003e\u003cbr\u003eEach router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. This ultimate micro-grain carbide formulation gives the longest tool life and edge retention ensuring a very clean and accurate cut that leads to the ultimate finish. These STC router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.\n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpiral Up Cut Two Flute Bits\u003c\/b\u003e\u003cbr\u003eSpiral up cut two flute bits are used to provide fast chip removal whilst routing, with the bit pulling chips up and clear of the cutting area. This eliminates the buildup of dust and chips, ensuring an ultra smooth cut and preventing burning whilst plunge cutting. These bits are ideal for grooving, slotting and mortising where the hole or opening will not be seen, and typically used when the best possible finish is required on the bottom surface of a part.\n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSuperior Finish and Performance\u003c\/b\u003e\u003cbr\u003eEach spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety. ©","brand":"Rutlands®","offers":[{"title":"D=3mm H=12mm L=51mm S=1\/4\"","offer_id":45338282033459,"sku":"R5829","price":24.0,"currency_code":"GBP","in_stock":true},{"title":"D=4mm H=16mm L=50mm S=1\/4\"","offer_id":45338604339507,"sku":"R5830","price":28.0,"currency_code":"GBP","in_stock":true},{"title":"D=5mm H=20mm L=50mm S=1\/4\"","offer_id":45338604372275,"sku":"R5831","price":29.0,"currency_code":"GBP","in_stock":true},{"title":"D=6mm H=20mm L=50mm S=1\/4\"","offer_id":45338604405043,"sku":"R5832","price":30.0,"currency_code":"GBP","in_stock":true},{"title":"D=8mm H=25mm L=76mm S=1\/2\"","offer_id":45338604437811,"sku":"R5833","price":70.0,"currency_code":"GBP","in_stock":true},{"title":"D=10mm H=25mm L=76mm S=1\/2\"","offer_id":45338604536115,"sku":"R5834","price":80.0,"currency_code":"GBP","in_stock":true},{"title":"D=12mm H=38mm L=89mm S=1\/2\"","offer_id":45338604634419,"sku":"R5835","price":115.0,"currency_code":"GBP","in_stock":true},{"title":"D=12mm H=50mm L=102mm S=1\/2\"","offer_id":45338604699955,"sku":"R5836","price":135.0,"currency_code":"GBP","in_stock":true},{"title":"D=3mm H=12mm L=50mm S=3mm","offer_id":46096672096563,"sku":"R5435","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"D=4mm H=16mm L=50mm S=4mm","offer_id":46096672129331,"sku":"R5436","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"D=5mm H=20mm L=60mm S=5mm","offer_id":46096672162099,"sku":"R5437","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"D=6mm H=20mm L=60mm S=6mm","offer_id":46096672194867,"sku":"R5438","price":30.0,"currency_code":"GBP","in_stock":true},{"title":"D=8mm H=25mm L=64mm S=8mm","offer_id":46096672227635,"sku":"R5439","price":45.0,"currency_code":"GBP","in_stock":true},{"title":"D=10mm H=25mm L=80mm S=10mm","offer_id":46096672260403,"sku":"R5440","price":60.0,"currency_code":"GBP","in_stock":true},{"title":"D=12mm H=38mm L=90mm S=12mm","offer_id":46096672293171,"sku":"R5441","price":80.0,"currency_code":"GBP","in_stock":true},{"title":"D=12.7mm H=50.8mm L=102mm S=1\/2\"","offer_id":46096672325939,"sku":"R5442","price":100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/M_R5829.jpg?v=1686324501"},{"product_id":"solid-carbide-spiral-chipbreaker-down-cut-2-flute","title":"Solid Carbide Router Bit - Spiral Chipbreaker Down Cut 2 Flute","description":"\u003cb\u003eSolid Carbide Router Bits\u003c\/b\u003e\u003cbr\u003eEach router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. This ultimate micro-grain carbide formulation gives the longest tool life and edge retention ensuring a very clean and accurate cut that leads to the ultimate finish. These STC router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpiral Chipbreaker Down Cut Two Flute Bits\u003c\/b\u003e\u003cbr\u003eSpiral chipbreaker down cut two flute bits are used for their high feed rates and low noise under load, chosen when a fine finish is not required. The down-cut design pushes chips down and away from the machine to eliminate splintering and tearout, and provide a finer top surface finish. The notched chipbreaker profile reduces the size of the chips, providing superior chip clearance and reducing the workload on dust collection systems. The finish given by these bits may be acceptable without further finishing.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSuperior Finish and Performance\u003c\/b\u003e\u003cbr\u003eEach spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety. ©","brand":"Rutlands®","offers":[{"title":"D=8mm H=25mm L=64mm S=1\/4\"","offer_id":45338283147571,"sku":"R5850","price":35.0,"currency_code":"GBP","in_stock":true},{"title":"D=12mm H=50mm L=102mm S=1\/2\"","offer_id":45338607518003,"sku":"R5851","price":70.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/M_R5850.jpg?v=1686324553"},{"product_id":"solid-carbide-spiral-ball-end-up-cut-2-flute","title":"Solid Carbide Router Bit - Spiral Ball End Up Cut 2 Flute","description":"\u003cb\u003eSolid Carbide Router Bits\u003c\/b\u003e\u003cbr\u003eEach router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. This ultimate micro-grain carbide formulation gives the longest tool life and edge retention ensuring a very clean and accurate cut that leads to the ultimate finish. These STC router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpiral Ball End Two Flute Bits\u003c\/b\u003e\u003cbr\u003eSpiral ball end two flute bits leave a rounded bottom and are used for grooving or edge work in CNC machines, however they can be used in handheld routers. The up-cut spiral profiled bits provide fast chip removal whilst routing, with the bit pulling chips up and clear of the cutting area. This eliminates the buildup of dust and chips, ensuring an ultra smooth cut and preventing burning. The bits are designed for use with aluminium, plastic, wood and wood based materials.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSuperior Finish and Performance\u003c\/b\u003e\u003cbr\u003eEach spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety. ©","brand":"Rutlands®","offers":[{"title":"D=3mm H=12mm L=63mm S=1\/4\"","offer_id":45338283737395,"sku":"R5858","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"D=6mm H=25mm L=64mm S=1\/4\"","offer_id":45338608501043,"sku":"R5859","price":20.0,"currency_code":"GBP","in_stock":true},{"title":"D=12mm H=32mm L=89mm S=1\/2\"","offer_id":45338608533811,"sku":"R5860","price":55.0,"currency_code":"GBP","in_stock":true},{"title":"D=3mm H=12mm L=50mm S=3mm","offer_id":46121910894899,"sku":"R5470","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"D=6mm H=25mm L=64mm S=6mm","offer_id":46121910927667,"sku":"R5471","price":15.0,"currency_code":"GBP","in_stock":true},{"title":"D=8mm H=25mm L=64mm S=8mm","offer_id":46121910960435,"sku":"R5472","price":25.0,"currency_code":"GBP","in_stock":true},{"title":"D=10mm H=32mm L=80mm S=10mm","offer_id":46121910993203,"sku":"R5473","price":30.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/M_R5858.jpg?v=1686324602"},{"product_id":"leather-apron","title":"Leather Apron","description":"This apron is made from a premium grade of leather that is exceptionally durable yet has a soft, luxurious feel. Double stitching on the seams and solid brass fasteners ensure that there are no weak points. The neck strap is made from a slightly heavier grade of leather to absorb stress, is easily adjusted for size and held in position with the solid brass nipples. The waist strap features a series of punch holes and a solid brass buckle for easy length adjustment. \u003cbr\u003e\u003cbr\u003eThe apron measures 900mm x 600mm and comfortably wraps around the body preventing saw dust ingress to trouser and shirt pockets. The leather has a smooth surface to prevent saw dust from becoming embedded in the apron, a common issue associated with fabric or suede woodworking aprons. This premium grade leather apron is ideal for woodworkers, woodturners and woodcarvers. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338305003827,"sku":"R1470","price":45.