Power Tool Accessories
Christmas Gifts
Power Tool
Accessories
All the essentials you need
 
 
 
 


Precision 75 Woodturning Chuck Kit - 1" x 8tpi

The new Precision 75 Woodturning Chuck is engineered to ensure that the workpiece sits as close as possible to the headstock, therefore reducing load and minimizing wear on the main spindle bearing. This chuck is extremely strong and durable, as it is machined from a special grade of medium-tensile steel, which is normally used for the manufacture of high performance turbo impellors, pistons and gears. Using this steel allows for closer tolerances during the manufacturing process which results in excellent concentricity to minimize vibration and to ensure that a chatter-free, super fine finish can be achieved by the woodturner.

Only [99.99]
 
BUY NOW >
 
 
 
 
 



Premium Dovetail Jig

This premium dovetail jig will guide you through the process of making strong, flush fitting dovetail joints with zero complication. Tackle these notoriously difficult to cut joints with complete confidence and take your woodworking projects to the next level. This kit includes everything you need to produce elegant through, half-blind, rebated half-blind dovetails and finger joints with ease.

Only [189.99]
 
BUY NOW >
 
 
 
 
 


Premium Router Circle Compass - 690mm

This premium router circle compass will allow you to rout circles from 20mm to 690mm in diameter with ease and accuracy. The circle compass is CNC machined from solid phenolic to allow for a smooth, no-mar passage over the workpiece. You simply drill a 6mm diameter hole with the supplied drill bit and insert the round lug that is attached to the aluminium sliding arm. You then adjust and lock off the sliding arm to your desired dimension.

Only [29.99]
 
BUY NOW >
 
 
 
 
 



Premium Phenolic Lock Jig

The uniquely designed premium phenolic lock jig is the perfect tool for quick and precise lock fitting. With a fully adjustable aperture it can be used to rout mortice and faceplate recesses with a range of lengths - up to 175mm. The 4 interchangeable templates enable use with lock widths of 16mm and 19mm and faceplate widths of 25.4mm and 22.5mm. The template keyhole slots ensure quick and easy template changing.

Only [89.99]
 
BUY NOW >
 
 
 
 
 



Premium Aluminium Dowel Jig Kit

This jig kit has been specifically designed to make dowel jointing faster, simpler and with greater accuracy. Unlike conventional jigs that only allow for edge to edge jointing, with this jig you can create edge to surface joints, edge to corner joints and edge to edge joints and it features a 15mm drill guide for use with cam lock dowels. The main body of the jig features a series of five perfectly aligned holes to accept the drilling guide bushes of either 6, 8 or 10mm.

Only [99.99]
 
BUY NOW >
 
 
 
 
 



Premium Steel Pocket Hole Jig Kit

This new pocket hole jig is in a class of its own when it comes to build quality, accuracy and ease of set up. The key features found on other leading brands of jig have been combined to create one exceptional pocket hole jig. The jig is manufactured from tool steel which is precision CNC machined to ensure both clamping and drilling accuracy. A series of four holes in the base allow you to mount the jig directly to your work bench for maximum stability.

Only [69.99]
 
BUY NOW >
 
 
 
 
 



T Track Left & Right Flip Stops - 19mm - Set of 2

These flip stops are manufactured from CNC machined aircraft-grade aluminium, beautifully finished in black electro-coating and designed for extremely precise and repetitive workshop measuring. The flip stops are for use with industry standard 19mm T Tracks and are frequently used with T tracks that combine measuring scales, part no R8005X2, when making homemade mitre, router and table saw extensions.

Only [29.99]
 
BUY NOW >
 
 
 
 
 


Scale T Track - 19mm x 1000mm - Pack of 2

This T track is intended for use on home made router tables and benches and combines a T slot track with a recess for fitting the supplied self adhesive, metric measuring tape, allowing you to quickly measure distances on your fence or table without the need for a tape measure. This track measures 1000mm in length and has a 19mm wide x 9.5mm deep slot opening for use with industry standard mitre gauge bars and a lower 24mm wide T slot for use with industry standard slider T bars.

