Top Gifts £50 or More
Top Gifts
£50 or More
Premium tools for
premium woodworkers
 
 
 
 




18v Brushless Cordless 1/4" Router with 1 x 4.0Ah Li-ion Battery

This 18v brushless cordless router provides the power of a corded router with the convenience of a cordless tool. Having no power cables to contend with and without the need for an electricity supply, you can route with greater freedom and confidence. The long lasting 4Ah Li-ion 18v battery delivers high levels of torque allowing you to route hardwood, softwood and composite wood including MDF, plywood and chipboard, just as you would with a corded router.

Only [159.99]
 
BUY NOW >
 
 
 
 
 



Premium Biscuit Jointer

Biscuit joints are predominantly used when joining sheet boards such as plywood, particle board and MDF. This premium performance jointer features a cast aluminium adjustable fence that can be set between 0° and 90° for joining straight and mitred pieces, and the fence height can be accurately adjusted to match the thickness of wood. The spring loaded plunge mechanism is extremely smooth and the triple turret depth stop allows for the use of No 0, No 10 and No 20 biscuits. The 100mm diameter blade has 6 tungsten carbide teeth to leave a clean, feather free slot for precise biscuit placement.

Only [99.99]
 
BUY NOW >
 
 
 
 
 



Japanese Saws - 240mm - Rattan - Set of 3 with Roll

This set features the three most popular rattan handle Japanese saws, Dozuki (R1000), Kataba (R1003) and Ryoba (R1006) complete with a traditional Japanese saw roll for storage and protection. Made exclusively for Rutlands® by Gyokucho, the world's leading Japanese saw manufacturer, these saws have one stand out difference from their western counterparts; they cut on the pull stroke rather than the push stroke. The action of pulling the saw keeps the blade in tension through the cut, which allows the blade to be thinner and lighter, for a much smoother and faster cut.

Only [109.99]
 
BUY NOW >
 
 
 
 
 




Premium Woodturning Lathe with Variable Speed

This is an exceptional woodturning lathe and is the established market leader in North America. Compared to many other bench top lathes it has greater work holding capacity allowing for 305mm bowl turning and 457mm spindle turning and has the advantage that you can extend the bed at a later stage to increase spindle turning to over 1000mm. It is powered by a high torque, induction motor which is extremely quiet in use, even at maximum speed and under full load.

Only [449.99]
 
BUY NOW >
 
 
 
 
 



Premium Headless Pinner Kit - 23g

This kit combines an exceptional headless pinner with a premium performance, compact, low noise compressor which has been specifically designed for nailing operations. It also features 10 metres of highly flexible, non marring air hose and all necessary quick connection fittings. The headless pinner features a precision machined aluminium cylinder and piston valve, which when you squeeze the trigger results in ultra-smooth and exceptionally powerful firing of the driving pin. There is virtually no kick back in the hand, leaving an inconspicuous hole that can simply be painted-over or filled with sanding dust to colour match the surrounding wood.

Only [399.99]
 
BUY NOW >
 
 
 
 
 



Wetstone Sharpener with Reversible, Variable Speed, Permanent Magnet Motor

With this premium performance sharpener and wide range of jigs, you can shape, sharpen and hone any type of edge tool to a mirror finish. It is powered by a reversible, variable speed, permanent-magnet motor, as used on the latest Tesla electric vehicles, which will maintain the ideal speed regardless of load applied. The low speed range means there is no risk that the edge becomes overheated and loses its hardness, giving you full control of the sharpening process, so that you do not remove more steel than necessary, making your tools last much longer.

Only [199.99]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit Set - 6 Piece - Door and Drawer Making - 1/2" Shank

This 6 piece raised panel door & drawer making TCT router bit set offers a complete solution to producing elegant custom cabinet and kitchen doors and drawers. This kit contains ogee rail and stile bits, an undercutting raised panel bit, drawer lock joint bit, a reversible glue joint bit and an edge moulding bit. Featuring perfectly balanced machined steel bodies for reduced vibration and smoother cuts, and micro-grain tungsten carbide tipped blades for long lasting sharpness and hardness.

Only [99.99]
 
BUY NOW >
 
 
 
 
 



Parallel Jaw Clamps - 800mm x 95mm - Pack of 4

These exceptional parallel jaw clamps are the best we have ever tested. The jaws are guaranteed parallel and will always be at a constant 90° angle with the bar during use to maintain the squareness of the object being clamped. Clamping force is equally distributed by the jaws which eliminates the crushing of timber fibres. The clamps have an anti slip system which means that no matter how much pressure is exerted, the jaws will not slip on the bar and slide backward. The 29mm wide rail is made from I section C45 hardened steel to prevent the clamp from bending or flexing under load.

Only [129.99]
 
BUY NOW >
 
 
 
 
 




HVLP Paint Sprayer - With Trolley

This high volume, low pressure (HVLP) paint sprayer allows for all popular coatings to be sprayed including stains, lacquers, varnishes, enamels, primers, acrylics and creosote. Powered by a 700 watt motor, a high volume of fluid is sprayed at a low pressure, causing up to 90% less overspray compared to a conventional spray system. The low pressure allows you to lay the paint on rather than blasting it on for a softer, easier application of the spray, meaning much more of the finish ends up on the desired surface.

Only [69.99]
 
BUY NOW >
 
 
 
 
 



Premium Bevel Edge Chisels
- Set of 6

Made in Germany this 6 piece set is beautifully presented in a fitted, solid beech box and comprises of 6, 10, 12, 16, 20 and 25mm bevel edge chisels, with each chisel having its own location to prevent movement of the chisels. The chisels range in overall length from 250mm to 300mm. These premium bevel edge chisels are built to withstand hard use when chopping out mortice lock and hinges, yet are extremely well balanced for fine work in the workshop when cutting dovetails and cleaning delicate joints.

Only [129.99]
 
BUY NOW >
 
 
 
 
 




Premium Aluminium Drill Guide

This premium aluminium angle drill guide offers ultra-smooth movement, is extremely precise and is free of play. It is a highly versatile and portable drill press that allows you to drill accurate holes anywhere and at any angle between +/- 60°. The sliding headstock is precision machined from aluminium and features two, 35mm long, linear bearings made from a hardened tool steel that allows the headstock to glide smoothly back and forth on the 300mm steel guide rods, without side movement.

Only [119.99]
 
BUY NOW >
 
 
 
 
 



Precision Aluminium Straight Rule, Triangle Square and Square
- Set of 3

This set of 3 precision measuring and marking tools contains our straight rule and squares and provides the woodworker with a comprehensive collection of premium quality, extraordinarily accurate measuring equipment. Precision CNC machined from a single piece of aircraft grade aluminium, each tool features laser etched metric graduations which are assured to ±0.001mm over 1m. This material is used for its stability and the fact that it will remain true once it has been machined, as it keeps to extremely tight tolerances.

Only [99.99]
 
BUY NOW >
 
 
 
 
 



Precision Steel Rule, T Rule & Bend Rule - Set of 3

This precision rule set contains a 300mm straight rule, a 300mm T rule, a 180mm bend rule, three 0.5mm pencils and 36 refills. The rules have been laser cut from stainless steel making them incredibly accurate and they will not rust or degrade because of the durable nature of the stainless steel. The crisp and clear precision etched graduations are very easy to read so you will not strain your eyes. The precision measurements available with these rules are unobtainable with traditional rules, this will transform the way you work.

