Hand Tools
Christmas Gifts
Hand Tools
A fine selection of premium performance,
precision engineered tools
 
 
 
 



Digital Angle Rule, Digital Level Box & Digital Height & Depth Gauge - Set of 3

This comprehensive set of 3 digital measuring tools will take the guesswork out of setting up your hand tools or power tools, providing precision measurements on a clear digital display. This is our most popular height and depth gauge for woodworkers and cabinetmakers.

Only [59.99]
 
BUY NOW >
 
 
 
 
 



Precision Aluminium Dual Wheel Marking Gauge

A wheel marking gauge is undoubtedly one of the most used tools by all woodworkers. It ensures accurate marking on your workpiece and allows measurement transfer as opposed to taking repeated measurements which reduces any kind of error. Two precision HSS cutting wheels cut the wood fibres cleanly, rather than tearing. This prevents the marked line from wandering and gives highly accurate lines, even on cross grain.

Only [39.99]
 
BUY NOW >
 
 
 
 
 



Digital Tape Measure

This 5 metre digital tape measure is the latest advancement in measuring technology, making measuring easier, faster and more precise. A large easy to read LCD display can be set to metric or imperial readings and you can store your reading at the touch of a button eliminating the need to write down or remember the figure.

Only [29.99]
 
BUY NOW >
 
 
 
 
 



Precision Steel Round Hole Gauge 3-15mm

An ingenious tool that lets you accurately measure the internal diameter of a hole within seconds. This will prove useful when measuring the diameter of small holes or tubes, or the width of slots. The gauge will allow you to measure any slot or hole between 3 and 15mm in very accurate 0.1mm increments. There is a long handle to easily manoeuvre the gauge into the hole. The handle features two crosshatched sleeves that aid grip and stop your fingers from slipping.

Only [39.99]
 
BUY NOW >
 
 
 
 
 



Precision Aluminium Tapered Edge T Square Rule - 200mm

This t square rule is the best of its kind available. It has all the recognised features of a normal T square rule, but it just has that added bit of thought during the design process that makes it stand out from the crowd. The edges are tapered bringing the outer graduations level with your stock, to minimise parallax error. It has been machined from a single piece of aluminium to ensure that the T head and blade are at a guaranteed 90 degrees to each other.

Only [39.99]
 
BUY NOW >
 
 
 
 
 



Parallel Jaw Clamps - 600mm x 95mm - Pack of 4

These exceptional parallel jaw clamps are the best we have ever tested. The jaws are guaranteed parallel and will always be at a constant 90° angle with the bar during use to maintain the squareness of the object being clamped. The large surface area of the jaws allow the clamps to be used in different ways to F clamps, such as clamping along the length of the jaw or behind the rail. Clamping force is equally distributed by the jaws which eliminates the crushing of timber fibres. These are parallel jaw clamps that can evenly exert up to 6000N of clamping force.

Only [99.99]
 
BUY NOW >
 
 
 
 
 



Precision Aluminium Height & Drill Bit Depth Gauge

This gauge will allow you to accurately set and secure your drill bit depth stop at the required depth on your drill bit. Simply insert your drill bit into the gauge and lock off the sliding arm at the required depth. Then slide your depth stop onto your bit, the depth stop will then be held on top of the gauge with the inbuilt magnet. You will now have two hands free to secure the depth stop to your drill bit.

Only [39.99]
 
BUY NOW >
 
 
 
 
 



Woodworking Quick Release Vice - 265mm

This quick release vice is cast, machined and assembled by the world's leading and largest vice manufacturer, who have been established since 1950. The body of the vice is precision CNC machined from solid grey iron castings, a material recognised for its wear resistance and high compressive strength. The vice has a class leading clamping force of 19000N for assured workholding.

Only [99.99]
 
BUY NOW >
 
 
 
 
 



Cast Iron Anvil - 5kg

Anvils have been around for centuries, yet they continue to be one of the most useful tools in the workshop. This anvil has been precision machined from grey cast iron castings to give a large flat working surface which is ideal for metal forming, riveting or general metal work. The surface features a 90 degree angle which you can use to shape your stock. The long tapering horn also provides varying radii when you need to bend your stock.