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R1470.jpg?v=1686325735"},{"product_id":"track-saw-blade-ultra-fine-finish-216mm-x-60t-x-30mm","title":"Plunge Saw Blade - Ultra Fine Finish - 216mm x 60T x 30mm","description":"These blades have been specifically developed for use with track saws for precise, ultra-fine finish sawing. They will rip and crosscut hardwood, softwood, particle board, laminates and composite panels. The blade has ATB (alternate top bevel) thin kerf teeth which are angled across the top edge, with every other tooth leaning in the opposite direction. The 10° bevel angle combined with 15° face hook results in a tooth geometry that allows for smooth, fast rip and crosscutting, leaving an ultra fine finish. The thin kerf which is approximately 33% narrower than similar blades means that less material is removed and consequently less strain is put on the motor of the saw. \u003cbr\u003e\u003cbr\u003eMade from German tool steel, these saw blades are consistently rated among the finest performing blades in the woodworking industry. The steel plate is hardened to Rc44, cold rolled and then laser cut with anti-vibration technology, yielding a blade with substantial noise reduction. Each blade is tensioned and balanced to exceed the European standard for flatness, to ensure a run-out accuracy better than 0.025mm. The long-life carbide teeth are precision ground using Vollmer CNC machines which offer the highest level of accuracy, to achieve exact tooth geometry, allowing for clean, finish quality cuts time after time. The carbide tips are sandwich solder brazed with silver, copper, silver, making them impact resistant, minimising the risk of detachment. \u003cbr\u003e\u003cbr\u003eThese are exceptionally high quality track saw blades manufactured and designed for the professional woodworker who demands true and precise sawing results. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338309361971,"sku":"R1507","price":30.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R1507.jpg?v=1686325898"},{"product_id":"tapered-cutting-jig","title":"Tapered Cutting Jig","description":"\u003cp\u003eThis tapered cutting jig is designed for use on a table saw and will allow you to accurately cut gentle tapers up to 15º. The jig is used against a table saw fence to allow you to cut workpieces at a desired angle, angles which were previously not safely possible when only using the fence or trying to cut freehand. The jig is held against the rip fence and opened and securely locked at the desired angle. The timber is then pushed up against the end stop on the jig, and both the jig and workpiece are moved along the rip fence to create the required taper on the workpiece.\u003cbr\u003e\u003cbr\u003eThe jig is constructed from sturdy aluminium extrusion for strength and durability, the material also slides easily against a fence and tabletop for smooth operation. The jig can be used either left or right-handed and has an overall length of 610mm and is 32mm square. ©\u003cbr\u003e\u003cbr\u003eAlways refer to your machinery instruction manuals for safety advice.\u003c\/p\u003e","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338311164211,"sku":"R1520","price":20.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/files\/R1520_black.jpg?v=1757937105"},{"product_id":"no-3-smoothing-plane","title":"No 3 Smoothing Plane","description":"\u003cb\u003eBench Planes\u003c\/b\u003e\u003cbr\u003eManufactured to British Standards, Rutlands® hand planes are recommended by discerning cabinetmakers and carpentry instructors for their superb construction, finish and performance. Using world leading manufacturing techniques, each precision ground plane represents a serious alternative to the premium brands produced in North America. The planes use the reliable bedrock design that gives maximum stability and support for the cutting iron during use as the frog extends all the way to the sole to provide support at its cutting edge. The renowned design has a screw mechanism that allows the frog to be adjusted without removing the blade or lever cap, easily allowing the blade to be adjusted relative to the sole to adjust the mouth opening. It can be made narrow for fine shavings or opened for coarse material. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eNo 3 Smoothing Plane\u003c\/b\u003e\u003cbr\u003eA smoothing plane is designed for general smoothing, finishing and trimming work. With a shorter sole, it can effortlessly create a smooth surface by following any slight contours in the workpiece and reaching parts a larger plane may have missed. A number 3 plane has more precision and is used on smaller, finer projects. The plane features a lateral adjustment level that is used to ensure the blade sits square to the mouth opening. The blade can also be adjusted vertically using a knurled brass knob to change the depth of cut. The plane has an overall length of 235mm, is 56mm wide and weighs 1.97kg. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eMaterials \u0026amp; Manufacturing\u003c\/b\u003e\u003cbr\u003eThe plane body features a heavy, stress relieved ductile iron casting which is precision machined to ensure the sole is flat and square to the sides. The plane is fitted with a T10 high carbon steel tool blade which can take a keen edge, and that has been hardened to RC60-64 for maximum edge retention. A thick stainless steel cap iron and a chipbreaker supports the blade against the full length frog for less chatter and tearout. The front knob and handle are made from solid bubinga wood which provides a firm and comfortable grip. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338316112179,"sku":"R1704","price":95.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R1704.jpg?v=1686326297"},{"product_id":"no-4-smoothing-plane","title":"No 4 Smoothing Plane","description":"\u003cb\u003eBench Planes\u003c\/b\u003e\u003cbr\u003eManufactured to British Standards, Rutlands® hand planes are recommended by discerning cabinetmakers and carpentry instructors for their superb construction, finish and performance. Using world leading manufacturing techniques, each precision ground plane represents a serious alternative to the premium brands produced in North America. The planes use the reliable bedrock design that gives maximum stability and support for the cutting iron during use as the frog extends all the way to the sole to provide support at its cutting edge. The renowned design has a screw mechanism that allows the frog to be adjusted without removing the blade or lever cap, easily allowing the blade to be adjusted relative to the sole to adjust the mouth opening. It can be made narrow for fine shavings or opened for coarse material. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eNo 4 Smoothing Plane\u003c\/b\u003e\u003cbr\u003eA smoothing plane is designed for general smoothing, finishing and trimming work. With a shorter sole, it can effortlessly create a smooth surface by following any slight contours in the workpiece and reaching parts a larger plane may have missed. The plane features a lateral adjustment lever that is used to ensure the blade sits square to the mouth opening. The blade can also be adjusted vertically using a knurled brass knob to change the depth of cut. The plane has an overall length of 250mm, is 62mm wide and weighs 2.17kg. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eMaterials \u0026amp; Manufacturing\u003c\/b\u003e\u003cbr\u003eThe plane body features a heavy, stress relieved ductile iron casting which is precision machined to ensure the sole is flat and square to the sides. The plane is fitted with a T10 high carbon steel tool blade which can take a keen edge, and that has been hardened to RC60-64 for maximum edge retention. A thick stainless steel cap iron and a chipbreaker supports the blade against the full length frog for less chatter and tearout. The front knob and handle are made from solid bubinga wood which provides a firm and comfortable grip. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338316603699,"sku":"R1705","price":95.