Only [79.99]
 
BUY NOW >
 
 
 
 
 


Premium Router Table with R15 Router Lift and Motor

A comprehensive, professional quality router table package featuring the Premium Router Table, R5075 Router Lift and the R5018 Router Motor. Set into the 800 x 600mm phenolic laminated work surface is a full length extruded aluminium double T track, 19mm and 8.3mm in width. The included 90mm high fence features a high quality phenolic laminate sub-fence, providing a hard-wearing anti-friction surface. The router lift is built to an exacting standard, allowing you to tune-in the height of the router bit to a resolution of 0.025mm. The powerful premium 2400 watt (3 1/4 hp) variable speed router motor generates high levels of torque, powerful enough to tackle the toughest hardwoods and end grain.

SALE PRICE
 
[699.99]   |   Save [200.00]
 
BUY NOW >
 
 
 
 
 




Portable & Bench Mounted Oscillating Sander

This oscillating sander can be used hand held or can be inverted and bench mounted. Powered by a 650 watt high torque motor with variable speed control between 1800 and 3200rpm you can achieve super fine sanding results on curved, profiled and straight workpieces. The bobbins oscillate at a rate of 50 to 90 oscillations per minute and have a maximum sanding depth of 70mm.

Only [99.99]
 
BUY NOW >
 
 
 
 
 


Premium Airbrush Kit

Designed for professional use and made from finely crafted components, this premium airbrush kit is so straight forward to set up, use and clean that it makes it easy for beginners to learn. When connected to the compressor, the airbrush breaks the liquid into tiny droplets, a process known as atomization, to produce seamless and flawless blending from one colour to another. Airbrushing allows for a range of techniques and effects from pencil fine lines, ultra thin washes to saturated coverage to colour gradient all with precise and consistent control. You can spray any water based solutions, such as urethane, lacquer, acrylic, stain and any alcohol and solvent based finish.

Only [289.99]
 
BUY NOW >
 
 
 
 
 



Workshop Multi Purpose Vice - 125mm

Weighing over 17kg this substantial vice has significant mass to absorb vibration when sawing, drilling, grinding or filing. Manufactured from CNC machined, grey iron castings it features an Acme threaded main screw, for smooth, controlled movement whilst delivering a massive and class leading clamping force up to 25000N. Both the head of the vice and the swivel base rotate through 360° and are locked off using two steel tommy bars, allowing for the workpiece to be clamped horizontally, vertically or an any angle required for best access.

Only [99.99]
 
BUY NOW >
 
 
 
 
 



Premium Steel Triple Pocket Hole Jig

This pocket hole jig is quite exceptional, both in terms of its design and of build quality. It is the only pocket hole jig that features a triple bored drill block, which is made from machined tool-steel, that is ultra precise and abrasion resistant. Unlike conventional jigs that require threaded steel inserts to guide the drill bit, this jig does not need inserts and as such drilling is more precise. As the drilling block is made from an abrasion resistant tool-steel the three holes will not wear over time, resulting in consistent angled drilling year after year.

Only [99.99]
 
BUY NOW >
 
 
 
 
 




Belt and Disc Sander

This disc and belt sander will rapidly remove stock and leave a fine finish on hardwood, softwoods and composite woods whether working cross grain or end grain. The 18kg body of the sander is made from cast iron for structural strength and stiffness ensuring negligible levels of vibration. The high torque, induction motor maintains a constant speed under load, is extremely quiet in operation and is operated by a no volt release switch.

Only [159.99]
 
BUY NOW >
 
 
 
 
 




Premium Mortice Chisels - Set of 4

Made in Germany, these premium mortice chisels have substantial, 14mm thick blades to withstand the heavy blows required to cut deep mortices. The finely ground blades measure 170mm from tip to bolster and are fractionally relieved from tip to shoulder to reduce sidewall friction. The blades are made from a premium quality chrome vanadium tool steel, which has high resistance to metal fatigue, to withstand the constant use of a mallet when chopping out and to aid levering out waste.

Only [139.99]
 
BUY NOW >
 
 
 
 
 



Side Rebate Plane

Used for cleaning up dadoes, grooves and rabbets, this side rabbet plane is designed to be used vertically. The ambidextrous design means it can be used both left and right handed and features two independently adjustable T10 carbon steel blades. These blades feature 25° bevels. An integrated depth stop ensures that you don't over cut and the nose can be removed allowing the plane to cut right into corners.

Only [79.99]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit Set - 3 Piece - Joint Making - 1/2" Shank

This 3 piece joint making set combines the three most popular jointing bits in one collection. The drawer lock bit creates an incredibly strong joint with increased surface area for glue application. The lock mitre bit produces one of the strongest corner joints that can be created with a router, resulting in perfect fitting mitre joints that do not slide out of alignment during clamping. The reversible glue joint bit produces a strong edge glue joint. Using uniformly thick boards, align this bit with the centre of the edge of your board to create a strong jointing profile, then reverse each board to produce a perfectly matching glue joint on the opposing edge.

Only [89.99]
 
BUY NOW >
 
 
 
 
 



Oscillating Bobbin Spindle Sander

Getting the perfect finish on a curve or contour isn't always easy. Use a flat bed sander and you won't get a smooth shape. Finish by hand and it can often be long laborious work. This bobbin sander is designed to work with the curve or contour giving a flawless finish regardless of radii. This bobbin sander comes with five different diameters of bobbin and combined with the main drive spindle, offers six different sanding diameters of 13mm, 19mm, 26mm, 38mm, 51mm and 76mm. This range of diameters allows the sander to work on anything from a tight curve through to a gentle contour.

Only [159.99]
 
BUY NOW >
 
 
 
 
 




Utility Drill Guide

This utility drill guide is manufactured from ABS thermoplastic, a material commonly used for injection moulding applications where structural strength and stiffness are required. The drill guide is truly portable and offers the accuracy and control achieved with a drill press combined with the added benefit of being able to drill at any angle between -45° and 45°.

Only [59.99]
 
BUY NOW >
 
 
 
 
 



Premium Cryogenic M2 HSS Woodturning Tools - Set of 6

This premium set of Cryogenic M2 HSS turning tools features six full-size tools allowing for the professional turning of both bowl and spindle projects including candlesticks, goblets, standard lamps, pepper pots, bowls, platters and pens. These premium turning tools are made from M2 high-speed steel which has been cryogenically hardened, to ensure an extremely long service life and an edge that will last up to 5 times longer than conventionally hardened high-speed steel.

Only [189.99]
 
BUY NOW >
 
 
 
 
 




One Hand Bar Clamps - 600mm x 85mm - Pack of 4

One handed bar clamps are the perfect clamps to use when working alone or working overhead. They are ideal when you only have one hand free and need to secure your work piece. Each clamp can exert up to 1500N of force which can be transferred using just one hand. The patented pump lever mechanism is extremely easy to use and once secure is guaranteed not to slip and ruin the joints of your project. These are very high quality clamps and the finest bar clamps we have offered to date.