Only [34.99]
 
BUY NOW >
 
 
 
 
 



Digital Level Box

This is the latest advancement in angle sensor technology and is designed to self-calibrate if ever dropped by accident. It is the ideal tool for the accurate set up of table saw blades, jointer fences and bandsaw or drill press tables. The box allows angle measurement over a full 360° and the display read-out automatically inverts when measuring overhead, allowing the operator to view the measurement the correct way up.

Only [19.99]
 
BUY NOW >
 
 
 
 
 



Premium Guide Rail
Router Base Kit

This premium guide rail router base kit has all you need to convert your existing router into an extremely precise track router for accurate cuts every time. The guide rail router base is exceptionally well made, simple to set up and incredibly precise. It has two core functions: the first is for use with the premium guide rail for precise straight routing and the second is as a standalone router circle cutter.

Only [169.99]
 
BUY NOW >
 
 
 
 
 



Woodturning Pen Kit - No 1 & No 2 Morse Taper

This precision pen turning kit contains everything you need to make three beautiful brass plated, hardwood pens. The kit is supplied with both a No 1 and a No 2 morse taper pen mandrel, ensuring that it will work with all major brands of wood turning lathes worldwide. In addition we have had the pen mandrel extended to accept pen blanks up to 160mm in length, so no matter what size of pen or pencil you wish to turn in the future this kit will handle it with ease.

Only [89.99]
 
BUY NOW >
 
 
 
 
 




TCT Router Bit Set - 6 Piece - Door & Drawer Making - 1/2" Shank

This 6 piece raised panel door and drawer making TCT router bit set offers a complete solution to producing elegant custom cabinet and kitchen doors and drawers. This kit contains ogee rail and stile bits, an undercutting raised panel bit, drawer lock joint bit, a reversible glue joint bit and an edge moulding bit.

Only [79.99]   |   Save [20.00]
 
BUY NOW >
 
 
 
 
 



Precision 100 Woodturning Chuck Complete Kit - 1" x 8tpi

The new Precision 100 Woodturning Chuck Complete Kit is the latest advancement in work holding systems for discerning woodturners and comes with a 10 year warranty. This is our premium chuck offering and contains the Precision 100 chuck body, 70mm dovetail jaws, 75mm faceplate ring, 50mm pin jaws woodscrew chuck, 75mm ripple jaws, 45mm extended dovetail jaws, 250mm button jaws, 115mm powergrip jaws and a set of eight hardened jaw screws.

Only [199.99]
 
BUY NOW >
 
 
 
 
 



Premium Router Sled

When routing the end grain of a narrow workpiece such as rail and stile doors it is imperative that the workpiece is held both securely and safely to achieve precise results. The coping sled features a large smooth sliding phenolic base ensuring stability and control whilst a premium quality toggle clamp holds the stock firmly against the fence, allowing rails to travel through the router bit ensuring clean and square cuts.

Only [89.99]
 
BUY NOW >
 
 
 
 
 




Lock Morticer

This door lock morticer is ideal for home or trade applications, it is guaranteed to save time and is intuitively easy to use. For use on softwood, hardwood and fire doors from 30mm to 85mm thick. It has been designed to cut mortices for door locks and will also cut a recess for the lock's faceplate. Produce mortices up to 100mm deep and cut the recess for a face plate to sit in with this one tool.

Only [69.99]
 
BUY NOW >
 
 
 
 
 



Premium Phenolic Multi Function Table Jig

Multi function tables with their gridwork of holes have become established as an essential workshop item around the world. This new jig will save you money by equipping you to create unlimited replacement worktops. Using the jig could not be simpler - place your 30mm guide bush in the jig holes and plunge with a 20mm diameter router bit to accurately create your gridwork of holes. You can design and create worktops of any size and customise to your own needs by using the jig handle aperture to create multiple pockets and handles on your table.

Only [119.99]
 
BUY NOW >
 
 
 
 
 



Premium Router Radius Templates

No more searching for round objects to trace every time you wish to round off a corner; these quick and easy premium router radius templates will do the job for you. Precision CNC machined from aircraft-grade aluminium alloy; a material used extensively in aviation due to its high strength-to-weight ratio. With a higher tensile strength than pure aluminium metal, these lightweight but durable templates allow you to cut a perfect corner every time, softening the finished look of your project.