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R1705.jpg?v=1686326307"},{"product_id":"no-6-fore-plane","title":"No 6 Fore Plane","description":"\u003cb\u003eBench Planes\u003c\/b\u003e\u003cbr\u003eManufactured to British Standards, Rutlands® hand planes are recommended by discerning cabinetmakers and carpentry instructors for their superb construction, finish and performance. Using world leading manufacturing techniques, each precision ground plane represents a serious alternative to the premium brands produced in North America. The planes use the reliable bedrock design that gives maximum stability and support for the cutting iron during use as the frog extends all the way to the sole to provide support at its cutting edge. The renowned design has a screw mechanism that allows the frog to be adjusted without removing the blade or lever cap, easily allowing the blade to be adjusted relative to the sole to adjust the mouth opening. It can be made narrow for fine shavings or opened for coarse material. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eNo 6 Fore Plane\u003c\/b\u003e\u003cbr\u003eA fore plane excels at flattening large surfaces such as panels, tabletops and workbench tops prior to smoothing. Having a larger footprint than a smaller plane, this fore plane will not follow the contours of the worksurface and therefore level off any peaks or troughs in the wood. The plane features a lateral adjustment lever that is used to ensure the blade sits square to the mouth opening. The blade can also be adjusted vertically using a knurled brass knob to change the depth of cut. The plane has an overall length of 450mm, is 72mm wide and weighs 4kg. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eMaterials \u0026amp; Manufacturing\u003c\/b\u003e\u003cbr\u003eThe plane body features a heavy, stress relieved ductile iron casting which is precision machined to ensure the sole is flat and square to the sides. The plane is fitted with a T10 high carbon steel tool blade which can take a keen edge, and that has been hardened to RC60-64 for maximum edge retention. A thick stainless steel cap iron and a chipbreaker supports the blade against the full length frog for less chatter and tearout. The front knob and handle are made from solid bubinga wood which provides a firm and comfortable grip. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338316767539,"sku":"R1707","price":150.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R1707.jpg?v=1686326326"},{"product_id":"no-62-low-angle-jack-plane","title":"No 62 Low Angle Jack Plane","description":"\u003cb\u003eBench Planes\u003c\/b\u003e\u003cbr\u003eManufactured to British Standards, Rutlands® hand planes are recommended by discerning cabinetmakers and carpentry instructors for their superb construction, finish and performance. Using world leading manufacturing techniques, each precision ground plane represents a serious alternative to the premium brands produced in North America. The planes use the reliable bedrock design that gives maximum stability and support for the cutting iron during use as the frog extends all the way to the sole to provide support at its cutting edge. The renowned design has a screw mechanism that allows the frog to be adjusted without removing the blade or lever cap, easily allowing the blade to be adjusted relative to the sole to adjust the mouth opening. It can be made narrow for fine shavings or opened for coarse material. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eNo 62 Low Angle Jack Plane\u003c\/b\u003e\u003cbr\u003eA jack plane has been designed to be used across the grain and will perform trimming, flattening and stock removal tasks accurately and effortlessly. The low angle design of this plane is perfect for working on end grain and initial smoothing. The plane features a lateral adjustment lever that is used to ensure the blade sits square to the mouth opening. The blade can also be adjusted vertically using a knurled brass knob to change the depth of cut. The plane has an overall length of 355mm, is 62mm wide and weighs 2.6kg. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eMaterials \u0026amp; Manufacturing\u003c\/b\u003e\u003cbr\u003eThe plane body features a heavy, stress relieved ductile iron casting which is precision machined to ensure the sole is flat and square to the sides. The plane is fitted with a T10 high carbon steel tool blade which can take a keen edge, and that has been hardened to RC60-64 for maximum edge retention. A thick stainless steel cap iron and a chipbreaker supports the blade against the full length frog for less chatter and tearout. The front knob and handle are made from solid bubinga wood which provides a firm and comfortable grip. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338317553971,"sku":"R1708","price":120.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R1708.jpg?v=1711446576"},{"product_id":"no-7-jointer-plane","title":"No 7 Jointer Plane","description":"\u003cb\u003eBench Planes\u003c\/b\u003e\u003cbr\u003eManufactured to British Standards, Rutlands® hand planes are recommended by discerning cabinetmakers and carpentry instructors for their superb construction, finish and performance. Using world leading manufacturing techniques, each precision ground plane represents a serious alternative to the premium brands produced in North America. The planes use the reliable bedrock design that gives maximum stability and support for the cutting iron during use as the frog extends all the way to the sole to provide support at its cutting edge. The renowned design has a screw mechanism that allows the frog to be adjusted without removing the blade or lever cap, easily allowing the blade to be adjusted relative to the sole to adjust the mouth opening. It can be made narrow for fine shavings or opened for coarse material. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eNo 7 Jointer Plane\u003c\/b\u003e\u003cbr\u003eA jointer plane has the weight and accuracy needed for jointing. The plane is the longest of the standard bench planes and is the perfect length to remove peaks, troughs and undulations from the edges and surfaces of boards. Its primary function in the workshop is to square up the edges of boards so the fit perfectly together for jointing. The plane features a lateral adjustment lever that is used to ensure the blade sits square to the mouth opening. The blade can also be adjusted vertically using a knurled brass knob to change the depth of cut. The plane has an overall length of 555mm, is 72mm wide and weighs 4.4kgs. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eMaterials \u0026amp; Manufacturing\u003c\/b\u003e\u003cbr\u003eThe plane body features a heavy, stress relieved ductile iron casting which is precision machined to ensure the sole is flat and square to the sides. The plane is fitted with a T10 high carbon steel tool blade which can take a keen edge, and that has been hardened to RC60-64 for maximum edge retention. A thick stainless steel cap iron and a chipbreaker supports the blade against the full length frog for less chatter and tearout. The front knob and handle are made from solid bubinga wood which provides a firm and comfortable grip. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338317619507,"sku":"R1709","price":160.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R1709.jpg?v=1686326346"},{"product_id":"no-93-shoulder-plane","title":"No 93 Shoulder Plane","description":"\u003cb\u003eShoulder Planes\u003c\/b\u003e\u003cbr\u003eManufactured to British Standards, Rutlands® hand planes are recommended by discerning cabinetmakers and carpentry instructors for their superb construction, finish and performance. Using world leading manufacturing techniques, each precision ground plane represents a serious alternative to the premium brands produced in North America. The shoulder planes use the classic Edward Preston design but have an adjustable mouth which closes for very fine shavings with minimal tearout and opens for coarse material. There is also a screw mechanism that easily allows the blade to be varied in depth relative to the sole to change the depth of cut. The planes have a narrow body design and the blades sit slightly proud for the cleaning out of corners. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eNo 93 Shoulder Plane\u003c\/b\u003e\u003cbr\u003eThis is the largest and heaviest shoulder plane available making it the easiest to control and use. The additional weight offers increased stability and registration when working up to an edge. This is the perfect plane for trimming tenon shoulders and precise rebating. The plane has an overall length of 210mm, is 95mm wide and weighs 1.8kg. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eMaterials \u0026amp; Manufacturing\u003c\/b\u003e\u003cbr\u003eThe plane body features an unbreakable CR40 steel casting which is precision machined to ensure the sole is flat and square to the sides. The plane is fitted with a T10 high carbon steel tool blade which can take a keen edge, and that has been hardened to RC60-64 for maximum edge retention. The 15° low bed angle combined with the 25° blade bevel gives a cutting angle of 40° for exceptional end grain cutting performance. A stainless steel swan neck lever arm secures the blade to the plane to reduce chatter during use. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338318504243,"sku":"R1712","price":95.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R1712.jpg?v=1686326374"},{"product_id":"no-97-chisel-plane","title":"No 97 Chisel Plane","description":"\u003cb\u003eChisel Planes\u003c\/b\u003e\u003cbr\u003eManufactured to British Standards, Rutlands® hand planes are recommended by discerning cabinetmakers and carpentry instructors for their superb construction, finish and performance. Using world leading manufacturing techniques, each precision ground plane represents a serious alternative to the premium brands produced in North America. A chisel plane has a noseless shape with a body width blade making them ideal planes for cleaning up and finishing a project. The design makes it the perfect choice for removing dried glue, cutting dowels and plugs flush to the surface of the wood, tidying up dovetail joints and even cleaning up rabbets and grooves. There is also a screw mechanism that easily allows the blade to be varied in depth relative to the sole to change the depth of cut. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eNo 97 Large Chisel Plane\u003c\/b\u003e\u003cbr\u003eThe large chisel plane is sized for larger cleaning and trimming jobs. The additional weight offers increased stability and registration when working up to an edge. The plane has an overall length of 240mm, is 57mm wide and weighs 1.6kg. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eMaterials \u0026amp; Manufacturing\u003c\/b\u003e\u003cbr\u003eThe plane body features an unbreakable CR40 steel casting which is precision machined to ensure the sole is flat and square to the sides. The plane is fitted with a T10 high carbon steel tool blade which can take a keen edge, and that has been hardened to RC60-64 for maximum edge retention. The 15° low bed angle combined with the 25° blade bevel gives a cutting angle of 40° for exceptional end grain cutting performance. The blade is secured with a stainless steel cap and there is a chipbreaker to ensure a chatter free cut. The plane is completed with an oiled, solid bubinga knob that sits at an angle to ensure a comfortable grip in the hand. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338318962995,"sku":"R1715","price":90.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R1715.jpg?v=1686326403"},{"product_id":"blade-for-no-91-shoulder-plane","title":"Blade for No 91 Shoulder Plane","description":"\u003cp\u003eReplacement blade for No 91 Shoulder Plane. Constructed from T10 high carbon steel which can take a keen edge, hardened to RC60-64 for maximum edge retention. ©\u003c\/p\u003e","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338325844275,"sku":"R1762","price":8.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R1762.jpg?v=1686326559"},{"product_id":"woodturning-lathe-extension-bed-r2100-and-r2103","title":"Woodturning Lathe Extension Bed - R1 and R2","description":"\u003cp\u003eDesigned specifically to fit the R2100 and R2103 woodturning lathes, this extension will increase the spindle turning capacity of the lathe to 1230mm and 1300mm respectively. Manufactured from cast iron the face and ends of the extension are precision CNC machined to ensure prefect alignment with the existing lathe bed. Simply join the two sections with the supplied allen head bolts. Once positioned the tailstock will slide up and down the bed ensuring perfect headstock and tailstock alignment. Two heavy duty rubber feet absorb and minimise vibration. Set up takes no more than a couple of minutes.©\u003c\/p\u003e","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338341835059,"sku":"R2109","price":50.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R2109.jpg?v=1762853875"},{"product_id":"t-bar-clamps-1200mm-pack-of-4","title":"T Bar Clamps - 1200mm - Pack of 4","description":"T Bar clamps are the strongest clamps available and will not twist or warp under any amount of load. These clamps are constructed from a thick T cross section made of high quality cold drawn steel. Cold drawn steel has greater tensile strength than standard hot rolled steel making these clamps capable of heavy duty, high pressure clamping, comfortably exerting up to 19000N of pressure on the workpiece. Used to clamp the largest scale projects where a considerable clamping force is required such as cabinets, doors, worktops and panels. The clamping head and slide are made from grey cast iron and are guaranteed not to break during use. Both the slide and head feature flat bottoms for unsupported clamping and drilled feet for more permanent bench mounting. The jaws are slightly tapered inwards towards each other so when under clamping pressure they become parallel for positive non slip clamping.\u003cbr\u003e\u003cbr\u003eThe head and slide are epoxy powder coated for durability and have been precision machined so that they glide freely and easily along the main bar. The slide can be positioned anywhere on the bar using the predrilled locating holes and is held firmly in position using a solid steel pin. This sturdy steel pin will not bend or break even under maximum load. The head features an extremely hard-wearing steel rolled acme thread which enables smooth, fast clamping. A steel tommy bar coupled with the fast action thread enables the maximum force to be exerted onto your work piece with ease. Supplied in packs of 4. The clamps are made and assembled by the world's leading clamp manufacturer who also produce the most well-known brand of sash clamps. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338356646195,"sku":"R3000X4","price":100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R3000X4.jpg?v=1686328620"},{"product_id":"aluminium-sash-clamps-with-feet-900mm-pack-of-4","title":"Aluminium Sash Clamps with Feet - 900mm - Pack of 4","description":"These aluminium sash clamps with supporting feet are an upgrade on the traditional aluminium sash clamps while still maintaining the original's features and benefits. The upgrade being the addition of cast iron feet at both ends of the clamps. The feet allow the clamps to stand freely and securely on your work surface. This means your workpiece can be clamped during glue ups without the risk of the clamps ever falling over. Constructed from a sturdy flat aluminium beam with large surface area cast iron heads and tails that measure 50mm high x 45mm wide they can exert high pressure without deforming and are also tapered towards each other to enable true parallel clamping. \u003cbr\u003e\u003cbr\u003eThe clamps are fully adjustable as the tail can be locked off in 25mm increments and the lead screw has a travel of 45mm. The smooth running rolled acme threaded bar provides easy and rapid movement of the clamp head and is wound by a crank handle to maximise the force exerted. The feet elevate the clamp adequately so that the handle can be wound without obstruction. These clamps have a large clamping capacity of 900mm and because of the aluminium construction an additional benefit is that the bar will not mar the surface of your workpiece. Weighing only 1.25kgs they still exert an impressive 8000N of clamping force.  Supplied in packs of 4. A welcome improvement on our traditional aluminium sash clamps. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338360217907,"sku":"R3010X4","price":50.