Only [79.99]
 
BUY NOW >
 
 
 
 
 



Precision 75 Woodturning Chuck Complete Kit

The Precision 75 Woodturning Chuck Complete Kit comes with seven jaw fitments and a jaw screw set and will allow both the novice and professional turner to complete any woodturning project. It is the latest advancement in work holding systems for discerning woodturners and comes with a 10 year warranty. Precision engineered and beautifully balanced, it offers superior performance combined with rock-solid holding power and excellent load bearing capability.

Only [169.99]
 
BUY NOW >
 
 
 
 
 




Premium K10 Carbide Mini Woodturning Tools - Set of 3

Comprising of three carbide tipped turning tools, measuring 330mm in overall length, this mini tool set is specifically designed for turning small-scale and precise projects. Extremely easy to master and control these carbide tip tools leave an incredibly smooth surface that requires minimal sanding. Unlike conventional turning tools that require a sweeping movement to ensure a smooth cut, these tools simply require you to advance or retract the tip as you move the tools across the tool rest.

Only [69.99]
 
BUY NOW >
 
 
 
 
 



230mm Precision Bandsaw

This professional bandsaw features a welded steel frame for rigidity and will easily and accurately saw hard and softwood, up to 90mm in depth. The two cast aluminium band wheels are precision machined and then balanced for concentricity. Three low-friction ball bearing blade guides sit above and below the table to prevent deflection and twisting. The cast table is precision machined and can be tilted through 45° for bevel, mitre and compound mitre sawing when using the mitre gauge. The rip fence locks at both the front and rear of the table, using one lever and when set the fence remains locked in position, even when under heavy load.

Only [239.99]
 
BUY NOW >
 
 
 
 
 



Premium 150mm Bench Grinder

This premium bench grinder has been specifically developed for sharpening tough alloys such as A2 and M2 high speed steels which are used in the manufacture of woodturning tools, chisels, knives, plane irons and carving tools. Both wheels are made from aluminium oxide, better suited than the carborundum wheels found on most bench grinders. The coarse, grey aluminium oxide wheel is 20mm wide and is fast cutting to remove nicks and to shape and establish a basic edge. The fine, white aluminium oxide wheel is 40mm wide is used to refine and add the final cutting edge.

Only [99.99]
 
BUY NOW >
 
 
 
 
 


Premium 200mm Japanese Combination Water Stone - Set of 2

These are the largest water stones that we offer measuring 200mm in length by 80mm in width and 30mm in depth. The large surface area aids the sharpening performance, allows for the sharpening of wide plane blades and offers extra support for honing guides when sharpening chisels and knives. The 1000 grit water stone is the fastest cutting stone, used to remove nicks before sharpening and to shape and establish a basic edge. The 2000 grit is used to refine the edge and sharpen blunt edges, the 6000 grit removes burr, hones and add a razor sharp edge and the 10,000 is an ultra fine grain stone for final polishing and adding a mirror finish.

Only [69.99]
 
BUY NOW >
 
 
 
 
 




Router Table with Lift & Motor

The new 2020 model of this best selling powered router table has a new high torque variable speed motor that maintains its rotational speed under load to ensure a consistent fine finish to the routed workpiece. The 1500W motor is electronically controlled and gives a speed range from 8,000 - 27,000rpm; perfect for all diameters of router cutter. Cutter height is controlled using the hand wheel at the front of the table, giving a seamless rise and fall along the full 40mm of travel.

Only [269.99]
 
BUY NOW >
 
 
 
 
 



Premium Stretch Clear Dust Hose - 102mm x 1 metre to 6 metre

This 102mm premium stretch dust hose extends from 1000mm when retracted to 6000mm when fully expanded and features a helical spring-steel wire that makes the hose extremely flexible, with a very small bending radius. Kink proof, the hose is made from a 0.7mm high-grade PVC, which is puncture, abrasion and chemical resistant. The smooth, low friction inner surface offers improved material flow and reduced turbulence to prevent dust build up and clogging when working with high dust out-put machines such as planer thicknessers, bench saws, router tables and woodturning lathes.

Only [89.99]
 
BUY NOW >
 
 
 
 
 




Premium Honing Guide Sled

This premium honing guide sled allows for fast, consistent and accurate honing of wood chisels and plane irons. Precision CNC machined from aircraft grade aluminium, the sliding carriage glides back and forth on 50 micro ball-bearings, ensuring a smooth, effortless movement with no lateral play. You can lock-off the head at your desired honing angle anywhere from 10-60° using an Allen key or as favoured by most, you can leave the head unlocked and simply copy the existing angle of the blade edge.

Only [69.99]
 
BUY NOW >
 
 
 
 
 




Premium Router Sign Making Kit

This premium router sign making kit includes everything that you need, except the router, to make beautiful signs. You can make horizontal, vertical and curved signs using either letters or numbers, or you can use a combination of both, with no limitation to the length or depth of the sign. The kit comes with six templates, four with letters (A - Z) and two with numbers (1 - 9), a phenolic router base plate with self-centering tool, 13mm solid brass guide bush and an 8.5mm TCT router bit with 1/4" shank.

Only [69.99]
 
BUY NOW >
 
 
 
 
 




Premium Electric Finish Nailer and Stapler - 18g

This premium electric nailer drives 18 gauge brads and staples, which have a high pull-out resistance, making them ideal for finishing work when fixing moulding, trim, beading and for general cabinet assembly. In operation it has a low level of recoil with minimal kick back and features a safety mechanism to prevent accidental firing. The anti jam mechanism allows for uninterrupted nailing and you can adjust the driving power to suit softwood, hardwood and composite wood.

Only [59.99]
 
BUY NOW >
 
 
 
 
 




Premium Woodturning Pen Kit

This precision pen turning kit contains everything you need to make three beautiful brass plated, hardwood pens. The kit is supplied with both a No 1 and a No 2 morse taper pen mandrel, ensuring that it will work with all major brands of wood turning lathes worldwide. In addition we have had the pen mandrel extended to accept pen blanks up to 160mm in length, so no matter what size of pen or pencil you wish to turn in the future this kit will handle it with ease.

Only [99.99]
 
BUY NOW >
 
 
 
 
 



Flip Stop Kit with T Track

This kit contains 2 pieces of 19mm x 1,000mm scale T track and a set of left and right flip stops which is all you need to construct your own fence for a router table or table saw. The T track is intended for use on home made router tables and benches and combines a T slot track with a recess for fitting the supplied self adhesive, metric measuring tape, allowing you to quickly measure distances on your fence or table without the need for a tape measure. The flip stops are manufactured from CNC machined aircraft-grade aluminium, beautifully finished in black electro-coating and designed for extremely precise and repetitive workshop measuring.

Only [69.99]
 
BUY NOW >
 
 
 
 
 




Premium Cranked Neck Paring Chisels - Set of 3

Made in Germany, these crank neck paring chisels work in areas that regular chisels cannot and are ideal for flush trimming joints, glue lines and plugs and cleaning up inside corners, dovetails and dadoes. Their off-set design allows you to register the face of the blade on the work for maximum control, preventing the blade from digging in when flush cutting.