Only [29.99]
 
BUY NOW >
 
 
 
 
 



Premium Self-Centering
Doweling Jig

This premium quality, self centering dowel jig is manufactured from CNC machined aircraft-grade aluminium and beautifully finished in black electro-coating. This doweling jig automatically centres itself on any board from 10mm to 60mm wide. The jig comes with two sets of removable steel bushings for hole sizes 6, 8 and 10mm, allowing you to drill two holes of the same size at one setting.

Only [29.99]
 
BUY NOW >
 
 
 
 
 



Precision Aluminium Dado,
Mortice & Groove Gauge

This mortice and tenon gauge is used to accurately cut grooves and dadoes in your work without needing to take any measurements. Because there are no measurements being taken there is no chance of error and the width of the dado or groove will be exactly as required. Supplied in a stylish metal storage tin. If you cut any kind of groove or dado in your workshop then this tool will save you invaluable amounts of time while still being incredibly accurate.

Only [29.99]
 
BUY NOW >
 
 
 
 
 



Digital Angle Rule

This digital angle rule is an invaluable device that is both a workshop rule and an angle gauge that is perfect for laying out, angle measurement and machine or power tool setup. You can measure inside and outside angles over a full 360° in 0.1° increments. The locking function allows the precise transfer of angles while the readout can also be zeroed at any position to allow relative measurements.

Only [24.99]
 
BUY NOW >
 
 
 
 
 


TCT Router Bit Set - 7 Piece - Straight with End Cutting - 1/2" Shank

These straight with end cutting TCT router bits feature a bottom cutting edge which allows for fast and efficient plunge cutting. These bits are popular for rabbeting, grooving, mortising and cutting dadoes. With a double flute design, they feature 2 parallel cutting edges, spreading the workload over several edges rather than just one. This results in a slower and less aggressive cutting action, providing a much cleaner overall finish. The set comprises of 10mm, 12mm, 13mm, 16mm, 18mm, 20mm and 25mm straight with end cutting bits all provided with a 1/2" shank.

Only [89.99]
 
BUY NOW >
 
 
 
 
 



Premium Guide Rail Saw Base Kit

This premium guide rail saw base kit has all you need to convert your existing circular saw into a precision track saw for accurate ripping and crosscutting of panels to size. The base is designed for use with all leading brands of circular saws with blades up to 190mm in diameter. Manufactured from case-hardened aluminium to prevent bowing, the base sits over the raised central channel on the guide rail. A series of four micro-adjustment cams allow you to eliminate any play between the rail and base to ensure an ultra-smooth, precise movement along the rail.

Only [149.99]
 
BUY NOW >
 
 
 
 
 




32mm x 3 Metre Universal Power Tool Dust Hose and Adaptor Kit

This kit will prove invaluable to all users of power tool and bench top machinery, whether routing, sanding, drilling, sawing or planing. Highly recommended for use with all power tools and bench top machines such as disc and belt sanders, bobbin sanders, scroll saws, router tables and more.

Only [29.99]
 
BUY NOW >
 
 
 
 
 




TCT Router Bit - Lock Mitre

These lock mitre TCT router bits produce one of the strongest corner joints that can be created with a router. Create perfect fitting mitre joints that do not slide out of alignment during clamping, with increased surface area for glue application, strengthening the joint. These lock mitre bits are most commonly used for constructing boxes, drawers, and cabinet parts. D=34.9mm H=15.9mm A=45° T=12.9mm S=1/4".

Only [28.99]
 
BUY NOW >
 
 
 
 
 



Pocket Hole Screw Kit - 700 Piece

Including six different lengths of screws, this 700 piece pocket hole screw set contains all the screws you could need for making pocket hole joints. The screws have T20 Torx heads, recognised as the industry standard head style by cabinetmakers worldwide as they give the best grip and will not round. The screws have a large washer head giving the most surface area when tightening and also to stop the screw going through into the joining workpiece.