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R3010X4.jpg?v=1686328796"},{"product_id":"aluminium-sash-clamps-with-feet-1200mm-pack-of-4","title":"Aluminium Sash Clamps with Feet - 1200mm - Pack of 4","description":"These aluminium sash clamps with supporting feet are an upgrade on the traditional aluminium sash clamps while still maintaining the original's features and benefits. The upgrade being the addition of cast iron feet at both ends of the clamps. The feet allow the clamps to stand freely and securely on your work surface. This means your workpiece can be clamped during glue ups without the risk of the clamps ever falling over. Constructed from a sturdy flat aluminium beam with large surface area cast iron heads and tails that measure 50mm high x 45mm wide they can exert high pressure without deforming and are also tapered towards each other to enable true parallel clamping.\u003cbr\u003e\u003cbr\u003eThe clamps are fully adjustable as the tail can be locked off in 25mm increments and the lead screw has a travel of 45mm. The smooth running rolled acme threaded bar provides easy and rapid movement of the clamp head and is wound by a crank handle to maximise the force exerted. The feet elevate the clamp adequately so that the handle can be wound without obstruction. These clamps have a large clamping capacity of 1200mm and because of the aluminium construction an additional benefit is that the bar will not mar the surface of your workpiece. Weighing only 1.38kgs they still exert an impressive 8000N of clamping force. Supplied in packs of 4. A welcome improvement on our traditional aluminium sash clamps. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338360676659,"sku":"R3011X4","price":70.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R3011X4.jpg?v=1686328821"},{"product_id":"forged-f-clamps-300mm-x-80mm-pack-of-6","title":"Forged F Clamps - 300mm x 80mm - Pack of 6","description":"Being fully forged from a single length of high-quality carbon steel means these clamps are more resilient than cast iron F clamps. With each clamp producing 1500N of clamping force, these drop forged steel F clamps will prove an invaluable addition to your workshop. The bar and sliding arm are fully galvanized to prevent corrosion and increase the working life of the clamp. The sliding clamping arm is designed to not slip against the main bar when exerting its maximum clamping pressure. The steel tommy bar allows for easy, controlled transfer of force when tightening, making sure your work is held securely as quickly as possible. The fast action rolled acme thread is precision machined to enable smooth fast clamping and is tipped with a ball jointed clamping pad to allow tapered pieces to be clamped effectively.\u003cbr\u003e\u003cbr\u003eThe main bar is made of a single piece of 16mm x 8mm I profiled steel that prevents the bar from flexing when clamping and maximises strength and durability. This clamp has a capacity of 300mm and a throat depth of 80mm. They can be used in most of your projects, especially when quick, strong clamping pressure is needed. Supplied in packs of 6. A welcome addition to any clamp collection. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338364248371,"sku":"R3024X6","price":40.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R3024X6.jpg?v=1686329077"},{"product_id":"forged-f-clamps-600mm-x-80mm-pack-of-6","title":"Forged F Clamps - 600mm x 80mm - Pack of 6","description":"Being fully forged from a single length of high-quality carbon steel means these clamps are more resilient than cast iron F clamps. With each clamp producing 1500N of clamping force, these drop forged steel F clamps will prove an invaluable addition to your workshop. The bar and sliding arm are fully galvanized to prevent corrosion and increase the working life of the clamp. The sliding clamping arm is designed to not slip against the main bar when exerting its maximum clamping pressure. The steel tommy bar allows for easy, controlled transfer of force when tightening, making sure your work is held securely as quickly as possible. The fast action rolled acme thread is precision machined to enable smooth fast clamping and is tipped with a ball jointed clamping pad to allow tapered pieces to be clamped effectively.\u003cbr\u003e\u003cbr\u003eThe main bar is made of a single piece of 16mm x 8mm I profiled steel that prevents the bar from flexing when clamping and maximises strength and durability. This clamp has a capacity of 600mm and a throat depth of 80mm. They can be used in most of your projects, especially when quick, strong clamping pressure is needed. Supplied in packs of 6. A welcome addition to any clamp collection. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338364379443,"sku":"R3025X6","price":50.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R3025X6.jpg?v=1686329092"},{"product_id":"steel-spring-clamps-50mm-pack-of-10","title":"Steel Spring Clamps - 50mm - Pack of 10","description":"These steel spring clamps should be abundant in every workshop because they are so quick and easy to use. Made from steel that has been plated with zinc for strength and durability. The spring is made from high carbon steel for fast, reliable opening and closing. The jaws and handles are covered with plastic-vinyl to aid application and hold the work securely without marring, even when gripping at an angle.\u003cbr\u003e\u003cbr\u003eThese clamps have a capacity of 50mm, throat depth of 60mm and produce an impressive 150N of clamping force for such a small clamp. They will last a lifetime because of their zinc plated steel construction. \u003cbr\u003e\u003cbr\u003eSupplied in packs of 10. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338377355571,"sku":"R3059X10","price":15.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R3059X10.jpg?v=1686329575"},{"product_id":"g-clamps-150mm-pack-of-10","title":"G Clamps - 150mm - Pack of 10","description":"G clamps are the original type of screw clamp and are used when high clamping forces are required for woodwork, metalwork and fabricating applications. The drop forged frames have an I beam section which prevents the clamps from twisting, making them incredibly strong and break resistant.\u003cbr\u003e\u003cbr\u003eThe steel main screw features a rolled acme thread which ensures rapid, smooth movement through the CNC machined clamp frames. The clamping shoes swivel allowing the clamps to exert even pressure on both flat and angled workpieces. The tommy bars are made from a tool steel which is hardened and tempered to allow for high levels of torque to be applied by hand.  The frames of the clamps are finished with a durable baked enamel epoxy paint which is both rust and chip resistant. These clamps have a 150mm clamping capacity with a clamping force of 5000N. Supplied in packs of 10. The clamps are made and assembled by the world's leading clamp manufacturer who also produce the most well-known brand of G clamps. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338380108083,"sku":"R3064X10","price":50.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R3064X10.jpg?v=1686329661"},{"product_id":"deep-throat-g-clamps-100mm-x-250mm-pack-of-6","title":"Deep Throat G Clamps - 100mm x 250mm - Pack of 6","description":"These deep throat G clamps will be invaluable in the workshop for reaching into inaccessible areas that are out of reach to standard clamps. The clamp bodies are made from high quality malleable iron which has been moulded into I profiles which will prevent the clamp from warping or twisting during use and makes them incredibly strong. The fast action acme thread is precision machined to enable smooth, fast clamping when needed. At the end of the threads are steel clamping pads which pivot to allow the clamps to exert even pressure on both flat and angles workpieces.\u003cbr\u003e\u003cbr\u003eThe clamps feature a baked enamel finish to prevent corrosion to give a long, reliable working life. These clamps have a throat depth of 250mm and a clamping capacity of 90mm. Supplied in packs of 6. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338381746483,"sku":"R3067X6","price":40.