Only [149.99]
 
BUY NOW >
 
 
 
 
 



Premium TCT Countersink Drill Bits with Low Friction Depth Stops - Set of 5

This set of 5 tungsten carbide tipped countersink drill bits with low friction depth stops and M2 high speed steel brad point pilot bits are truly the best we have ever offered or tested. You can adjust the brad point bit to change the depth of the pilot hole, and you can adjust the rotating depth stop to change the depth of the countersink hole. A deeper recess is used when you want to use plugs, or you can set the depth of the recess to leave your screw flush with the surface.

SALE PRICE
 
[69.99]   |   Save [30.00]
 
BUY NOW >
 
 
 
 
 



Digital Angle Rule, Level Box and Height Gauge - Set of 3

This comprehensive set of 3 digital measuring tools will take the guesswork out of setting up your power tools or machinery, providing precision measurements on a clear digital display. The digital angle rule is perfect for laying out, angle measurement and machine or power tool setup. The digital level box is the ideal tool for the accurate set up of table saw blades, jointer fences and bandsaw or drill press tables. The digital height and depth gauge has been specifically designed for woodworkers to allow you to set saw blade and router bit heights, as well as measure mortice or slot depths, with exact precision.

Only [59.99]
 
BUY NOW >
 
 
 
 
 




Premium Butt Chisels - Set of 5

Made in Germany, these butt chisels are superbly balanced with the centre of gravity at the point where the blade enters the handle. Featuring a shorter blade and handle length than conventional chisels, these butt chisels are favoured for their ease of control and blade strength. They are used, as their name suggests, for cutting out recesses when installing butt hinges and for fine detail chiselling when cutting dovetails & cleaning delicate joints.

Only [189.99]
 
BUY NOW >
 
 
 
 
 




No 91 Shoulder Plane

This plane has been designed on the Edward Preston classic shoulder plane yet has the added feature of an adjustable toe. The adjustable toe controls the throat opening and minimise end grain tear out. The body of the plane is made from a stress relived ductile steel which is machined to a tolerance of +/- 0.001mm to ensure that the sole is both flat and square.

Only [99.99]
 
BUY NOW >
 
 
 
 
 



Japanese Chisels Oire Nomi - Set of 6

These Japanese Oire Nomi chisels are made by a master blacksmith in Miki City, Japan exclusively for Rutlands®. The chisels feature double-layered, ultra sharp blades with outstanding edge life. A soft iron body is forge welded to a thinner layer of extremely hard, Rc 62, white paper steel that forms the cutting edge. The backs of the blades are hollow ground to reduce the contact surface, reducing friction and lowering the necessary cutting force. The angle of the blade to the tang increases the cutting depth to almost twice the blade length.

Only [249.99]
 
BUY NOW >
 
 
 
 
 



Premium R15 Router Lift and Motor

A truly excellent router lift and router motor package featuring the R5075 Premium Router Lift and the R5018 Router Motor. Built with premium quality materials to an exacting standard, the lift has been meticulously engineered to ensure precise, ultra smooth raising and lowering of the router bit. The powerful premium 2400 watt (3 1/4 hp) router motor generates high levels of torque, powerful enough to tackle the toughest hardwoods and end grain. This is a highly impressive package with a premium performance motor and router lift that will make routing easier, faster and more precise.

Only [499.99]
 
BUY NOW >
 
 
 
 
 




Premium Firmer Gouges - Set of 6

Made in Germany, these premium firmer gouges are used for cutting flutes, grooves and for sculpting. With the bevel being on the outside of the tool, they are commonly recognised as out-cannel gouges and are used either free hand or with a mallet. The blades are made from a premium quality chrome vanadium tool steel, which has high resistance to metal fatigue, to withstand the demands of repeated blows from a mallet.

Only [169.99]
 
BUY NOW >
 
 
 
 
 



Precision 100 Woodturning Chuck Complete Kit

The new Precision 100 Woodturning Chuck Complete Kit is the latest advancement in work holding systems for discerning woodturners and comes with a 10 year warranty. This is our premium chuck offering and contains the Precision 100 chuck body, 70mm dovetail jaws, 75mm faceplate ring, 50mm pin jaws woodscrew chuck, 75mm ripple jaws, 45mm extended dovetail jaws, 250mm button jaws, 115mm powergrip jaws and a set of eight hardened jaw screws.

Only [199.99]
 
BUY NOW >
 
 
 
 
 



Woodworking Quick Release Vice - 230mm

This quick release vice is cast, machined and assembled by the world's leading and largest vice manufacturer, who have been established since 1950. Precision CNC machined from solid grey iron castings, the vice has a class leading clamping force of 19000N for assured workholding. The 230mm wide front jaw is fractionally tapered toward the rear jaw, so that when under clamping pressure the jaws become parallel for positive non slip clamping.

Only [99.99]
 
BUY NOW >
 
 
 
 
 


Malleable Cast Iron F Clamps - Large - 300mm x 120mm - Pack of 6

These large capacity F clamps will prove invaluable in the workshop when you need to reach areas that are inaccessible to standard clamps, they are perfect for clamping deep onto a workpiece. The jaws of these clamps are made from malleable cast iron, meaning they have high tensile strength and can flex without breaking while still exerting the clamping force required. The bar has serrated edges on 6 faces to maximise contact with the sliding jaw to prevent it from slipping. The fast action acme thread is precision machined to enable smooth, fast clamping when needed.

Only [69.99]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit Set - 66 Piece - Multi Profile - 1/2" Shank

This 66 piece multi profile TCT router bit set is the ultimate collection of professional quality bits, offering incredible value for money and giving you an enormously diverse variety of choice, giving you the flexibility to take on any task with complete confidence and ease. Containing straight cutting bits, V groove bits, dovetail bits, chamfer bits, rabbeting bits, cove bits, edge moulding bits and much more, each router bit profile is clearly detailed in the wooden presentation box.

Only [269.99]
 
BUY NOW >
 
 
 
 
 



Standard Angle Block Plane

Designed for making trimming and fine adjustment cuts, the block plane is an invaluable tool in the workshop. Made from premium quality cast steel, this block plane is fully stress relieved and precision ground to exacting tolerances to be square and flat. This block plane has a modified body casting to make it more responsive in use and a finer pitch blade adjustment thread for improved blade setting accuracy.

Only [79.99]
 
BUY NOW >
 
 
 
 
 



Precision 1/4" Router - 710W Variable Speed

Incredible power and precision in a compact body, this 1/4" router has been carefully engineered to provide a high quality and enjoyable routing experience. Open up a world of creative woodworking possibilities, whether trimming, joining, edge profiling or sign making this portable router will tackle all tasks with complete ease. Equally adept as a handheld unit or mounted in a router table, it will quickly become your go-to tool and an invaluable addition to your toolkit.

Only [89.99]
 
BUY NOW >
 
 
 
 
 



Japanese Saws - 180mm - Rattan - Set of 3 with Roll

This set features the three most popular rattan handle Japanese saws, Dozuki (R1002), Kataba (R1005) and Ryoba (R1008) complete with a traditional Japanese saw roll for storage and protection. Made exclusively for Rutlands® by Gyokucho, the world's leading Japanese saw manufacturer, these saws have one stand out difference from their western counterparts; they cut on the pull stroke rather than the push stroke. The action of pulling the saw keeps the blade in tension through the cut, which allows the blade to be thinner and lighter, for a much smoother and faster cut.