Only [24.99]
 
BUY NOW >
 
 
 
 
 



Aluminium Sash Clamps with Feet - 900mm - Pack of 4

These aluminium sash clamps with supporting feet are an upgrade on the traditional aluminium sash clamps while still maintaining the original's features and benefits. The upgrade being the addition of cast iron feet at both ends of the clamps. The feet allow the clamps to stand freely and securely on your work surface. This means your workpiece can be clamped during glue ups without the risk of the clamps ever falling over.

Only [59.99]
 
BUY NOW >
 
 
 
 
 



Quick Release Clamps for Multifunction Tables - Pack of 2

These clamps have been specifically designed for use with MFT multifunction woodworking tables with 20mm diameter grid pattern dog holes. They will rigidly secure the workpiece for precision routing, sanding, sawing, drilling or simply any other woodworking application. They have a low profile design to ensure a secure lateral clamping force on the edges of workpieces, which frees the worksurface of obstruction.

Only [49.99]
 
BUY NOW >
 
 
 
 
 


Wood Chisels - Bevel Edge with Split Proof Handles - Set of 8

This bevel edge chisel set is instantly recognisable due to its bi-material handle design and metal striking cap. Guaranteed split proof, the handle prevents slippage, gives improved comfort during prolonged use and reduces vibration and hand fatigue. The steel striking cap prevents the handle from mushrooming when used with a hammer. The set comprises of eight chisels, 6mm, 10mm, 13mm, 19mm, 25mm, 32mm, 38mm, and 51mm all supplied in a wooden presentation box.

Only [39.99]
 
BUY NOW >
 
 
 
 
 


Precision Steel T Rule with Pencil & 12 Leads - 400mm

This steel T rule is the most accurate way to mark a point from the edge of your workpiece, there is a marking hole every 0.25mm along the entire length of the blade. The rule also allows precise, straight, and parallel lines to be drawn at every 0.25mm from the workpiece edge. Simply insert a precision pencil into a hole and slide the T rule and pencil along to generate the line.

Only [34.99]
 
BUY NOW >
 
 
 
 
 


Precision Aluminium Straight Rule - 600mm

This is the only rule you will need, it is the only rule with features and benefits that are specific to woodworking. It has been designed to be the straightest, heaviest, and flattest rule available. Each side of the rule features a 30-degree bevelled edge that allows you to align your pencil mark in the exact place required without parallax error. The rule features two scales, a standard 0 - 600mm scale and a 300 - 0 -300mm scale which is used for finding the centre of stock.

Only [69.99]
 
BUY NOW >
 
 
 
 
 


Gyokucho Set of 3 Japanese Hand Saws

This is our best selling set of three Japanese saws and is favoured by professional cabinet makers, joiners and home woodworkers. Japanese handsaws have one stand out difference from their western counterparts; they cut on the pull stroke rather than the push stroke. Due to this single fundamental difference, Japanese saws have blades that are thinner, lighter and cut much smoother and faster. This set consists of a Dozuki, Ryoba and Kataba saw. Made in Japan.

Only [89.99]
 
BUY NOW >
 
 
 
 
 



Mitre Angle Clamp - 100mm

Not to be confused with light weight aluminium mitre clamps this clamp is made from solid grey iron castings, a material noted for its wear resistance with a high compression strength. You are guaranteed a perfect mitre every time as the thick 30mm high cast walls will not deflect under heavy load. The internal face of the castings are CNC machined to ensure that the workpiece sits true both horizontally and vertically allowing for perfect mitre joints every time.

Only [29.99]
 
BUY NOW >
 
 
 
 
 


Ratchet Cable Clamp - Mixed Pack of 30

These ratchet cable clamps can easily be used in the home or workshop and have a multitude of applications for woodworkers, joiners, electricians, and plumbers. Revolutionary in their design these clamps represent the perfect solution to real-life cable management problems. The clamps are safe to use anywhere in the home, office, workshop, garage, boat and anywhere else wires, cables, hoses, or ropes need to be kept in order. Unlike single use cable ties, these re-usable cable clamps cannot be overtightened making them the ideal solution for delicate cables like CAT 5 and fibre optic cables as well as for hoses.