Only [29.99]
 
BUY NOW >
 
 
 
 
 



Precision Woodturning 13mm Drill Chuck - No 2 MT

Drill chucks are one of the most popular lathe accessories in a woodturner's armoury and can be used for both turning and drilling applications. When mounted in the headstock, you simply turn a spigot on your blank and then grip the spigot securely in the jaws of the drill chuck. When drilling you can use the drill chuck in either the head or tailstock for holding drill bit shanks from 1mm to 13mm in diameter.

Only [29.99]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit - Finger Joint - 1/2" Shank

This finger joint TCT router bit produces an incredibly strong, attractive looking joint, perfect for creating decorative corner joints on jewellery boxes, kitchen drawers and other small boxes. The large amount of surface area for glue application produced by using this bit makes for an incredibly strong and long lasting edge to edge and corner joint. This bit features a thicker, kerfed cutter on the top which extends the glue line of the joint to maximise strength. D=42mm H=38.1mm T=7mm P1=6.7mm P2=2.2mm

Only [59.99]
 
BUY NOW >
 
 
 
 
 



Dovetail Jig

This dovetail jig is designed to produce classical dovetail joints that are both beautiful and strong when making boxes, drawers and fine furniture. Extremely simple to set up and use the jig comes complete and ready to route with a half blind template and a bearing guided dovetail router bit for producing 12mm wide half blind dovetails. The body of the jig is manufactured from a heavy gauge steel pressing to prevent distortion when under load and the template is precision CNC machined from 6mm thick aluminium to ensure precise and accurate joints every time.

Only [89.99]
 
BUY NOW >
 
 
 
 
 


TCT Router Bit Set - 66 Piece - Multi Profile - 1/2" Shank

This 66 piece multi profile TCT router bit set is the ultimate collection of professional quality bits, offering incredible value for money and giving you an enormously diverse variety of choice, giving you the flexibility to take on any task with complete confidence and ease. Containing straight cutting bits, V groove bits, dovetail bits, chamfer bits, rabbeting bits, cove bits, edge moulding bits and much more, each router bit profile is clearly detailed in the wooden presentation box.

Only [199.99]   |   Save [60.00]
 
BUY NOW >
 
 
 



Precision Woodturning Crown Drive Revolving Centre - No 2 MT

These premium performance revolving centres feature a spring loaded centre point to ensure super-fast set up and dismounting of the turning blank. The spring tension can be adjusted to suit the density of the wood, simply by rotating a grubscrew. Surrounding the centre point is a series of 20 razor sharp, precision machined teeth that will not split the wood.

Only [29.99]
 
BUY NOW >
 
 
 




Buy 1 Get 1 Free

Premium Double Feather Board

This premium double feather board kit includes two single feather boards which can be used individually or they can be stacked together and used as a double feather board for supporting taller workpieces. Apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers.

Only [29.99]
 
BUY 1 GET 1 FREE >
 
 
 
 
 



Premium Router Guide Bush Set - Metric

Guide bushes are used when material is required to be routed to a set pattern or shape. They are used in conjunction with worktop jigs, lock jigs, hinge jigs, sign writing jigs and any other form of router copying template. These guide bushes are precision machined from solid brass to ensure perfect concentricity and dimensional accuracy. If a guide bush is not 100% concentric then the finished workpiece will not be a true copy of the template or jig and as such could ruin an expensive workpiece.

Only [39.99]
 
BUY NOW >
 
 
 


Premium Router Bit Holder - Pack of 2

These premium router bit holders are the perfect solution to organise and store your router bits. The holders can be easily fixed to virtually anywhere in your workshop using the two pre-milled fixing holes. They can be attached to your router table stand or they can be wall mounted. The holder will eliminate the need to search around in the back of drawers for bits, you will now be always able to have your collection within arm's length.

Only [29.99]
 
BUY NOW >
 
 
 


TCT Router Bit Set - 18 Piece - Multi Profile - 1/4" Shank

This 18 piece multi profile TCT router bit set contains the most frequently used 1/4" shank bit profiles and types, representing exceptional value for money. Take on any joining or profiling task with complete confidence and ease with this functional and decorative set, carefully selected to offer the woodworker a choice of bit for all applications. The set contains 4 straight cutting bits, a dovetail bit, 2 core box bits, 2 chamfer bits, 2 V-groove bits, a flush trim bit, a roman ogee bit, 3 roundover bits and 2 cove bits, with each profile clearly detailed in the wooden presentation box.