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R3067X6.jpg?v=1686329700"},{"product_id":"quick-release-vice-265mm","title":"Quick Release Vice - 265mm","description":"This quick release vice is cast, machined and assembled by the world's leading and largest vice manufacturer, who have been established since 1950. The body of the vice is precision CNC machined from solid grey iron castings, a material recognised for its wear resistance and high compressive strength. \u003cbr\u003e\u003cbr\u003eThe vice has a class leading clamping force of 19000N for assured workholding. The 265mm wide front jaw is fractionally tapered toward the rear jaw, so that when under clamping pressure the jaws become parallel for  positive non slip clamping. The lead screw is made from hardened and tempered steel and features a buttress thread that ensures fast, smooth and controlled movement. Buttress threads are stronger in shear than any other power thread, combining the high efficiency of a square thread with the high strength of a V thread.\u003cbr\u003e\u003cbr\u003eThe advantage of this quick release vice is that by depressing the front trigger, the lead screw disengages from the cast nut allowing you to slide the jaw back and forth with one hand. Once you workpiece is position, release the trigger and clamp up using the tommy bar. \u003cbr\u003e\u003cbr\u003eBoth front and rear jaws are pre-drilled to accept wood sub fences to protect the surface of the workpiece and the front jaw features a height adjustable dog for clamping against a bench dog on your workbench. The castings of the vice are finished in an epoxy powder paint that is extremely hard wearing, chip and corrosion resistant. This is a premium quality, premium performance quick release vice that can be found in professional woodworkers workshops worldwide. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338385678643,"sku":"R3082","price":80.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R3082.jpg?v=1686329854"},{"product_id":"tail-vice-screw-260mm","title":"Tail Vice Screw - 260mm","description":"Tail vice screws can be added to an existing work bench or built into a new one. Tail vices fit to the end of a work bench top, either to the left or the right and are commonly used in conjunction with bench dogs when you require an unobstructed workpiece for tasks such as planing, routing, sanding and carving.\u003cbr\u003e\u003cbr\u003eThe 30mm diameter lead screw has a fast action Acme thread which runs in CNC machined grey iron castings to ensure a smooth controlled movement. The tail vice has an overall length of 440mm and an open capacity of 260mm. The castings are finished in an epoxy powder coating which is both hard wearing and corrosion resistant. This vice is cast, machined and assembled by the world's leading and largest vice manufacturer, who have been established since 1950. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338387218739,"sku":"R3085","price":20.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R3085.jpg?v=1686329904"},{"product_id":"multi-purpose-vice-with-clamp-63mm","title":"Multi Purpose Vice with Clamp - 63mm","description":"Quickly secured to any work surface up to 40mm thick this multi purpose vice is the practical choice for home, garage and small workshop applications. The head rotates through 360° and features two sets of jaws. One pair of jaws measures 38mm wide by 16mm high and are smooth faced to protect the surface of the workpiece, whilst the other set measure 63mm wide by 16mm high and are serrated for powerful work holding and feature V notches for holding round stock.\u003cbr\u003e\u003cbr\u003eThe swivel base also rotates 360°, so you can readily position the work piece for best access. Manufactured from CNC machined, grey iron castings it features an Acme threaded main screw, for smooth, controlled movement whilst delivering an impressive clamping force up to 4500N. At the rear, the vice features a machined anvil measuring 50mm x 25mm, providing a striking surface for a variety of functions. \u003cbr\u003e\u003cbr\u003eThe main screw is fully protected from dirt and debris, preventing swarf for becoming trapped between the main screw and the cast steel nut. The castings are epoxy powder painted resulting in a hard wearing, corrosion and chip resistant finish. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338388005171,"sku":"R3088","price":25.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R3088.jpg?v=1686329959"},{"product_id":"pocket-hole-alignment-clamps-pack-of-4","title":"Pocket Hole Alignment Clamps - Pack of 4","description":"These pocket hole clamps ensure that the pocket hole joint is perfectly aligned every time, ready to be screwed together. They feature a 9.5mm pin that slots into a pre-drilled pocket which is then clamped under pressure bringing the two mating surfaces tightly together. Once positioned and with the clamp still locked in place you simply drive your screw home in an adjacent pre-drilled pocket hole. By purchasing 4 x clamps at a time you can set out and precisely position all four faces of a frame before inserting any screws. This prevents alignment issues normally associated when clamping one face at a time.\u003cbr\u003e\u003cbr\u003eMade from an impact resistant ABS plastic these clamps will enhance the joint and make pocket hole joinery much simpler and more accurate. A precision rolled acme thread and large handle makes the clamp incredibly smooth and easy to use. Each clamp has a 150mm clamping length with a body of 200mm. Supplied in packs of 4. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338390692147,"sku":"R3103X4","price":25.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R3103X4.jpg?v=1686330190"},{"product_id":"horizontal-toggle-clamp-40mm","title":"Horizontal Toggle Clamp - 40mm","description":"With traditional toggle clamps considerable time is taken setting up the clamp to suit the workpiece height, there is no setup required with these auto adjusting clamps as they automatically adjust to suit the workpiece height while maintaining a constant clamping pressure.  The clamping pressure can be set between 100N and 3000N depending on the application of the clamp and this can be adjusted easily with the simple turn of a screw. Toggle clamps are perfect for custom made jigs for your router tables or they are equally useful mounted to workbenches.\u003cbr\u003e\u003cbr\u003eThese clamps feature a horizontal base plate with standard toggle mounting holes to fix accessories to such as toggle clamp plates. Constructed from nickel coated steel forgings for strength and durability each clamp features an ergonomically designed handle to allow you to easily transfer the clamping force. The clamp can be disengaged very quickly and smoothly. Each clamp features a swivelling clamping shoe which is non-marring that can accommodate irregular shaped work.\u003cbr\u003e\u003cbr\u003eThe maximum workpiece thickness the clamps can accommodate is 40mm and they have a maximum reach of 60mm. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338392133939,"sku":"R3113","price":15.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R3113.jpg?v=1686330403"},{"product_id":"dog-fence-200mm-with-20mm-and-3-4-posts","title":"Dog Fence - 200mm with 20mm and 3\/4\" Posts","description":"A dog fence is designed to be used on any workbench or tabletop that has dog holes already drilled. The fence can be positioned where required and can be used to hold workpieces against when routing, sanding or planing. The fence has two sides, one is 15mm for use with thinner workpieces and the other is 32mm for working with thicker workpieces. Both sides are slightly tapered towards the workpiece to prevent any vertical movement of the workpiece while working. Both faces of the fence have several grooves to prevent your workpiece from slipping. \u003cbr\u003e\u003cbr\u003eThe 200mm dog fence is supplied with four 90mm long steel posts, two are 3\/4\" in diameter and the other two are 20mm, meaning they will be compatible with either of the industry standard dog hole diameters. The posts have several back tapered rings along their length which engage with the inner wall of the hole to prevent the post from being pulled upwards during use. Two T bolts screw into the posts and slide inside a T track on the base of the fence meaning the posts can be easily adjusted to suit the distance between dog holes.