Only [99.99]
 
BUY NOW >
 
 
 
 
 



Premium Japanese Water Stone Kit - Home and Workshop

This is our most popular sharpening kit, designed for reshaping and adding razor sharp edges to knives, scissors, chisels and general hand tools. The set comprises of a double sided 1000/4000 grit Japanese water stone (R7504), knife sharpening guide (R7513), honing guide (R7520) and a diamond flattening stone (R7511). The 1000 grit stone is the fastest cutting stone and is used to remove nicks before sharpening and to shape and establish a basic edge and the 4000 grit water stone is for removing burrs, polishing and honing.

SALE PRICE
 
[49.99]   |   Save [25.00]
 
BUY NOW >
 
 
 
 
 



Premium Finish Nailer Kit - 18g

This kit combines an exceptional finish nailer with a premium performance, compact, low noise compressor which has been specifically designed for nailing operations. It also features 10 metres of highly flexible, non marring air hose and all necessary quick connection fittings. The premium 18g brad nailer is designed for furniture production and assembly, finish and decorative trim work and fine cabinet making. The premium performance, compact compressor has been specifically designed for professional use with pneumatic nailers and pinners. The 560 watt motor combined with the 4 litre high pressure tank delivers up to 160 litres of air per minute from 0 to 8 bar pressure.

Only [329.99]
 
BUY NOW >
 
 
 
 
 




Premium Aluminium Dowel Jig Kit

This jig kit has been specifically designed to make dowel jointing faster, simpler and with greater accuracy. Unlike conventional jigs that only allow for edge to edge jointing, with this jig you can create edge to surface joints, edge to corner joints and edge to edge joints and it features a 15mm drill guide for use with cam lock dowels. The main body of the jig features a series of five perfectly aligned holes to accept the drilling guide bushes of either 6, 8 or 10mm.

Only [119.99]
 
BUY NOW >
 
 
 
 
 



Precision 1/4" Router with Trimming, Offset and Tilting Bases

Incredible power and precision in a compact body, this 1/4" router has been carefully engineered to provide a high quality and enjoyable routing experience. Open up a world of creative woodworking possibilities, whether trimming, joining, edge profiling or sign making this portable router will tackle all tasks with complete ease. Equally adept as a handheld unit or mounted in a router table, it will quickly become your go-to tool and an invaluable addition to your toolkit. Included with 3 additional router bases, you now have the versatility to take on any project with complete ease.

Only [129.99]
 
BUY NOW >
 
 
 
 
 



Premium Joiners Workbench

Manufactured from solid, kiln dried German beech, this cabinetmaker's workbench is perfectly sized for the craftsman or home woodworker. The top is a generously sized 1500mm long x 650mm deep, including the vices (1350mm x 500mm excluding the vices), and this entire area is criss-crossed with a network of 19mm dog holes. This top is 30mm thick and made up from sections of solid beech laminated together to produce a flat, warp resistant table top with a 90mm laminated beech surround. At the front and side of the top, two 360mm wide vices offer clamping capacities of 125mm and both vices run on precision machined, steel Acme screw threads.

Only [399.99]
 
BUY NOW >
 
 
 
 
 



Dust Separator

The principal of this cyclone system is that dust and shavings that would normally be sucked directly into your vacuum are now collected in the cyclone's 20 litre drum. This means that you can collect dust for longer periods of time, without losing suction power caused by prematurely filling and clogging the filter on your vacuum. It also means that you save money on paper collection bags for your vacuum. The 20 litre drum is transparent so you can see when it is ready for emptying into a bin liner.

Only [89.99]
 
BUY NOW >
 
 
 
 
 



Premium Scroll Saw with Rotary Shaft

This premium scroll saw has excellent vibration dampening properties, which combined with the twin pivot arm mechanism, results in a very controllable and clean cut. The electronic variable stroke rate of 550 to 1600 strokes per minute allows you to cut intricate shapes in a wide range of materials including hard and soft woods, plastics and non-ferrous metals. The scroll saw has a quiet running and powerful motor which will comfortably cope with depth of cut up to 50mm. The heavy duty base is made from cast iron and the table is machined from aluminium and tilts through 45° for bevel and mitre cuts.

Only [169.99]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit Set - 2 Piece - Tongue & Groove - 1/2" Shank

This 2 piece tongue and groove TCT router bit set provides extremely strong glue joints over long lengths for jointing jobs such as tabletops, panel making and strip flooring. Stronger than dowels or biscuit joints, the interlocking design of the tongue creates an increased surface area for glue application. Featuring perfectly balanced machined steel bodies for reduced vibration and smoother cuts, and micro-grain tungsten carbide tipped blades for long lasting sharpness and hardness. Available in a 1/2" shank these bits are for use with a router table only.

Only [69.99]
 
BUY NOW >
 
 
 
 
 



Premium Mini Bench Grinder and Polisher with Flexi-Shaft

This premium mini bench grinder will grind, sharpen, polish and buff tools and has a flexible rotary shaft for drilling, deburring and grinding. Its dimension and scale allow for fine and detailed work to be carried out with precision and accuracy. The whisper quiet, high torque, motor has variable speed control from 3,000 to 10,000rpm for setting the correct rotational speed for the application. The bench grinder is fitted with a 75mm aluminium oxide wheel, which is fast cutting to remove nicks, shape a basic edge and sharpen and a fibre wheel for cleaning and deburring.

Only [99.99]
 
BUY NOW >
 
 
 
 
 



Japanese Chisels Tataki Nomi - Set of 10

Made by a Japanese master blacksmith, exclusively for Rutlands®, these Japanese Tataki Nomi chisels feature double-layered, ultra sharp blades with outstanding edge life. A soft iron body is forge welded to a thinner layer of extremely hard, Rc 62-63, carbon tool steel. This double-layer prevents brittle fractures, unlike single layer Western chisels, that become brittle when hardened to extreme temperatures. The backs of the blades are hollow ground to reduce the contact surface, reducing friction and lowering the necessary cutting force. The angle of the blade to the tang increases the cutting depth to almost twice the blade length.

Only [249.99]
 
BUY NOW >
 
 
 
 
 



Premium Steel Pocket Hole Jig

Pocket hole jigs allow you to produce incredibly strong, precise and clean joints when making kitchen cabinets, wardrobes, book cases and other furniture. Pocket hole joints require no glue and the joints can be easily dismantled at any time. This new pocket hole jig is in a class of its own when it comes to build quality, accuracy and ease of set up. The key features found on other leading brands of jig have been combined to create one exceptional pocket hole jig. The toggle clamp and guide bushes are manufactured from tool steel, precision CNC machined to ensure both clamping and drilling accuracy.

Only [79.99]
 
BUY NOW >
 
 
 
 
 



Premium Vacuum Cleaner with Power Tool Take Off Socket - 10L

This premium vacuum cleaner offers outstanding performance and thorough cleaning in the home and workshop. The 1200W motor has enormous suction power of 260 mbar and features variable air-flow control, to adjust the suction to suit all floor surfaces. Extremely quiet in use at just 65dB, you can conveniently switch on and off by hand or foot. The vacuum has four-fold dust filtration, comprising of a Hepa fleece filter bag, Hepa filter cartridge, Hepa filter basket and Hepa filter sponge to ensure that the air re-entering the atmosphere is clean.