Only [29.99]
 
BUY NOW >
 
 
 
 
 


TCT Router Bit Set - 3 Piece - Birds Mouth - 1/2" Shank

This 3 piece birds mouth TCT router bit set allows you to create fast and accurate joints by only needing to machine one side of your workpiece. A stronger alternative to using simple mitre joints, these bits cut a notched profile for the flat edge to nest into and an increased surface area for glue application. Use these birds mouth bits to create a variety of decorative cylindrical and curved structures such as boxes, columns, arched chest lids and cones.

Only [89.99]
 
BUY NOW >
 
 
 
 
 



Premium 10mm Dowel Jig

This is a simple, no-nonsense doweling jig that will deliver strong, precise joints with minimal set up required. Dissimilar to many other doweling jigs, you do not need to transfer marks from the face of the board to the edge of the board, neither do you need to measure and mark with a tape measure. You simply set the two parts together and strike a line across the centre of the joint. The jigs transparent face and reference lines allow you to line up the jig perfectly with just that one line.

Only [14.99]
 
BUY NOW >
 
 
 
 
 



Premium Phenolic Hinge Jig with Clamping Plate

This premium phenolic hinge jig is suitable for routing recesses for fitting hinges on all doors, the adjustable sliding plate enables use with hinges 50mm-127mm long and 6.5mm-35mm wide. The jig is lightweight whilst maintaining exceptional strength and warp resistance meaning it is accurate, reliable and easy to use, with a very quick set up time. Engineered from solid grade, high-performance premium phenolic known for its exceptional strength, stability and warp resistance - as well as being totally water and liquid resistant.

Only [89.99]
 
BUY NOW >
 
 
 
 
 


Precision Woodturning Screw Chuck - 1" x 8tpi

These 50mm diameter screw chucks are precision CNC machined from tool steel to an accuracy of +/- 0.01mm to ensure perfect balance and chatter-free turning. They come supplied with three steel screws: 8mm, 10mm and 12mm in diameter, each with a 25mm deep thread, to ensure a secure hold on hard, soft and green wood blanks. These screw chucks are perfect for mounting a turning blank on the lathe to allow for initial truing up and for turning a dovetail base, ready for mounting on a chuck when bowl turning.

Only [29.99]
 
BUY NOW >
 
 
 


T Track Flip Stop with Pointer - 19mm

This flip stop is manufactured from CNC machined aircraft-grade aluminium, beautifully finished in red electro-coating and is designed for extremely precise and repetitive workshop measuring. The flip stop is for use with industry standard 19mm T Track and is frequently used with T Tracks that combine measuring scales, part no R8005X2, when making home made mitre, router and table saw extensions. Simply slide the flip stop onto the T Track and use the bristol locking handle to secure the stop in position.

Only [19.99]
 
BUY NOW >
 
 
 
 
 



Premium Mitre Gauge with Fence & Flip Stop

This is an exceptional mitre gauge, complete with a precision mitre fence and precision flip stop. It has become recognised by leading woodworkers worldwide as the go to mitre gauge for saw benches and router tables. An extremely precise, beautifully engineered mitre gauge complete with fence and flip stop that would be either an excellent upgrade to any existing table saw or as a precision mitre gauge for use on a purpose made router table.

Only [99.99]
 
BUY NOW >
 
 
 
 
 



Digital Angle Finder

This digital angle finder allows for precision angle measurement for layout work and can be used as a setup tool for machinery and power tools. It is perfect for transfer angle applications such as mitred trim work, crown moulding, roof slopes and wall corners. It is commonly used for measuring the angle inside and outside of wall corners for the precise and tight fitting of mouldings, dados, skirting and rails.

Only [39.99]
 
BUY NOW >
 
 
 
 
 



Premium Guide Rail - 1400mm

This premium guide rail allows for the making of cuts and grooves with impressive precision. The guide rail can be used as a straight edge guide, by running your circular saw or router against the edge of the guide, or it can be used in conjunction with the optional saw and router bases which mount onto the main track of the rail, allowing for the fitting of all leading power tool brands. The rail measures 1400mm in length and is manufactured from extruded aluminium that has been case-hardened to prevent bowing and has a special coating to ensure extra-smooth running.

