Christmas Gifts - Hand Tools
Christmas Gifts
Hand Tools
Perfect Christmas gifts for
the discerning woodworker
 
 
 


Premium Wood Carving Knives - Set of 5

This set of five premium wood carving knives is ideal for both beginners and intermediate woodcarvers and are an important part of any carver's tool collection, carving knives can be used in tandem with chisels and gouges for roughing out and fine detailing work or on their own for whittling and chip carving. Each blade is made from a premium quality, hand forged chrome vanadium steel and has been hardened to Rc61 along its entire length, resulting in a blade that will hold and retain a sharp, fine edge, over the life of the tool, without becoming brittle when sharpened.

Only [39.99]
 
BUY NOW >
 
 
 
 
 



No 9 1/2 Standard Angle Block Plane

Made exclusively for Rutlands® by Luban, a world leader in hand plane manufacturing, these planes are a serious alternative to the premium brands that are produced in North America. The renowned design has a screw mechanism that easily allows the blade to be varied in depth relative to the sole to change the depth of cut. A block plane is small enough to be used in one hand and is designed for cutting end grain and making trimming or fine adjustment cuts. This block plane has a modified body casting to make it more responsive in use and a finer pitch blade adjustment thread for improved blade setting accuracy.

Only [79.99]
 
BUY NOW >
 
 
 
 
 



Extra Wide Clamp Cutting Guide - 1250mm

This clamp cutting guide is perfect for accurately cutting straight lines when using routers, saws or jigsaws. The guide can be clamped onto the workpiece with one hand and is guaranteed to be straight - no more using clamps and a straight edge to guide your power tool. Because the guide is clamped from below the workpiece there will be no obstructions above, and the high clamping strength means that the clamp will not move during use. There are three increasing clamping pressures which allows you to make small adjustments before firmly locking the clamp to your workpiece.

Only [49.99]
 
BUY NOW >
 
 
 
 
 




Face Clamp - 75mm - Pack of 4

These face clamps feature a fast jaw clamping mechanism which allows them to be applied one handed within seconds with minimal adjustment being needed to alter the clamping capacity. The clamps are perfect for pocket hole joinery due to their large clamp faces which allow you to clamp over joint lines to ensure perfectly flush seams on your work pieces.

Only [59.99]
 
BUY NOW >
 
 
 
 
 


Premium Hand, Tenon and Toolbox Saws - Set of 3

This is our most popular set of saws and features a 500mm handsaw, 300mm tenon saw and a 380mm toolbox saw. The teeth on these hand saws are triple, diamond ground and will cut on both the pull and push stroke, making for an extremely fast cut. Each tooth is impulse hardened for a durable and long working life and are razor sharp to leave a super fine finish in hardwood, softwood, composite board and plastic. The tooth geometry allows for both ripping and cross cutting and swarf is quickly cleared from the teeth making them function in dry and wet woods without clogging. The blades are made from 1.0mm thick steel which is Teflon coated to ensure low friction for a smooth controlled cut.

Only [39.99]
 
BUY NOW >
 
 
 
 
 



Premium Wood Carving Tools - Set of 6

Made in Germany, the blades on these carving tools are made from a premium quality, hand forged chrome vanadium tool steel, which has high resistance to metal fatigue and will last a lifetime if given normal care when relief or round carving. This 6 piece set was developed in consultation with professional carvers for both relief and round carving and is ideal for both beginners and intermediate wood carvers. The set is beautifully presented in a canvas roll with each carving tool having its own location to prevent movement and to protect the blades.

Only [69.99]
 
BUY NOW >
 
 
 
 
 



Premium Wood Carving Tools - Set of 12

Made in Germany, the blades on these carving tools are made from a premium quality, hand forged chrome vanadium tool steel, which has high resistance to metal fatigue and will last a lifetime if given normal care when relief or round carving. This 12 piece set was developed in consultation with professional carvers for both relief and round carving and is ideal for both beginners and intermediate wood carvers. The set is beautifully presented in a canvas roll with each carving tool having its own location to prevent movement and to protect the blades.