Only [39.99]
 
BUY NOW >
 
 
 
 
 


MHG Wood Chisels - Bevel Edge with Hornbeam Handles - Set of 6

Comprising of six bevel edge chisels, this set of professional tools comes in a fitted wooden box. Each blade is forged in Germany from the highest quality German produced chrome vanadium, hardened to Rc-61 along its entire length and polished to a mirror finish. This set comprises six chisels: 6mm, 10mm, 12mm, 16mm, 20mm and 26mm. Overall lengths range from 244mm to 300mm.

Only [89.99]
 
BUY NOW >
 
 
 
 
 



Fast Jaw Face Frame Clamp - 150mm

These face frame clamps feature a fast jaw clamping mechanism which allows them to be applied one handed within seconds with minimal adjustment being needed to alter the clamping capacity. The clamps are perfect for pocket hole joinery due to their large clamp faces which allow you to clamp over joint lines to ensure perfectly flush seams on your work pieces.

Only [19.99]
 
BUY NOW >
 
 
 
 
 


Gyokucho Set of 3 Compact Japanese Hand Saws

An ideal addition to any tool box, this set of three compact saws comprises Dozuki and Kataba saws, both capable of starting and making mid panel cuts and a Ryoba saw. Ideal for all types of woodwork especially trim and carpentry applications, these saws are easy to use and produce a fine finish. These compact saws have soft grip handles. Made in Japan.

Only [69.99]
 
BUY NOW >
 
 
 
 
 



Workshop Multi Purpose Vice - 125mm

Weighing over 17kg this substantial vice has significant mass to absorb vibration when sawing, drilling, grinding or filing. Manufactured from CNC machined, grey iron castings it features an Acme threaded main screw, for smooth, controlled movement whilst delivering a massive and class leading clamping force up to 25000N.

Only [89.99]
 
BUY NOW >
 
 
 
 
 



Premium Aluminium Circular Drill Guide

This circular drill guide offers the stability and guidance that your drill requires to ensure each hole is drilled perfectly straight. Manufactured from aircraft-grade aluminium, a material recognised for its strength and durability, this guide has a 80mm diameter circular base which sits true to any flat workpieces and also features a V groove for drilling of round or edge stock. The head of the guide is CNC machined to accept five guide bushes 6, 7, 8, 9, and 10 mm.

Only [24.99]
 
BUY NOW >
 
 
 
 
 



Fujikawa Japanese Wood Chisels - Set of 3

Each and every one of the chisels in this set is hand made in Mr Fujikawa's workshop in Miki City, Japan. Hold one of these chisels in your hand and it is easy to see that these are genuine craftsman's tools. This limited edition set of 3 chisels consists of 12mm, 18mm and 24mm chisels each supplied in a Japanese wooden presentation case. These hand crafted chisels are beautifully made, unbelievably sharp and easy to sharpen. Made in Japan.

Only [119.99]
 
BUY NOW >
 
 
 
 
 



Precision Aluminium T Square Rule - 260mm

This rule has graduations from 0mm up to 260mm with an overall length of 300mm. The T head is 15mm high to securely lock onto the workpiece. We found this rule to be incredibly useful around the workshop and can be used in a multitude of setup and marking out applications particularly when used with sheet material and larger projects. The scale is highly precise and has been assured to +/-0.001mm over 1m.

Only [39.99]
 
BUY NOW >
 
 
 
 
 



Premium Chrome Vanadium Screwdriver Set - 52 Piece

This set comprises of 52 premium quality screwdrivers and screwdriver bits. The blades are made from chrome vanadium alloy steel which has been hardened and tempered, making them particularly resistant to twisting during high torque screwdriving. The tips of these screwdrivers are machined to offer a better interface with the screw head, in turn preventing the blade from slipping. If you have ever had the screwdriver slip and damage the screw head, you will appreciate the superior grip these screwdrivers offer.