Only [199.99]
 
BUY NOW >
 
 
 
 
 



Premium Bench Top Router Table with Insert Plate

This premium bench top router table provides the ultimate portable routing experience, compact in size without compromising on performance. Set into the 600 x 400mm phenolic laminated work surface is an extruded aluminium 19mm T track for accepting mitre gauges, stops, feather boards and other accessories. Included is a 298 x 235mm solid aluminium router plate, 10mm thick providing a strong mounting surface for your plunge or fixed based router. The included 65mm high fence also features a high quality phenolic laminate top, providing a hard wearing anti-friction surface to feed your workpiece along.

Only [349.99]
 
BUY NOW >
 
 
 
 
 




Premium HSS Brad Point Drill Bits - Set of 25

This set of 25 premium brad point bits are made from M2 high speed steel and are the finest wood drill bits that we have ever offered. They feature two lips on the perimeter, that finely score the circumference of the hole, prior to the chipping bevels removing the stock. This results in minimal fibre pull and tearing of the wood leaving extremely clean holes in hardwoods, softwoods and composite woods.

Only [69.99]
 
BUY NOW >
 
 
 
 
 




Precision Aluminium Straight Rule - 900mm

This is the only precision rule to have been designed with features and benefits that are specific to woodworking, it is the straightest, heaviest, and flattest rule available. Each side of the rule has a 30° bevelled edge that allows you to make your pencil mark next to your required graduation without parallax error. The rule features two scales, a standard 0 - 900mm scale and a 450 - 0 - 450mm centre scale, used to quickly find the centre of stock.

Only [129.99]
 
BUY NOW >
 
 
 
 
 



Premium Bi-Metal HSS Hole Saw Kit

These bi-metal hole saws have M42 high speed steel cutting tips bonded to a steel cup and have the added advantage of variable pitch teeth design. The teeth are alternate set from 15° to 0° with varying deep and shallow gullets and with variable pitch from 4 to 6tpi. The result of this tooth formation is that they will provide an extremely smooth cut in a wide variation of materials including hardwoods, softwoods, composite woods, plastics, concrete block and plasterboard.

Only [59.99]
 
BUY NOW >
 
 
 
 
 



Utility Dovetail Jig

This dovetail jig is designed to produce classical dovetail joints that are both beautiful and strong when making boxes, drawers and fine furniture. Extremely simple to set up and use the jig comes complete and ready to rout with a half blind template and a bearing guided dovetail router bit for producing 12mm wide half blind dovetails.The body of the jig is manufactured from a heavy gauge steel pressing to prevent distortion when under load and the template is precision CNC machined from 6mm thick aluminium to ensure precise and accurate joints every time.

Only [99.99]
 
BUY NOW >
 
 
 
 
 


Premium Mitre Gauge with Fence and Flip Stop

This is an exceptional mitre gauge, complete with a precision mitre fence and precision flip stop. It has become recognised by leading woodworkers worldwide as the go to mitre gauge for saw benches and router tables. The mitre bar is manufactured from hardened anodised aluminium, measuring 18.5mm wide x 8mm deep x 450mm long and features a series of 4 expansion discs to ensure zero side play and friction-free travel. By adjusting the expansion discs with the simple turn of an allen key the bar will give a no-play fit in table saw and router table mitre gauge channels ranging from 18.5 to 19.9mm in width. In addition, a 23.5mm removable steel disc at the end of the bar allows for a no-play fit in industry standard 19mm T track.

Only [99.99]
 
BUY NOW >
 
 
 
 
 



Premium Vacuum Cleaner with Power Tool Take Off Socket - 30L

This is a quiet and powerful wet and dry, premium vacuum cleaner with a 30 litre container volume that offers outstanding performance and thorough cleaning in the home and workshop. The vacuum has a triple dust filtration system when dry cleaning, comprising of a Hepa fleece filter bag, Hepa filter cartridge and Hepa filter sponge to ensure that the air re-entering the atmosphere is clean. The 1200W motor has enormous suction power and features variable air-flow control, to adjust the suction to suit all floor surfaces.

Only [299.99]
 
BUY NOW >
 
 
 
 
 


Aluminium Sash Clamps with Feet - 900mm - Pack of 4

These aluminium sash clamps with supporting feet are an upgrade on the traditional aluminium sash clamps while still maintaining the original's features and benefits. The upgrade being the addition of cast iron feet at both ends of the clamps. The feet allow the clamps to stand freely and securely on your work surface. This means your workpiece can be clamped during glue ups without the risk of the clamps ever falling over. Constructed from a sturdy flat aluminium beam with large surface area cast iron heads and tails that measure 50mm high x 45mm wide they can exert high pressure without deforming and are also tapered towards each other to enable true parallel clamping.

Only [79.99]
 
BUY NOW >
 
 
 
 
 



Premium K10 Carbide Woodturning Tools - Set of 3

This K10 carbide tool set consists of three individual tools with carbide tip profiles of square, round and diamond, allowing for the turning of both bowl and spindle projects including candlesticks, goblets, standard lamps, pepper pots, bowls, platters and pens. Extremely easy to master and control these carbide tip tools leave an incredibly smooth surface that requires minimal sanding. The blades are manufactured from K10 carbide, which is extremely hardwearing, retaining its edge for longer even when working with hard and exotic woods. When the blade shows signs of wear simply rotate it around to an unused section to create a fresh edge.

Only [119.99]
 
BUY NOW >
 
 
 
 
 


Japanese Saws - 240mm - Power Grip - Set of 3 with Roll

This set features the three most popular power grip handle Japanese saws, Dozuki (R1001), Kataba (R1004) and Ryoba (R1007) complete with a traditional Japanese saw roll. Made exclusively for Rutlands® by Gyokucho, the world's leading Japanese saw manufacturer, these saws have one stand out difference from their western counterparts; they cut on the pull stroke rather than the push stroke. The action of pulling the saw keeps the blade in tension through the cut, allowing the blade to be thinner and lighter, for a much smoother and faster cut. Each blade is mounted on a handle made from TPE which is very robust and resilient material and features a hatched grip that is both slip-proof and extremely comfortable to hold.

Only [109.99]
 
BUY NOW >
 
 
 
 
 



Premium Air Filtration System

This new premium air filtration system has been specifically designed to remove fine dust out of the workshop's atmosphere. It features the latest advancement in filter technology which results in 98% of airborne particles of dust being filtered down to 5 micron and 86% being filtered down to 1 micron. Air in the workshop is drawn into the unit by a high power motor, extremely quiet in operation at 50dB to 60dB, even at maximum air flow speed. The air passes through an outer electrostatic fine filter and into the latest technology of pleated micro filters.

Only [199.99]
 
BUY NOW >
 
 
 
 
 


18v Brushless Cordless 1/4" Router with 1 x 4.0Ah Li-ion Battery and Trimming, Offset & Tilting Base

This 18v brushless cordless router provides the power of a corded router with the convenience of a cordless tool and is supplied with 3 bases: a trimming base, a tilting base and an offset base. Having no power cables to contend with and without the need for an electricity supply, you can route with greater freedom and confidence. The long lasting 4Ah Li-ion 18v battery delivers high levels of torque allowing you to route hardwood, softwood and composite wood including MDF, plywood and chipboard, just as you would with a corded router. Included with 3 additional router bases, you now have the versatility to take on any project with complete ease.