Only [99.99]
 
BUY NOW >
 
 
 
 
 




Premium Cranked Neck Paring Chisels - Set of 3

Made in Germany, these crank neck paring chisels work in areas that regular chisels cannot and are ideal for flush trimming joints, glue lines and plugs and cleaning up inside corners, dovetails and dadoes. Their off-set design allows you to register the face of the blade on the work for maximum control, preventing the blade from digging in when flush cutting.

Only [149.99]
 
BUY NOW >
 
 
 
 
 


Premium Tool Roll

This premium tool roll is made from a 3mm thick, extremely durable, yet supple leather with a suede like texture on both faces. The seams are sewn with heavy nylon thread and all critical connections have two rows of stitching for additional reinforcement. Each pocket features a series of chrome plated rivets for optimium stress distribution and have smooth surfaces on both sides to prevent damage to chisel handles and blades.

Only [29.99]
 
BUY NOW >
 
 
 
 
 



Premium Skew Chisels Left and Right - Set of 2

Made in Germany, this set of right and left hand chisels with their 45° skew will leave a clean cut when trimming shoulders, dressing end grain or tidying inside corners. The blades are made from a premium quality chrome vanadium tool steel, which has high resistance to metal fatigue, to allow for use with a mallet or free hand. Each blade is hardened to Rc61 along its entire length, resulting in a blade that will hold and retain a sharp, fine edge, over the life of the tool, without becoming brittle when sharpened.

Only [39.99]
 
BUY NOW >
 
 
 
 
 



Premium Firmer Gouges - Set of 6

Made in Germany, these premium firmer gouges are used for cutting flutes, grooves and for sculpting. With the bevel being on the outside of the tool, they are commonly recognised as out-cannel gouges and are used either free hand or with a mallet. The blades are made from a premium quality chrome vanadium tool steel, which has high resistance to metal fatigue, to withstand the demands of repeated blows from a mallet.

Only [169.99]
 
BUY NOW >
 
 
 
 
 




Premium Butt Chisels - Set of 5

Made in Germany, these butt chisels are superbly balanced with the centre of gravity at the point where the blade enters the handle. Featuring a shorter blade and handle length than conventional chisels, these butt chisels are favoured for their ease of control and blade strength. They are used, as their name suggests, for cutting out recesses when installing butt hinges and for fine detail chiselling when cutting dovetails & cleaning delicate joints.

Only [189.99]
 
BUY NOW >
 
 
 
 
 



Premium Bevel Edge Chisels - Set of 11

Made in Germany, the blades on these bevel edge chisels are made from a premium quality chrome vanadium tool steel, which has high resistance to metal fatigue, to withstand the demands of chopping. Each blade is hardened to Rc61 along its entire length, resulting in a blade that will hold and retain a sharp, fine edge, over the life of the tool, without becoming brittle when sharpened. The side bevels are finely ground to a narrow, tapered land for cleaning into angled corners and tight recesses. The blade and tang are forged from one piece of steel, which is seated deeply into the chisel handle for strength and durability.

Only [219.99]
 
BUY NOW >
 
 
 
 
 



Premium Bevel Edge Chisels
- Set of 6

Made in Germany this 6 piece set is beautifully presented in a fitted, solid beech box and comprises of 6, 10, 12, 16, 20 and 25mm bevel edge chisels, with each chisel having its own location to prevent movement of the chisels. The chisels range in overall length from 250mm to 300mm. These premium bevel edge chisels are built to withstand hard use when chopping out mortice lock and hinges, yet are extremely well balanced for fine work in the workshop when cutting dovetails and cleaning delicate joints.

Only [129.99]
 
BUY NOW >
 
 
 
 
 



Utility Butt Chisels - Set of 6

This utility, bevel edge butt chisel set is made to our specification and features six chisels housed in a fitted wooden box. The chisels are made from a high carbon steel which has been hardened and tempered to Rc60 over the full length of the blade. This results in a blade that will hold a fine edge, over a long time and withstand the impact of heavy chopping cuts without chipping. The side bevels are finely ground to a narrow, tapered land for cleaning into angled corners and tight recesses.