Only [29.99]
 
BUY NOW >
 
 
 
 
 



Premium Aluminium Clamping Square Kit

The clamps supplied with this kit have been purposefully designed for clamping squares, ensuring that quick and easy clamping is always possible. The clamp consists of a star knob, a machined aluminium clamping jaw and an L shaped piece of stainless steel with a fast action acme thread. There are five holes along each square to enable you to clamp either close or further away from the joint.

Only [29.99]
 
BUY NOW >
 
 
 
 
 



Precision Steel T Rule with Pencil & 12 Leads - 200mm

This steel T rule is the most accurate way to mark a point from the edge of your workpiece, there is a marking hole every 0.25mm along the entire length of the blade. The rule also allows precise, straight, and parallel lines to be drawn at every 0.25mm from the workpiece edge. Simply insert a precision pencil into a hole and slide the T rule and pencil along to generate the line.

Only [19.99]
 
BUY NOW >
 
 
 
 
 



Forged F Clamps - 600mm x 80mm - Pack of 6

Being fully forged from a single length of high-quality carbon steel means these clamps are more resilient than cast iron F clamps. With each clamp producing 1500N of clamping force, these drop forged steel F clamps will prove an invaluable addition to your workshop. This clamp has a capacity of 600mm and a throat depth of 80mm. They can be used in most of your projects, especially when quick, strong clamping pressure is needed.

Only [69.99]
 
BUY NOW >
 
 
 
 
 



Precision Aluminium 90 Degree Square - 200mm

A 90 degree square is an essential part of a woodworkers tool set. This extremely accurate square has been precision machined from a single piece of cast, aircraft grade aluminium by state of the art CNC equipment. The process guarantees the squareness to 0.01mm over the entire length of the blade. The accuracy of the square makes it ideal for machinery or power tool set up - table saws, jointers, or any machine where you are required to make precision cuts.

Only [39.99]
 
BUY NOW >
 
 
 
 
 



Japanese Wood Chisels Tataki Nomi - 10 Piece Set

These chisels offer an excellent introduction to Japanese nomi for those woodworkers who have never used such a chisel before. With all the features expected of a Japanese chisel, these tataki nomi have hollow ground backs to reduce friction during cutting and to make flattening the back bevel easier and the profile of the chisel is tapered for better clearance when performing deep cuts. Contains 6, 9, 12, 15, 18, 21, 24, 30, 36 and 42mm chisels. Made in Japan.

Only [229.99]
 
BUY NOW >
 
 
 
 
 



3 Way Edge G Clamps - 60mm x 70mm - Pack of 6

These 3-way edge G clamps are perfect for edging or lipping work because of their ability to clamp three faces at once. First clamp perpendicularly onto the workpiece and then use the remaining clamping arm to secure the edging or lipping. The clamp bodies are made from high quality malleable iron which has been moulded into I profiles which will prevent the clamp from warping or twisting during use and makes them incredibly strong.

Only [29.99]
 
BUY NOW >
 
 
 
 
 



Drill Press Vice - 100mm

This drill press vice is cast, machined and assembled by the world's leading and largest vice manufacturer, who have been established since 1950. The body of the vice is precision CNC machined from solid grey iron castings, a material recognised for its wear resistance and high compressive strength and has a class leading clamping force of 8000N for assured work holding.

Only [24.99]
 
BUY NOW >
 
 
 
 
 



Precision Aluminium 45° & 90° Marking Square

This marking square allows you to easily and accurately transfer markings from one face of the wood to an adjacent face. Use the square to easily mark at 45 or 90 degrees - the most popular and widely used angles. The inner edge of both windows are both 15mm from the edge of the wood which allows you to easily scribe a line from the edge of your workpiece at this preset distance.

Only [19.99]
 
BUY NOW >
 
 
 
 
 



Workshop Vice - 100mm

This workshop vice is cast, machined and assembled by the world's leading and largest vice manufacturer, who have been established since 1950. The body of the vice is precision CNC machined from solid grey iron castings, a material recognised for its wear resistance and high compressive strength and has a class leading clamping force of 15000N for assured work holding.