Only [219.99]
 
BUY NOW >
 
 
 
 
 



Japanese Chisels Tataki Nomi - Set of 6

Made by a Japanese master blacksmith, exclusively for Rutlands®, these Japanese Tataki Nomi chisels feature double-layered, ultra sharp blades with outstanding edge life. A soft iron body is forge welded to a thinner layer of extremely hard, Rc 62-63, carbon tool steel. This double-layer prevents brittle fractures, unlike single layer Western chisels, that become brittle when hardened to extreme temperatures. The backs of the blades are hollow ground to reduce the contact surface, reducing friction and lowering the necessary cutting force. The angle of the blade to the tang increases the cutting depth to almost twice the blade length.

Only [149.99]
 
BUY NOW >
 
 
 
 
 


Premium Polyurethane Clear Dust Hose - 102mm x 3 metre

This premium dust hose is made from transparent polyurethane (PU) for superior puncture, abrasion and chemical resistance to dust hoses made from PVC. The walls are made from 0.7mm polyurethane which is approximately twice the thickness of a standard PVC dust hose, to prevent chips and sharp off-cuts from tearing or puncturing the walls of the hose. The smooth, low friction inner surface ensures excellent material flow, minimises turbulence and is abrasion proof to ensure a long life, making it perfect for use with high volume dust generating machines such as planer thicknessers, table saws, woodturning lathes and router tables.

Only [59.99]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit Set - 7 Piece - Slot - 1/2" Shank

This 7 piece slot cutting set features a three wing design allowing for more cuts per second producing a smoother, better quality finish than two wings. This versatile set features a slot cutting diameter of 50.8mm, a slot depth of 14.3mm and a selection of the following widths: 1.59mm, 2.38mm, 3.18mm, 3.97mm, 4.76mm and 6.35mm. This slot cutting set also comes complete with bearing and spacers, allowing you to arrange the cutters to create perfectly matching tongue and groove joints.

Only [69.99]
 
BUY NOW >
 
 
 
 
 


T Track and Hardware Kit - Bumper Pack

This kit contains 2 pieces of 8.3mm x 1,000mm T track, 2 pieces of 19mm x 1,000mm T track and a 60 piece hardware kit. The hardware kit will work with both the included T tracks, as it contains slider bars for 19mm T tracks and T bolts that fit both the slider bars and fit directly into the slot in 8.3mm T tracks. The set includes 4 x slider bars, 10 x 65mm T bolts with 12mm heads, 10 x 40mm T bolts with 12mm heads, 3 x 5 star knobs with through heads, 3 x 5 star knobs with male threads, 4 x round knobs with through heads, 3 x T knobs with through heads, 8 x threaded insert nuts, 8 x 3 prong T nuts, 4 x locking washers.

Only [79.99]
 
BUY NOW >
 
 
 
 
 



Premium 180mm Japanese Combination Water Stone - Set of 3

These premium Japanese combination water stones are man-made from Corundum, a synthetic aluminium oxide abrasive, set in a resin bond. This set consists of three combination stones with six different water stone grits. The 1000 grit water stone is the fastest cutting stone and is used to remove nicks before sharpening and to shape and establish a basic edge. The 2000 grit is used to refine the edge and sharpen blunt edges and the 3000 and 4000 grit are used for removing burrs, sharpening and honing. The 6000 grit will hone and add a razor sharp edge and the 10,000 is an ultra fine grain stone for final polishing and adding a mirror finish.

Only [69.99]
 
BUY NOW >
 
 
 
 
 



Bench and Track Hold Down Clamps - 75mm - Pack of 4

These bench and track hold down clamps feature a fast jaw clamping mechanism which allows them to be applied one handed within seconds with minimal adjustment being needed to alter their clamping capacity. Each clamp can be mounted onto a work bench using the supplied bench clamp plate or it can fit into 8.3mm T Tracks to allow a hold down clamp which slides across your work surface. Each clamp rotates a full 360° using a bolt as a pivot creating a fixed or mobile clamping workstation.

Only [59.99]
 
BUY NOW >
 
 
 
 
 



Premium R20 Electronic Router Lift and Motor

This premium electronic router lift and motor are the perfect addition to your workshop to upgrade your routing capabilities. Noticeably improve the accuracy and quality of your work compared to using plunge routers mounted to insert plates. This package provides pin point electronic accuracy with super fast set up and adjustment using the digital control box. Purposefully designed to seamlessly work together the combination will fit into Rutlands, Jessem or homemade router table tops providing the hole dimensions are 298 x 235mm to accept the lift plate.

SALE PRICE
 
[699.99]   |   Save [100.00]
 
BUY NOW >
 
 
 
 
 



Premium Router Sled

When routing the end grain of a narrow workpiece such as rail and stile doors it is imperative that the workpiece is held both securely and safely to achieve precise results. The coping sled features a large smooth sliding phenolic base ensuring stability and control whilst a premium quality toggle clamp holds the stock firmly against the fence, allowing rails to travel through the router bit ensuring clean and square cuts. This new sled uses the router fence as its reference, so unlike sleds that use mitre tracks, you do not have to waste time aligning the mitre slot parallel with the fence.

Only [99.99]
 
BUY NOW >
 
 
 
 
 



Ductile Cast Iron F Clamps - 150mm x 80mm - Pack of 6

These ductile cast iron F clamps are our strongest and most durable F clamps, each of these clamps produce 3000N of clamping force. The jaws are made from incredibly resilient ductile cast iron, it is the strongest iron used in clamp construction and is known for its impact, wear and stress resistance. The large clamping force can be exerted without damaging your workpiece and no-mar pads are included for added protection. The bar has serrated edges, which work with the sliding jaw to prevent it from slipping. The fast action acme thread is precision machined to enable smooth, fast clamping when needed.

Only [69.99]
 
BUY NOW >
 
 
 
 
 


Precision 1/2" Router - 2200W Variable Speed with Fine Height Adjuster

This 1/2" router has been specifically designed for both freehand use and for mounting in a router table. The router features a micro-fine height adjuster handle which allows you to adjust and precision set the cutter height with ease, when upright or inverted in a table. The powerful 2200 watt motor features variable speed control from 9000 to 22000rpm and has constant speed under load ensuring a fine finish to the workpiece on hardwoods, softwoods and composite woods. The motor has in built soft start on the slowest speed to eliminate sudden movement of the router on start up.

Only [139.99]
 
BUY NOW >
 
 
 
 
 



Workbench and Machinery Castor Set with Lift

This wheel set is purposed designed for heavy duty use on workshop machinery and workbenches. The mounting brackets and lift mechanism are manufactured from 3mm thick hardened steel plate that will not buckle or bend under heavy load. Simply mount the brackets on your workbench or machine legs at a height 40mm above the surface of the floor, by drilling the legs and using the supplied bolts. A drilling template is provided to allow for precise set up. Once mounted you press down on the lift pedal with your foot until it locks firmly in place, lifting the workbench or machine off the floor.