Only [49.99]
 
BUY NOW >
 
 
 
 
 



Utility Bevel Edge Chisels
- Set of 8

These utility bevel edge chisels are made from a high carbon steel which has been hardened and tempered to Rc60 over the full length of the blade. This results in a blade that will hold a fine edge, over a long time and withstand the impact of heavy chopping cuts without chipping. The side bevels are finely ground to a narrow, tapered land for cleaning into angled corners and tight recesses. The blade and tang are forged from one piece of steel, which is seated deeply into the chisel handle for strength and durability.

Only [49.99]
 
BUY NOW >
 
 
 
 
 



Japanese Chisels Oire Nomi - Set of 6

These Japanese Oire Nomi chisels are made by a master blacksmith in Miki City, Japan exclusively for Rutlands®. The chisels feature double-layered, ultra sharp blades with outstanding edge life. A soft iron body is forge welded to a thinner layer of extremely hard, Rc 62, white paper steel that forms the cutting edge. The backs of the blades are hollow ground to reduce the contact surface, reducing friction and lowering the necessary cutting force. The angle of the blade to the tang increases the cutting depth to almost twice the blade length.

Only [249.99]
 
BUY NOW >
 
 
 
 
 


Japanese Chisels Oire Nomi - Set of 3

These Japanese Oire Nomi chisels are made by a master blacksmith in Miki City, Japan exclusively for Rutlands®. The chisels feature double-layered, ultra sharp blades with outstanding edge life. A soft iron body is forge welded to a thinner layer of extremely hard, Rc 62, white paper steel that forms the cutting edge. This double-layer prevents brittle fractures, unlike single layer Western chisels, that become brittle when hardened to extreme temperatures. The backs of the blades are hollow ground to reduce the contact surface, reducing friction and lowering the necessary cutting force. The angle of the blade to the tang increases the cutting depth to almost twice the blade length.

Only [129.99]
 
BUY NOW >
 
 
 
 
 



Japanese Chisels Tataki Nomi - Set of 10

Made by a Japanese master blacksmith, exclusively for Rutlands®, these Japanese Tataki Nomi chisels feature double-layered, ultra sharp blades with outstanding edge life. A soft iron body is forge welded to a thinner layer of extremely hard, Rc 62-63, carbon tool steel. This double-layer prevents brittle fractures, unlike single layer Western chisels, that become brittle when hardened to extreme temperatures. The backs of the blades are hollow ground to reduce the contact surface, reducing friction and lowering the necessary cutting force. The angle of the blade to the tang increases the cutting depth to almost twice the blade length.

Only [249.99]
 
BUY NOW >
 
 
 
 
 



Japanese Chisels Tataki Nomi - Set of 6

Made by a Japanese master blacksmith, exclusively for Rutlands®, these Japanese Tataki Nomi chisels feature double-layered, ultra sharp blades with outstanding edge life. A soft iron body is forge welded to a thinner layer of extremely hard, Rc 62-63, carbon tool steel. This double-layer prevents brittle fractures, unlike single layer Western chisels, that become brittle when hardened to extreme temperatures. The backs of the blades are hollow ground to reduce the contact surface, reducing friction and lowering the necessary cutting force. The angle of the blade to the tang increases the cutting depth to almost twice the blade length.

Only [149.99]
 
BUY NOW >
 
 
 
 
 



Premium LED Magnetic Work Light

This powerful 5W LED magnetic work light provides focused lighting directly where you need it all around the workshop. The light itself features a strong magnetic base and is supplied with 3 auxiliary bases allowing it to be placed virtually anywhere in the workshop. The auxiliary bases are a steel C clamp that can be used on benches or table tops up to 60mm thick, a base that can be placed inside a workbench dog hole and a base that is supplied with a woodscrew that can be screwed into position on any wooden surface. The high strength magnetic base of the light can also be attached to any ferrous surface within the workshop.