Only [29.99]
 
BUY NOW >
 
 
 
 
 


Buy 1 Get 1 Free

Premium Aluminium Mini Clamping Square

Measuring only 100mm x 50mm x 7mm this mini clamping square is favoured by cabinet makers when assembling fine furniture, boxes and cabinet and kitchen drawers. Manufactured from CNC machined aircraft-grade aluminium this is an extremely fine and precise assembly square. Beautifully finished in black electro-coating, which is glue, corrosion and scratch resistant, they are accurate to 0.01mm per 10mm squareness on both the outside and inside edges, to ensure consistently perfect 90° joints.

Only [24.99]
 
BUY 1 GET 1 FREE >
 
 
 
 
 



Japanese Wood Chisels Tataki Nomi - 6 Piece Set

These chisels offer an excellent introduction to Japanese nomi for those woodworkers who have never used such a chisel before. With all the features expected of a Japanese chisel, these tataki nomi have hollow ground backs to reduce friction during cutting and to make flattening the back bevel easier and the profile of the chisel is tapered for better clearance when performing deep cuts. Contains 6, 9, 12, 18, 24 and 30mm chisels. Made in Japan.

Only [129.99]
 
BUY NOW >
 
 
 
 
 


Malleable Cast Iron F Clamps - 300mm x 80mm - Pack of 10

The jaws of these clamps are made from malleable cast iron, meaning they have high tensile strength and can flex without breaking while still exerting the clamping force required. The large clamping force can be exerted without damaging your workpiece and no-mar pads are included for added protection. The bar has serrated edges on 6 faces to maximise contact with the sliding jaw to prevent it from slipping. The fast action acme thread is precision machined to enable smooth, fast clamping when needed.

Only [59.99]
 
BUY NOW >
 
 
 
 
 


Extra Wide Clamp Cutting Guide - 900mm

This clamp cutting guide is perfect for accurately cutting straight lines when using routers, saws or jigsaws. The guide can be clamped onto the workpiece with one hand and is guaranteed to be straight - no more using clamps and a straight edge to guide your power tool. Because the guide is clamped from below the workpiece there will be no obstructions above, and the high clamping strength means that the clamp will not move during use. There are three increasing clamping pressures which allows you to make small adjustments before firmly locking the clamp to your workpiece.

Only [29.99]
 
BUY NOW >
 
 
 
 
 


Ratchet Hand Clamps - 60mm - Pack of 6

These extremely useful power ratchet clamps are excellent and ideal for all kinds of clamping tasks around the workshop. Quick to deploy and release, these clamps will apply as much or as little pressure as you need. Made from fibreglass reinforced nylon these clamps have hardened steel ratchet mechanisms that keep the work under pressure and prevent the clamp from slipping or loosening under load. The thermoplastic rubber moulded handles can comfortably be used to apply the clamping force to your workpiece.

Only [34.99]
 
BUY NOW >
 
 
 
 
 



Precision Aluminium Triangle Square - 150mm

This triangle square offers definite 45 and 90 degree angles that can be used for marking, checking and setting up of machinery and power tools. The square features a lip on the front and back of its base which is used to secure it to the edge of your workpiece. The square can then be used to draw highly accurate perpendicular or 45 degree mitres with ease. Used as a set up tool, the square can be used to instantly check, or setup, the angle of your machine bed or blade, ensuring the highest degree of accuracy.

Only [29.99]
 
BUY NOW >
 
 
 
 
 


Precision Aluminium Angle Gauge

An angle gauge is used to check the bevel angle of chisels, plane blades and turning tools quickly and accurately. When sharpening tools, you should maintain the existing bevel angle, a quick check before and after with this angle gauge will allow you to do that. The angle gauge features 9 of the most commonly used angles when grinding or sharpening, these are 20, 25, 30, 40, 45, 50, 55, 60 and 65 degrees. An engineer's corner at the tip of each angle allows the angle to be measured accurately while at the same time protecting the edge of your blade. The gauge has been CNC machined from a single piece of aircraft grade aluminium.