\u003cbr\u003e\u003cbr\u003eThe fence is made from extruded aluminium that has been anodised to provide a durable and great looking, non marring finish. The fence is 200mm in length and has a width of 55mm. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338394919219,"sku":"R3120","price":15.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R3120.jpg?v=1686330521"},{"product_id":"fibre-grip-vice-jaws-150mm","title":"Fibre Grip Vice Jaws - 150mm","description":"These fibre grip vice jaws allow a firm grip without damaging or marking your work, this is especially useful when holding soft or polished surfaces. The jaws are designed to fit most vices with the malleable steel lugs able to be moulded around the vice jaws. They feature a unique design which prevents the jaw tipping inwards during use to ensure that the jaw faces are constantly parallel.\u003cbr\u003e\u003cbr\u003eThe jaws are made from a durable fibre material which has been especially chosen to be hard wearing and long lasting, while being forgiving enough to ensure your workpiece will never be damaged. The fibre material is indented with 100's of small holes to aid with grip to make sure your work doesn't slip.\u003cbr\u003e\u003cbr\u003eThe jaws are sold in pairs and have a surface area of 28mm x 155mm. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338398884147,"sku":"R3153","price":5.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R3153.jpg?v=1686330716"},{"product_id":"fence-clamps-pack-of-2","title":"Table Saw Fence Clamps - Pack of 2","description":"This simple but extremely effective pair of clamps allows you to attach a wooden sub-fence to the fence on your bandsaw, bench saw, router table or planer. You simply drill two 10mm diameter holes vertically in the wooden sub fence and then adjust the width of the clamp to reach over your machine standard fence. \u003cbr\u003e\u003cbr\u003eYou have two adjustments; one is by rotating the knob and the other is by rotating the L shaped acme threaded bar. The capacity range is 20mm to 80mm assuming for a 20mm wide sub-fence. The main body is manufactured from anodised aluminium and the threaded bar is made from a hardened steel. Supplied as a pack of two these clamps allow you to add a sub-fence to help protect your workpiece and your original machine fence from damage. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338402619699,"sku":"R3174","price":10.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R3174.jpg?v=1686330997"},{"product_id":"cable-clamp-small-pack-of-10","title":"Cable Clamp - Small - Pack of 10","description":"These ratchet cable clamps can easily be used in the home or workshop and have a multitude of applications for woodworkers, joiners, electricians, and plumbers. Revolutionary in their design these clamps represent the perfect solution to real-life cable management problems. The clamps are safe to use anywhere in the home, office, workshop, garage, boat and anywhere else wires, cables, hoses, or ropes need to be kept in order. Unlike single use cable ties, these re-usable cable clamps cannot be overtightened making them the ideal solution for delicate cables.\u003cbr\u003e\u003cbr\u003eMade from tough polymer plastic and stainless steel, these cable clamps are extremely strong and may be used over and over again without any deterioration in performance and do not mark or leave sticky residues like adhesive tapes do. Self-aligning, self-adjusting and self-locking these clamps are easy to use single handed making clamping fast and simple. Each clamp has 8 locking positions and is easily opened using the thumb tab. \u003cbr\u003e\u003cbr\u003eThe clamps have a maximum capacity of 28mm x 20mm and a minimum capacity of 20mm x 13mm. Supplied in a pack of 10. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338403832115,"sku":"R3176X10","price":5.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R3176X10.jpg?v=1686331042"},{"product_id":"cable-clamp-large-pack-of-10","title":"Cable Clamp - Large - Pack of 10","description":"These ratchet cable clamps can easily be used in the home or workshop and have a multitude of applications for woodworkers, joiners, electricians, and plumbers. Revolutionary in their design these clamps represent the perfect solution to real-life cable management problems. The clamps are safe to use anywhere in the home, office, workshop, garage, boat and anywhere else wires, cables, hoses, or ropes need to be kept in order. Unlike single use cable ties, these re-usable cable clamps cannot be overtightened making them the ideal solution for delicate cables like CAT 5 and fibre optic cables as well as for hoses.\u003cbr\u003e\u003cbr\u003eMade from tough polymer plastic and stainless steel, these cable clamps are extremely strong and may be used over and over again without any deterioration in performance and do not mark or leave sticky residues like adhesive tapes do. Self-aligning, self-adjusting and self-locking these clamps are easy to use single handed making clamping large coils of air or garden hose fast and simple. Each clamp has 10 locking positions and is easily opened using the thumb tab. \u003cbr\u003e\u003cbr\u003eThe clamps feature a hole allowing the clamp to be hung up and have a maximum capacity of 79mm x 80mm and a minimum capacity of 70mm x 40mm. Supplied in a pack of 10. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338405503283,"sku":"R3178X10","price":10.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R3178X10.jpg?v=1686331080"},{"product_id":"pinch-dog-clamps-pack-of-10","title":"Pinch Dog Clamps - Pack of 10","description":"These cast iron pinch dogs allow you to clamp directly over your glue line to securely hold your joint until the glue dries. They are driven into end grain to pull joints together in a unique way which cannot be achieved by sash or parallel jaw clamps. Traditionally used when gluing up panels, tables or bench tops but they can also be used for many other clamping operations around the workshop. \u003cbr\u003e\u003cbr\u003eConstructed from cast iron and measuring 38mm wide the dogs have high tensile strength and ductility making them virtually unbreakable as they are driven into your workpiece. The two legs feature sharp points which are easily driven into your work. The dogs are simply removed after use and can be reused an unlimited number of times. Supplied in a pack of 10. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338407403827,"sku":"R3180X10","price":15.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R3180X10.jpg?v=1686331110"},{"product_id":"rare-earth-magnets-pack-of-100","title":"Rare Earth Magnets - Pack of 100","description":"Only when you have actually used rare-earth magnets, will you appreciate their strength. Rare earth magnets are strong permanent magnets made from alloys of rare earth elements and they are the strongest type of permanent magnets made. They produce significantly stronger magnetic fields than other types such as ferrite or alnico magnets. Only people with extremely strong hands and fingers will be able to pull apart any of these magnets unaided.\u003cbr\u003e\u003cbr\u003eWoodworkers find them excellent for use as catches on cabinet doors, boxes and cupboards and for holding keys or wrenches to machines in the workshop, plus they can be mounted with almost any glue. They are also perfect as fridge magnets that will stay put no matter what.\u003cbr\u003e\u003cbr\u003eSupplied as a pack of 100 rare earth magnets containing 12mm diameter x 4mm x 25 pieces, 10mm diameter x 3mm x 30 pieces, 5mm diameter x 2.5mm x 45 pieces. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338408321331,"sku":"R3181","price":25.