Only [59.99]
 
BUY NOW >
 
 
 
 
 



Digital Tape Measure

This 5 metre digital tape measure is the latest advancement in measuring technology, making measuring easier, faster and more precise. A large easy to read LCD display can be set to metric or imperial readings and you can store up to two readings at the touch of a button eliminating the need to write down or remember the figure. These readings are easily recalled by holding down either the left or right buttons on the face of the tape, depending on which was used to store the reading. Extremely precise, the digital read out has a resolution of 1mm, the measuring scale is accurate to ±0.1mm, making it ideal for cabinetmakers and joiners who require accuracy each and every time.

Only [29.99]
 
BUY NOW >
 
 
 
 
 



Digital Angle Rule, Level Box and Height Gauge - Set of 3

This comprehensive set of 3 digital measuring tools will take the guesswork out of setting up your power tools or machinery, providing precision measurements on a clear digital display. The digital angle rule is perfect for laying out, angle measurement and machine or power tool setup. The digital level box is the ideal tool for the accurate set up of table saw blades, jointer fences and bandsaw or drill press tables. The digital height and depth gauge has been specifically designed for woodworkers to allow you to set saw blade and router bit heights, as well as measure mortice or slot depths, with exact precision.

Only [69.99]
 
BUY NOW >
 
 
 
 
 



Precision T Rule, Bend Rule, Rule & Protractor - Set of 4

This precision rule set contains a 300mm straight rule, a 300mm T rule, a 180mm bend rule, protractor, four 0.5mm pencils and 48 refills. The rules have been laser cut from stainless steel making them incredibly accurate and they will not rust or degrade because of the durable nature of the stainless steel. The crisp and clear precision etched graduations are very easy to read so you will not strain your eyes. The precision measurements available with these rules are unobtainable with traditional rules, this will transform the way you work.

Only [99.99]
 
BUY NOW >
 
 
 
 
 



Precision Aluminium Marking and Measuring Tools - Set of 4

Our most popular set of marking and measuring tools containing a 160mm T square rule, a triangle square, a centre finder and a 45° and 90° marking square. The tools have been CNC machined from aircraft grade aluminium and have a black anodised finish which will protect them against scratches and make them durable. A crisp and clear metric scale has been laser etched onto the tools. The scales are highly precise and have been assured to +/- 0.001mm over 1m.

Only [79.99]
 
BUY NOW >
 
 
 
 
 



No 92 Shoulder Plane

Made exclusively for Rutlands® by Luban, a world leader in hand plane manufacturing, these planes are a serious alternative to the premium brands that are produced in North America. The shoulder planes use the classic Edward Preston design but have an adjustable mouth which closes for very fine shavings with minimal tearout and opens for coarse material. This medium sized shoulder plane is ideal for trimming tenon shoulders and for precise rebate work. It can be used on endgrain and is equally adept for paring cross grain.

Only [129.99]
 
BUY NOW >
 
 
 
 
 



No 4 Smoothing Plane

Made exclusively for Rutlands® by Luban, a world leader in hand plane manufacturing, these planes are a serious alternative to the premium brands that are produced in North America. The planes use the reliable bedrock design that gives maximum stability and support for the cutting iron during use as the frog extends all the way to the sole to provide support at its cutting edge. A smoothing plane is designed for general smoothing, finishing and trimming work. With a shorter sole, it can effortlessly create a smooth surface by following any slight contours in the workpiece and reaching parts a larger plane may have missed.

Only [179.99]
 
BUY NOW >
 
 
 
 
 



Japanese Saws - Flush Cut
- Set of 2 with Roll

This set features the two most popular Japanese flush cutting saws, Kataba (R1010) and Ryoba (R1009) complete with a traditional Japanese saw roll for storage and protection. Made exclusively for Rutlands® by Gyokucho, the world's leading Japanese saw manufacturer, these saws have one stand out difference from their western counterparts; they cut on the pull stroke rather than the push stroke. The action of pulling the saw keeps the blade in tension through the cut, which allows the blade to be thinner and lighter, for a much smoother and faster cut.