Only [69.99]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit Set - 11 Piece - Dovetail & Straight - 1/4" Shank

This 11 piece dovetail TCT router bit set offers an incredible range of professional quality dovetail making bits. Dovetail joints are one of the most popular types of bit used in joint making, producing both strong and aesthetically pleasing joints for work such as cabinets, shelving units, drawers and boxes. These dovetail bits can also be used in conjunction with our dovetail jig, allowing you to easily create a variety of precise, reliable dovetail joints such as through, half-blind and sliding joints.

Only [69.99]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit Set - 3 Piece - Raised Panel Door - 1/2" Shank

This 3 piece raised panel door making TCT router bit set contains two of the most commonly used rail and stile bits and an 88.9mm diameter traditional raised panel bit. This set is a perfect solution to creating custom panelled doors, forming strong, perfect fitting frame joints with deep grooves to accept the edges of panels, as well as producing matching panel edges.

Only [89.99]
 
BUY NOW >
 
 
 



Precision 75 Woodturning Chuck Complete Kit - 1" x 8tpi

This complete chuck kit contains the Precision 75 chuck body, 50mm dovetail jaws, 65mm faceplate ring, 35mm pin jaws, screw chuck, 50mm ripple jaws, 35mm pen jaws, 125mm button jaws and a set of eight hardened jaw screws. This wide array of jaws allows for all popular turning projects including; pen and pencil making, spindles, bowls, goblets, candlesticks, pepper mills and it will comfortably grip and turn unseasoned and green timber.

Only [159.99]
 
BUY NOW >
 
 
 
 
 



Premium Assorted Hardwood Dowel Bucket - 400 Piece

Supplied in a reusable bucket this set contains over 400 premium quality dowels. The dowels are made from hardwood to ensure a strong secure joint, are fluted for superior glue dispersion, and have chamfered ends for easy placement and installation. There are three sizes of dowel: 200 x 6mm diameter x 30mm long, 150 x 8mm diameter x 40mm long, 50 x 8mm diameter x 60mm long.

Only [19.99]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit Set - 2 Piece - Window Sash - 1/2" Shank

This 2 piece window sash TCT router bit set is all you need to produce both custom wooden windows and glazed doors. With their elegant ogee pattern, this two-piece window sash set is designed ideally for the construction of windows from 35mm stock, however variations as narrow as 28mm can be used. Material thicker than 35mm will exceed the cutting range of the bit. These versatile bits can cut rails, stiles, sash bars and muntins, providing you the complete solution for frame construction.

Only [69.99]
 
BUY NOW >
 
 
 
 
 



T Track - 8.3mm x 1000mm - Pack of 2

This track measures 1000mm in length and has 8.3mm wide x 9.7mm deep slot opening with a lower 13.8mm wide T slot for use with industry standard T bolts and T slot nuts. The external dimensions are 18.9mm wide by 12.4mm deep. Supplied as a pack of 2 x 1000mm lengths, this track accepts the optional 60 piece hardware kit, low profile stops, flip stop, 4 way connector kit, hold down clamps, cam clamps and fast jaw bench clamps.

Only [24.99]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit Set - 6 Piece - Trimming - 1/4" Shank

This 6 piece trimming TCT router bit set provides a comprehensive collection of bits for any trimming application. Featuring perfectly balanced machined steel bodies for reduced vibration and smoother cuts, and micro-grain tungsten carbide tipped blades for long lasting sharpness and hardness. Suitable for use on softwoods, hardwoods, MDF, plywood and chipboard.

Only [69.99]
 
BUY NOW >
 
 
 
 
 



Premium Aluminium Pocket Hole Jig Kit

Manufactured from CNC machine aircraft-grade aluminium this is the finest and most precise portable pocket hole jig. This jig allows you to produce incredibly strong, precise and clean joints when making kitchen cabinets, wardrobes, book cases and other furniture. This portable pocket hole kit comes complete with the aircraft-grade aluminium jig, titanium coated stepped drill bit, depth collar, square driver bit, screws and plugs.