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R3181.jpg?v=1686331123"},{"product_id":"bench-dogs-19mm-pack-of-2","title":"Bench Dogs - 19mm - Pack of 2","description":"These aluminium bench dogs will rigidly lock in position as they are both tapered and spring loaded. The integrated spring will securely lock the dog in position at your chosen height on your workbench. The head of each bench dog is criss cross machined to maximise work piece grip yet minimise marking and indentation. These dogs are extremely tough and will cope with excessive pressure if used in conjunction with a work bench vice, they are also very versatile and can be used for many applications on your workbench such as sanding, sawing, routing or any application where workpieces need to be held securely in place. \u003cbr\u003e\u003cbr\u003eThe dogs are supplied as a set of two and measure 111mm in height by 19mm in diameter. Simply drill a 19mm diameter hole in your bench top or use existing 19mm holes on your workbench for the dogs to fit securely into. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338409140531,"sku":"R3184","price":8.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R3184.jpg?v=1686331169"},{"product_id":"magnetic-jig-block","title":"Magnetic Jig Block","description":"This magnetic jig block can be used around the workshop to temporarily attach jigs, fixtures and measuring instruments to any magnetic surface. Neodymium magnets are the strongest type of permanent magnet available commercially and they are the most widely used type of rare earth magnet. The strong neodymium magnet can be turned on and off easily using the toggle switch and it produces a magnetic force of 300N which is more than enough for applications in the workshop. \u003cbr\u003e\u003cbr\u003eThe jig has two magnetic faces, one is flat and the other has a machined groove for magnetic attachment to round or square sections. \u003cbr\u003e\u003cbr\u003eThere is an M5 threaded hole in the top of the jig to allow you to secure jigs and fixtures to the block. The block measures 30x35x40mm. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338410844467,"sku":"R3190","price":15.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R3190.jpg?v=1733410215"},{"product_id":"door-stand","title":"Door Stand","description":"Holding a door in position whilst trying to route-out hinge recesses or mortice locks can be very difficult. A door stand makes the job simple, fast and effective. Made from a 3mm thick heavy gauge of hardened steel this stand will rigidly hold doors and frames up to 45kg, making it ideal when working on very heavy fire doors. The mouth of the stand accepts doors up to 50mm wide. The whole stand has been powder coated for protection and to ensure the stand will not mark the door. You simply position the door into the mouth of the stand, rotate the locking knob and a no mar swivel foot pushes the door against the wall of the mouth. Once locked off the door remains firmly in position. \u003cbr\u003e\u003cbr\u003eThe stand has a 600mm wide arm to prevent the door from tilting or rocking under load and a series of rubber pads protect the surface of the floor. Once you have completed the work required you can rotate the door to its upright position though 90 degrees whilst still in the stand. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338411106611,"sku":"R3191","price":25.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R3191.jpg?v=1686331225"},{"product_id":"parallel-jaw-clamp-blocks-pack-of-4","title":"Parallel Jaw Clamp Blocks - Pack of 4","description":"Parallel jaw clamping blocks provide excellent support for parallel jaw clamps during glue ups, they are particularly useful when attempting to securely clamp stock to form large panels. The blocks virtually take all the stress out of glue ups, by providing guaranteed support which takes away any balancing of clamps while positioning your work. The blocks will keep the clamps sturdy and aligned so you can carefully position your work, before tightening and applying your required clamping force. \u003cbr\u003e\u003cbr\u003eEach block has two perpendicular slots that are deep enough to accept two clamping bars which allows the clamps to cross at 90° for applying pressure on all 4 sides of a workpiece if needed. Each block features two screw holes that allows the blocks to be fixed to a workbench, tabletop or sacrificial worksurface. The unique system guarantees parallel alignment for strong, solid holds. Supplied in packs of 4. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338413007155,"sku":"R3195X4","price":15.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R3195X4.jpg?v=1686331297"},{"product_id":"holdfasts-400mm-x-19mm-pack-of-2","title":"Holdfasts - 400mm x 19mm - Pack of 2","description":"Holdfasts are designed as a method of holding work directly to your workbench. They are quick and easy to use because they can be secured with a single blow from a mallet. With a reach of 200mm this holdfast has a 400mm long steel shaft and a solid cast iron head.\u003cbr\u003e\u003cbr\u003e These holdfasts are compatible with 19mm bench dog holes, they are initially a loose fit which is secured with the mallet blow to give a powerful grip onto your workpiece. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338415563059,"sku":"R3204X2","price":40.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R3204X2.jpg?v=1686331424"},{"product_id":"auger-bits-set-of-6","title":"Auger Bits - Set of 6","description":"This set of 6 auger bits are the best that we have ever offered or tested and are perfect for quickly and accurately drilling deep holes through thicker stock. They can be used in a drill press or electric hand drill and are designed to be used on softwoods and hardwoods. The precise cutting geometry, a single cutting spur on the perimeter and a chisel like main cutter ensures accurate, clean holes while minimizing tearout on entry and exit of the hole. The cutting spur sits fractionally above the main cutter to ensure the bit enters the wood cleanly without tearing the wood fibres, the main cutter then follows to remove the material quickly to avoid the build-up of heat.  The bits feature a threaded centre point which pulls the bit through the wood meaning minimal force is needed for the bit to work at full capacity.  The deep flute allows fast chip removal to prevent clogging when drilling deeper holes. \u003cbr\u003e\u003cbr\u003eThe auger bits are made from high carbon steel which has been hardened to ensure a long service life and give the bits impressive cutting properties when compared to traditional steel auger bits. The bits have been fully ground to give precise concentricity to ensure a highly accurate hole. A hexagonal shaft ensures a secure hold that will not slip inside the chuck during use. Auger bits are normally used at low speeds between 700 and 2000rpm to prevent the wood from scorching. The speed depends on size, with the larger diameter bits being used at lower speeds. These bits are certified to ensure the dimensional accuracy of the hole and the set contains 8mm, 10mm, 12mm, 16mm, 20mm and 26mm bits. The overall length of the bits is 230mm with a flute length of 170mm. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338430341427,"sku":"R4036","price":25.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R4036.jpg?v=1686331909"},{"product_id":"screw-extractor-set","title":"Screw Extractor Set","description":"Trying to remove a screw or bolt with a damaged head without causing further damage to the workpiece can prove very difficult. Simply place the extractor in a drill chuck with the self centering cutting end facing out. Gently drill into the head of the screw to a depth of around 2mm. Then flip the extractor so that the spiral head is facing out and apply firm downward pressure into the drilled screw head at slow speed to remove the screw. \u003cbr\u003e\u003cbr\u003eThis set contains four bit sizes to remove various screw and bolt diameters and works on pozi, phillips, flat, hex and star headed screws and bolts. Each bit is manufactured from high speed steel which has been hardened to ensure a long service life. Supplied in a carry case. ©","brand":"Rutlands®","offers":[{"title":"Default Title","offer_id":45338452689203,"sku":"R4144","price":10.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/9194\/8595\/products\/R4144.jpg?v=1686332605"}],"url":"https:\/\/www.rutlands.com\/collections\/retiring-soon.oembed?page=3","provider":"Rutlands Limited","version":"1.0","type":"link"}