Only [49.99]
 
BUY NOW >
 
 
 
 
 



Japanese Saws - 180mm - Rattan - Set of 3 with Roll

This set features the three most popular rattan handle Japanese saws, Dozuki (R1002), Kataba (R1005) and Ryoba (R1008) complete with a traditional Japanese saw roll for storage and protection. Made exclusively for Rutlands® by Gyokucho, the world's leading Japanese saw manufacturer, these saws have one stand out difference from their western counterparts; they cut on the pull stroke rather than the push stroke. The action of pulling the saw keeps the blade in tension through the cut, which allows the blade to be thinner and lighter, for a much smoother and faster cut.

Only [99.99]
 
BUY NOW >
 
 
 
 
 


Japanese Saws - 240mm - Power Grip - Set of 3 with Roll

This set features the three most popular power grip handle Japanese saws, Dozuki (R1001), Kataba (R1004) and Ryoba (R1007) complete with a traditional Japanese saw roll. Made exclusively for Rutlands® by Gyokucho, the world's leading Japanese saw manufacturer, these saws have one stand out difference from their western counterparts; they cut on the pull stroke rather than the push stroke. The action of pulling the saw keeps the blade in tension through the cut, allowing the blade to be thinner and lighter, for a much smoother and faster cut. Each blade is mounted on a handle made from TPE which is very robust and resilient material and features a hatched grip that is both slip-proof and extremely comfortable to hold.

Only [109.99]
 
BUY NOW >
 
 
 
 
 



Japanese Saws - 240mm - Rattan - Set of 3 with Roll

This set features the three most popular rattan handle Japanese saws, Dozuki (R1000), Kataba (R1003) and Ryoba (R1006) complete with a traditional Japanese saw roll for storage and protection. Made exclusively for Rutlands® by Gyokucho, the world's leading Japanese saw manufacturer, these saws have one stand out difference from their western counterparts; they cut on the pull stroke rather than the push stroke. The action of pulling the saw keeps the blade in tension through the cut, which allows the blade to be thinner and lighter, for a much smoother and faster cut.

Only [109.99]
 
BUY NOW >
 
 
 
 
 


Premium Japanese Water Stone Kit - Cabinetmaker

This sharpening kit is favoured by cabinetmakers for the precise shaping and sharpening of fine edge woodworking tools, such as plane blades, chisels, carving tools and for knives and scissors. The set comprises of an extra large, double sided 1000/6000 grit Japanese water stone (R7508), honing guide sled (R7515), knife sharpening guide (R7513) and a diamond flattening stone (R7511). The 1000 grit stone is the fastest cutting stone and is used to remove nicks before sharpening and to shape and establish a basic edge and the 6000 grit water stone is for removing burrs, polishing and honing.

Only [119.99]
 
BUY NOW >
 
 
 
 
 



Premium Japanese Water Stone Kit - Home and Workshop

This is our most popular sharpening kit, designed for reshaping and adding razor sharp edges to knives, scissors, chisels and general hand tools. The set comprises of a double sided 1000/4000 grit Japanese water stone (R7504), knife sharpening guide (R7513), honing guide (R7520) and a diamond flattening stone (R7511). The 1000 grit stone is the fastest cutting stone and is used to remove nicks before sharpening and to shape and establish a basic edge and the 4000 grit water stone is for removing burrs, polishing and honing.

Only [59.99]
 
BUY NOW >
 
 
 
 
 



Premium 180mm Multi-Profile Japanese Water Stone - Set of 3

These premium multi-profile Japanese water stones are designed for sharpening wood carving chisels, gouges and other fine tools with profiled blades. The stones feature both convex and concave radii profiles for in-cannel and out-cannel sharpening of gouges and V tools. The rear of the stone is flat to allow for the sharpening of straight edge tools such as skew and bevel edge chisels. This set consist of 1000, 2000 and 3000 grit profiled water stones.

Only [49.99]
 
BUY NOW >
 
 
 
 
 



Premium Diamond Knife & Scissor Sharpener

This premium diamond knife and scissor sharpener is incredibly easy to use and will put a razor sharp edge back on dull or blunt kitchen knives, outdoor knives and scissors. For knife sharpening you use the three top slots, each of which features a different grade of abrasive. The coarse 360 grit diamond is used to remove nicks and to establish a basic edge, the medium 600 grit diamond removes burr and adds a razor sharp edge and the fine 1000 grit ceramic hones and creates a mirror finish.