Only [19.99]
 
BUY NOW >
 
 
 
 
 



Forged G Clamps - 200mm - Pack of 6

G clamps are the original type of screw clamp and are used when high clamping forces are required for woodwork, metalwork and fabricating applications. The drop forged frames have an I beam section which prevents the clamps from twisting, making them incredibly strong and break resistant. The steel main screw features a rolled acme thread which ensures rapid, smooth movement through the CNC machined clamp frames.

Only [69.99]
 
BUY NOW >
 
 
 
 
 


Precision Steel Bend Rule with Pencil & 12 Leads - 180mm

This steel bend rule has a 90 degree shape which allows it to comfortably sit over the corner of you workpiece, this means that you can simultaneously mark on two faces at once as well as marking right on the edge. The bend rule is very precise with three sets of marking holes every 0.5mm, one on each face and one saddling the edge. The rule also allows precise, straight, and parallel lines to be drawn at every 0.5mm relative from the workpiece edge. Simply insert a precision pencil into a guide hole and slide the bend rule and pencil along to generate the line.

Only [19.99]
 
BUY NOW >
 
 
 
 
 



Aluminium Sash Clamps - 900mm - Pack of 6

These aluminium sash bar clamps have a 900mm clamping capacity and are perfect for large capacity clamping jobs such as door and window frames, kitchen units and table and cabinet tops. They are incredibly light and easy to use meaning they are chosen over traditional steel sash bar clamps for a multitude of projects. Constructed from flat aluminium beam with large surface area ductile iron heads and tails they can exert high pressure without deforming and are also tapered towards each other to enable true parallel clamping.

Only [59.99]
 
BUY NOW >
 
 
 
 
 



Precision Aluminium Square - 200mm

A 90 degree square is perfect for machinery and power tool set up - table saws, jointers, or any machine where you are required to make precision cuts. When setting up machinery the large footprint of the tool allows it to stand unaided on the machine bed allowing handsfree setup. As well as being a highly accurate 90 degree square this square can also be used to perfectly draw parallel lines at 1mm increments from the edge of your workpiece.

Only [39.99]
 
BUY NOW >
 
 
 
 
 



Forged G Clamps - 150mm - Pack of 10

G clamps are the original type of screw clamp and are used when high clamping forces are required for woodwork, metalwork and fabricating applications. The drop forged frames have an I beam section which prevents the clamps from twisting, making them incredibly strong and break resistant. The steel main screw features a rolled acme thread which ensures rapid, smooth movement through the CNC machined clamp frames.

Only [69.99]
 
BUY NOW >
 
 
 
 
 



Clamp Rack - Pack of 2

This pack of two clamp racks allows you to store your clamps in the most efficient way possible saving valuable wall space. Perfect for smaller workshops where space is at a premium but also ideal in larger spaces where you want to maximise the wall space available. This storage solution will declutter your workshop to allow more room for other tools and machinery. The racks are very easy to install using the supplied fixings and can be remounted anywhere in your workshop.

Only [29.99]
 
BUY NOW >
 
 
 
 
 


Precision Aluminium T Square Rule - 160mm

A T Rule is the most accurate way to draw straight, parallel lines at a precise distance from the edge of your workpiece. Simply lock the large T head of the rule against your workpiece edge, insert your pencil in any of the guide holes and smoothly glide the T rule against the edge to produce a perfectly straight and parallel line. The 15mm high T head will remain in constant contact with the edge to ensure that your drawn line is as required. The rule can be used to mark in 1mm increments from the edge of your workpiece.

Only [29.99]
 
BUY NOW >
 
 
 
 
 


Buy 1 Get 1 Free

Horizontal Toggle Clamp - Auto Adjust Technology - 40mm

With traditional toggle clamps considerable time is taken setting up the clamp to suit the workpiece height, there is no setup required with these auto adjusting clamps as they automatically adjust to suit the workpiece height while maintaining a constant clamping pressure. The clamping pressure can be set between 100N and 3000N depending on the application of the clamp and this can be adjusted easily with the simple turn of a screw. Toggle clamps are perfect for custom made jigs for your router tables or they are equally useful mounted to workbenches.