Only [39.99]
 
BUY NOW >
 
 
 
 
 


TCT Router Bit Set - 7 Piece - Slot - 1/2" Shank

This 7 piece slot cutting TCT router bit set features a three wing design allowing for more cuts per second producing a smoother, better quality finish than two wings. This design means you get accurate results first time, requiring you to make fewer passes on your workpiece, saving you valuable time during your joining work. Commonly used with the 3.97mm blade for biscuit jointing these bits are also ideal for creating grooves, rabbets and slots for T-moulding.

Only [59.99]
 
BUY NOW >
 
 
 
 
 



Premium Aluminium Mini Pocket Hole Jig

This is a premium performance pocket hole jig made from CNC aircraft-grade aluminium which will allow you to produce incredibly strong, precise and clean joints when making kitchen cabinets, wardrobes, book cases and other furniture. Comes complete with the aircraft-grade aluminium jig, titanium coated stepped drill bit, depth collar, and square driver bit.

Only [24.99]
 
BUY NOW >
 
 
 
 
 


TCT Router Bit Set - 30 Piece - Multi Profile - 1/2" Shank

This 30 piece multi profile TCT router bit set provides you with one of the most comprehensive collections of 1/2" shank router bits available. Take on any joining or profiling task with complete confidence and ease with this functional and decorative set, carefully selected to offer the woodworker a choice of bit for all applications. Featuring 4 straight cutting bits, 2 dovetail bits, a selection of classical, ogee, ovolo and more, each cutter profile is clearly detailed in the wooden presentation box.

Only [89.99]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit - Reversible Rail & Stile

These reversible rail and stile TCT router bits are the most economical way of producing quality rail and stile joints when creating frames for raised panel doors and cabinets. The slot cutter, profile cutter and bearing can be assembled on the shaft in two different arrangements in order to cut both the rail and stile profile, with a standard sized 6.35mm groove for fitting raised panel edges. D=41.3mm H=23.8mm R=2.38mm P=6.35mm S=1/2".

Only [49.99]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit Set - 4 Piece - Round Nose - 1/2" Shank

This 4 piece round nose TCT router bit set is an excellent solution for producing round bottomed grooves in material for both decorative and practical purposes, such as draining grooves. These versatile bits are also popular for lettering, veining and fluting, creating soft elegant embellishments on both furniture and architecture, for example doors or drawer fronts. Included in this set are bits with a radius of 12.7mm 15.9mm, 19.1mm and 25.4mm.

Only [59.99]
 
BUY NOW >
 
 
 
 
 


Double T Track - 19mm and 8.3mm x 1000mm - Pack of 2

This is our best selling T track for woodworkers making their own router tables as it consists of two tracks in one. One slot in the track has a 19mm wide x 9.5mm deep slot opening for use with industry standard mitre gauge bars and a lower 24mm wide T slot for use with industry standard slider T bars. The other slot opening has 8.3mm wide x 9.7mm deep slot opening with a lower 13.8mm wide T slot for use with industry standard T bolts and T slot nuts, commonly used on feather boards. The external dimensions are 47mm wide by 13.1mm deep.

Only [39.99]
 
BUY NOW >
 
 
 
 
 



Precision 100 Woodturning Chuck Kit - 1" x 8tpi

The new Precision 100 Woodturning Chuck is the latest advancement in work holding systems for discerning woodturners and comes with a 10 year warranty. Precision engineered and beautifully balanced, it offers superior performance combined with rock-solid holding power and excellent load bearing capability. The chuck is specifically designed so the jaws cut into the wood to provide a class leading clamping force.

Only [129.99]
 
BUY NOW >
 
 
 
 
 


TCT Router Bit Set - 3 Piece - Bull Nose - 1/2" Shank

This 3 piece bull nose TCT router bit set offers a versatile choice of bits producing both a fully rounded edge on your material or a rounded edge with a beading as the cutting edge extends above and below the radius. These bits are most commonly used for stair tread profiles, table and counter edges, and windowsills. These multipurpose bits can also be used to create dowels by turning the material around and cutting the bull nose on the opposing side. Included in the set are bits with radii of 4.76mm, 9.53mm and 15.9mm.

Only [79.99]
 
BUY NOW >