Only [19.99]
 
BUY NOW >
 
 
 
 
 


Premium 200mm Japanese Combination Water Stone - Set of 2

These are the largest water stones that we offer measuring 200mm in length by 80mm in width and 30mm in depth. The large surface area aids the sharpening performance, allows for the sharpening of wide plane blades and offers extra support for honing guides when sharpening chisels and knives. The 1000 grit water stone is the fastest cutting stone, used to remove nicks before sharpening and to shape and establish a basic edge. The 2000 grit is used to refine the edge and sharpen blunt edges, the 6000 grit removes burr, hones and add a razor sharp edge and the 10,000 is an ultra fine grain stone for final polishing and adding a mirror finish.

Only [79.99]
 
BUY NOW >
 
 
 
 
 



Premium 180mm Japanese Combination Water Stone - Set of 3

These premium Japanese combination water stones are man-made from Corundum, a synthetic aluminium oxide abrasive, set in a resin bond. This set consists of three combination stones with six different water stone grits. The 1000 grit water stone is the fastest cutting stone and is used to remove nicks before sharpening and to shape and establish a basic edge. The 2000 grit is used to refine the edge and sharpen blunt edges and the 3000 and 4000 grit are used for removing burrs, sharpening and honing. The 6000 grit will hone and add a razor sharp edge and the 10,000 is an ultra fine grain stone for final polishing and adding a mirror finish.

Only [79.99]
 
BUY NOW >
 
 
 
 
 



Premium Joiners Workbench

Manufactured from solid, kiln dried German beech, this cabinetmaker's workbench is perfectly sized for the craftsman or home woodworker. The top is a generously sized 1500mm long x 650mm deep, including the vices (1350mm x 500mm excluding the vices), and this entire area is criss-crossed with a network of 19mm dog holes. This top is 30mm thick and made up from sections of solid beech laminated together to produce a flat, warp resistant table top with a 90mm laminated beech surround. At the front and side of the top, two 360mm wide vices offer clamping capacities of 125mm and both vices run on precision machined, steel Acme screw threads.

Only [449.99]
 
BUY NOW >
 
 
 
 
 



Bench and Track Hold Down Clamps - 75mm - Pack of 4

These bench and track hold down clamps feature a fast jaw clamping mechanism which allows them to be applied one handed within seconds with minimal adjustment being needed to alter their clamping capacity. Each clamp can be mounted onto a work bench using the supplied bench clamp plate or it can fit into 8.3mm T Tracks to allow a hold down clamp which slides across your work surface. Each clamp rotates a full 360° using a bolt as a pivot creating a fixed or mobile clamping workstation.

Only [69.99]
 
BUY NOW >
 
 
 
 
 



Mitre Angle Clamp - 100mm

Not to be confused with light weight aluminium mitre clamps this clamp is made from solid grey iron castings, a material noted for its wear resistance with a high compression strength. You are guaranteed a perfect mitre every time as the thick 30mm high cast walls will not deflect under heavy load. The internal face of the castings are CNC machined to ensure that the workpiece sits true both horizontally and vertically allowing for perfect mitre joints every time. They have a clamping force up to 6000N for assured workholding. The main screws are made from hardened and tempered steel and feature a rolled acme thread for a smooth, responsive adjustment.

Only [39.99]
 
BUY NOW >
 
 
 
 
 



Workshop Multi Purpose Vice - 125mm

Weighing over 17kg this substantial vice has significant mass to absorb vibration when sawing, drilling, grinding or filing. Manufactured from CNC machined, grey iron castings it features an Acme threaded main screw, for smooth, controlled movement whilst delivering a massive and class leading clamping force up to 25000N. Both the head of the vice and the swivel base rotate through 360° and are locked off using two steel tommy bars, allowing for the workpiece to be clamped horizontally, vertically or an any angle required for best access.