Only [19.99]
 
BUY 1 GET 1 FREE >
 
 
 
 
 


Aluminium One Hand Bar Clamps - 300mm x 85mm - Pack of 4

Being made from die cast aluminium alloy these clamps will be able to withstand the strong clamping pressure they produce. The rear jaw of this clamp is spring loaded which allows small adjustments before exerting the full force of the clamp onto your workpiece. One handed bar clamps are the perfect clamp to use when working alone or working overhead. Each clamp can exert up to 3500N of force which can be transferred using just one hand. The patented pump lever mechanism is extremely easy to use and once secure is guaranteed not to slip and ruin the joints of your project.

Only [89.99]
 
BUY NOW >
 
 
 
 
 


Forged Quick Lever Clamps - 160mm x 80mm - Pack of 4

These quick lever clamps allow you to quickly apply the maximum force of 2000N to your workpiece thanks to the zinc alloy ratchet mechanism, eliminating the need to crank a handle like with traditional clamps. The ratchet mechanism is resistant to vibrations meaning the clamps will maintain their clamping pressure even if your work is vibrating heavily, making them perfect for many jobs such as drilling or sawing.

Only [59.99]
 
BUY NOW >
 
 
 
 
 


Premium Aluminium Dual Marking Gauge

This premium performance marking gauge has two independently adjustable rods for scribing both sides of a mortice at once. The rods are made from high carbon tool steel and have a precision machined flat upper face that features a laser etched metric graduation from 0 to 150mm in millimetre increments. To set the cutters to span the exact width of the chisel blade you simply register the tails of the rods against either side of the chisel and then lock off using the solid brass thumbscrews.

Only [39.99]
 
BUY NOW >
 
 
 
 
 


Mitre Angle Clamp - 56mm

Not to be confused with light weight aluminium mitre clamps this clamp is made from solid grey iron castings, a material noted for its wear resistance with a high compression strength. You are guaranteed a perfect mitre every time as the thick 19mm high cast walls will not deflect under heavy load. The internal face of the castings are CNC machined to ensure that the workpiece sits true both horizontally and vertically allowing for perfect mitre joints every time. They have a clamping force up to 4000N for assured workholding.

Only [19.99]
 
BUY NOW >
 
 
 
 
 


Precision Aluminium Edge Marking Rule - 50mm

This edge marking rule is the most accurate way to draw straight, parallel lines at a precise distance from the edge of your workpiece. Simply hold the rule against your workpiece edge, insert your pencil in any of the guide holes and smoothly glide the rule against the edge to produce a perfectly straight and parallel line. The rule has been CNC machined from aircraft grade aluminium and is perfectly flat to ensure that is sits perfectly square when locked onto the edge of your workpiece.

Only [19.99]
 
BUY NOW >
 
 
 
 
 



Gyokucho Set of 2 Japanese Hand Saws

This set comprises two of the most useful Japanese saws. The dozuki has a rip cut tooth pattern, allowing it to make fine rip cuts. The double edged ryoba saw will make fine cross and rips cuts in exotic and hardwoods and is well sized for long, deep cuts. Made in Japan.

Only [69.99]
 
BUY NOW >
 
 
 
 
 


Clamping Squares - 100mm x 100mm - Pack of 20

These 100mm x 100mm assembly squares are ideally sized for small to medium sized work such as picture framing, kitchen cabinet construction and general joint making. They keep projects square during clamping and gluing and are extremely useful when assembling frames and cabinets. Computer designed and manufactured for accuracy, these squares are made from a high impact polycarbonate, which gives them impressive strength, and they are accurate to +/- 0.05 of a degree.

Only [19.99]
 
BUY NOW >
 
 
 
 
 


Premium Joiners Workbench

Manufactured from solid, kiln dried German beech, this cabinetmaker's workbench is perfectly sized for the craftsman or home woodworker. The top is a generously sized 1500mm long x 650mm deep, including the vices (1350mm x 500mm excluding the vices), and this entire area is criss-crossed with a network of 19mm dog holes. This top is 30mm thick and made up from sections of solid beech laminated together to produce a flat, warp resistant table top with a 90mm laminated beech surround.

Only [359.99]
 
BUY NOW >