Only [59.99]
 
BUY NOW >
 
 
 
 
 


Premium Japanese Water Stone Kit - Cabinetmaker

This sharpening kit is favoured by cabinetmakers for the precise shaping and sharpening of fine edge woodworking tools, such as plane blades, chisels, carving tools and for knives and scissors. The set comprises of an extra large, double sided 1000/6000 grit Japanese water stone (R7508), honing guide sled (R7515), knife sharpening guide (R7513) and a diamond flattening stone (R7511). The 1000 grit stone is the fastest cutting stone and is used to remove nicks before sharpening and to shape and establish a basic edge and the 6000 grit water stone is for removing burrs, polishing and honing.

Only [139.99]
 
BUY NOW >
 
 
 
 
 




Premium Silent Compressor

This is a premium performance, compact compressor which has been specifically designed for professional use with pneumatic nailers and pinners. The 560 watt motor combined with the 4 litre high pressure tank delivers up to 160 litres of air per minute from 0 to 8 bar pressure. Once the tank has reached the pre-set pressure of 8 bar the motor automatically switches off. As air is used the pressure in the tank drops and the motor automatically restarts to ensure that the output pressure remains constant.

Only [219.99]
 
BUY NOW >
 
 
 
 
 



Premium High Filtration Dust Collector - 50L

This premium high filtration dust collector will collect and filter dust particles down to 0.5 microns, in order to minimise the amount of harmful dust re-entering the workshop. It is purposely designed for use with fine dust producing machines and power tools such as routers, sanders, circular saws, bandsaws, planers and woodturning lathes. With its three-stage filtration, dust is first filtered through a filter bag, then through a HEPA cartridge filter and finally through a fine gauze filter before the filtered air re-enters the workshop.

Only [139.99]
 
BUY NOW >
 
 
 
 
 



Low Angle Block Plane

A good low angle block plane is invaluable when working with end grain and this one is a good investment for any woodworker. The mouth is easily adjustable for the depth of cut required from deep aggressive cuts to fine translucent shavings. Produced from a single steel casting, the body of the plane is precision ground for a flat sole and square wings. With a bevel angle of 25°, the blade is bedded at an angle of 12° giving an overall cutting angle of 37°; perfect for trimming end grain without tearing.

Only [79.99]
 
BUY NOW >
 
 
 
 
 


Japanese Chisels Oire Nomi - Set of 3

These Japanese Oire Nomi chisels are made by a master blacksmith in Miki City, Japan exclusively for Rutlands®. The chisels feature double-layered, ultra sharp blades with outstanding edge life. A soft iron body is forge welded to a thinner layer of extremely hard, Rc 62, white paper steel that forms the cutting edge. This double-layer prevents brittle fractures, unlike single layer Western chisels, that become brittle when hardened to extreme temperatures. The backs of the blades are hollow ground to reduce the contact surface, reducing friction and lowering the necessary cutting force. The angle of the blade to the tang increases the cutting depth to almost twice the blade length.

Only [129.99]
 
BUY NOW >
 
 
 
 
 



Premium Tenon Plug Cutters and Forstner Bits - Set of 4 - 15, 20, 25 and 30mm

This set contains four premium plug & tenon cutters and four perfectly matching premium forstner bits in 15, 20, 25 and 30mm. Designed for use in a drill press, they will drill flawless holes and produce matching tenons and plugs in both hard and softwoods. The plug and tenon cutters are manufactured from a special grade of high carbon steel which is extremely hard wearing and retains its hardness over prolonged use, resulting in a cutter that will not deform under heat and which will always keep the same cutting geometry, over its lifetime.

Only [119.99]
 
BUY NOW >
 
 
 
 
 



Premium Bevel Edge Chisels - Set of 11

Made in Germany, the blades on these bevel edge chisels are made from a premium quality chrome vanadium tool steel, which has high resistance to metal fatigue, to withstand the demands of chopping. Each blade is hardened to Rc61 along its entire length, resulting in a blade that will hold and retain a sharp, fine edge, over the life of the tool, without becoming brittle when sharpened. The side bevels are finely ground to a narrow, tapered land for cleaning into angled corners and tight recesses. The blade and tang are forged from one piece of steel, which is seated deeply into the chisel handle for strength and durability.

Only [219.99]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit Set - 7 Piece - Straight with End Cutting - 1/2" Shank

These straight with end cutting TCT router bits feature a bottom cutting edge which allows for fast and efficient plunge cutting. These bits are popular for rabbeting, grooving, mortising and cutting dadoes. With a double flute design, they feature 2 parallel cutting edges, spreading the workload over several edges rather than just one. This results in a slower and less aggressive cutting action, providing a much cleaner overall finish. The set comprises of 10mm, 12mm, 13mm, 16mm, 18mm, 20mm and 25mm straight with end cutting bits all provided with a 1/2" shank.

Only [99.99]
 
BUY NOW >
 
 
 
 
 



Premium Dovetail Jig

This premium dovetail jig will guide you through the process of making strong, flush fitting dovetail joints with zero complication. Tackle these notoriously difficult to cut joints with complete confidence and take your woodworking projects to the next level. This kit includes everything you need to produce elegant through, half-blind, rebated half-blind dovetails and finger joints with ease. Clamp and cut both workpieces at the same time to create perfectly matching male and female dovetail cuts in one smooth operation.

Only [199.99]
 
BUY NOW >
 
 
 
 
 



Deep Throat G Clamps - 100mm x 250mm - Pack of 6

These deep throat G clamps will be invaluable in the workshop for reaching into inaccessible areas that are out of reach to standard clamps. The clamp bodies are made from high quality malleable iron which has been moulded into I profiles which will prevent the clamp from warping or twisting during use and makes them incredibly strong. The fast action acme thread is precision machined to enable smooth, fast clamping when needed. At the end of the threads are steel clamping pads which pivot to allow the clamps to exert even pressure on both flat and angled workpieces.

Only [69.99]
 
BUY NOW >
 
 
 
 
 



Premium Guide Rail Router Base Kit

This premium guide rail router base kit has all you need to convert your existing router into an extremely precise track router for accurate cuts every time. The guide rail router base is exceptionally well made, simple to set up and incredibly precise. It has two core functions: the first is for use with the premium guide rail for precise straight routing and the second is as a standalone router circle cutter. Two micro-adjustment cams allow you to eliminate any horizontal play between the rail and base to ensure an ultra-smooth movement along the rail. At the head of the unit is a 180mm diameter plate that accepts industry standard routers.

Only [169.99]
 
BUY NOW >
 
 
 
 
 




Woodturning and Carving Jig Kit

This kit features the jigs that are specifically designed for the shaping and sharpening of woodturning and carving tools. The kit includes R7557 turning tool jig, R7560 carving tool jig, R7561 profiled leather honing wheel and the R7563 tool rest jig. Precision made and designed for exact and consistent sharpening, to an industry standard size to fit all leading brands of wetstone sharpeners.

Only [69.99]
 
BUY NOW >
 
 
 
 
 




Master Jig Kit

This kit features the jigs that are specifically designed for the shaping and sharpening of fine edge woodworking tools, knives, turning tools and carving tools. The kit includes R7556 plane blade jig, R7558 knife jig, R7557 turning tool jig, R7560 carving tool jig, R7561 profiled leather honing wheel and the R7563 tool rest jig. Precision made and designed for exact and consistent sharpening, to an industry standard size to fit all leading brands of wetstone sharpeners.

Only [119.99]
 
BUY NOW >