Only [119.99]
 
BUY NOW >
 
 
 
 
 



Woodworking Quick Release Vice - 230mm

This quick release vice is cast, machined and assembled by the world's leading and largest vice manufacturer, who have been established since 1950. Precision CNC machined from solid grey iron castings, the vice has a class leading clamping force of 19000N for assured workholding. The 230mm wide front jaw is fractionally tapered toward the rear jaw, so that when under clamping pressure the jaws become parallel for positive non slip clamping.

Only [109.99]
 
BUY NOW >
 
 
 
 
 



Clamping Squares - 200mm x 200mm - Pack of 10

These 200mm x 200mm assembly squares are ideally sized for large to medium sized work such as kitchen and cabinet construction, window and door frame assembly and general joinery work. They keep projects square during clamping and gluing and are extremely useful when assembling furniture and cabinets. Computer designed and manufactured for accuracy, these squares are made from a high impact polycarbonate, which gives them impressive strength, and they are accurate to +/- 0.05 of a degree.

Only [39.99]
 
BUY NOW >
 
 
 
 
 


Malleable Cast Iron F Clamps - 600mm x 80mm - Pack of 10

The jaws of these clamps are made from malleable cast iron, meaning they have high tensile strength and can flex without breaking while still exerting the clamping force required. The large clamping force can be exerted without damaging your workpiece and no-mar pads are included for added protection. The bar has serrated edges on 6 faces to maximise contact with the sliding jaw to prevent it from slipping. The fast action acme thread is precision machined to enable smooth, fast clamping when needed. The traditional wooden handle has been designed to enable extra grip and prevent your hand slipping when tightening. The bar is fully galvanized, and the jaws are epoxy powder coated to prevent corrosion and increase the working life of the clamp.

Only [79.99]
 
BUY NOW >
 
 
 
 
 



Aluminium Sash Clamps with Feet - 1200mm - Pack of 4

These aluminium sash clamps with supporting feet are an upgrade on the traditional aluminium sash clamps while still maintaining the original's features and benefits. The upgrade being the addition of cast iron feet at both ends of the clamps. The feet allow the clamps to stand freely and securely on your work surface. This means your workpiece can be clamped during glue ups without the risk of the clamps ever falling over. Constructed from a sturdy flat aluminium beam with large surface area cast iron heads and tails, they can exert high pressure without deforming and are also tapered towards each other to enable true parallel clamping.

Only [99.99]
 
BUY NOW >
 
 
 
 
 



Steel Sash Clamps - 1500mm - Pack of 6

Steel sash bar clamps are needed to clamp large scale projects where a considerable clamping force is required such as cabinets, doors, worktops and panels. These sash bar clamps are extremely powerful and enable the full clamping force of 19000N to be exerted onto your project without the bar bowing or twisting. The clamping head and slide are made from grey cast iron and are guaranteed not to break during use. Being flat bottomed allows the clamp to stand, unsupported on the work bench to facilitate clamping of flat panels with ease.

Only [139.99]
 
BUY NOW >
 
 
 
 
 



T Bar Clamps - 1200mm - Pack of 4

T Bar clamps are the strongest clamps available and will not twist or warp under any amount of load. These clamps are constructed from a thick T cross section made of high quality cold drawn steel. Cold drawn steel has greater tensile strength than standard hot rolled steel making these clamps capable of heavy duty, high pressure clamping, comfortably exerting up to 19000N of pressure on the workpiece. The clamping head and slide are made from grey cast iron and are guaranteed not to break during use. Both the slide and head feature flat bottoms for unsupported clamping and drilled feet for more permanent bench mounting.

Only [159.99]
 
BUY NOW >
 
 
 
 
 



Premium Chrome Vanadium Screwdriver Set - 52 Piece

This set comprises of 52 premium quality screwdrivers and screwdriver bits. The blades are made from chrome vanadium alloy steel which has been hardened and tempered, making them particularly resistant to twisting during high torque screwdriving. The tips of these screwdrivers are machined to offer a better interface with the screw head, in turn preventing the blade from slipping. If you have ever had the screwdriver slip and damage the screw head, you will appreciate the superior grip these screwdrivers offer.

Only [34.99]
 
BUY NOW >