Top Gifts Up to £50
Top Gifts
Up to £50
Perfect Christmas gifts for
the discerning woodworker
 
 
 
 


HVLP Paint Sprayer

Powered by a 600 watt motor, this high volume, low pressure (HVLP) paint sprayer allows for all popular coatings to be sprayed including stains, lacquers, varnishes, enamels, primers, acrylics and creosote, although some may need to be thinned before use. A high volume of fluid is sprayed at a low pressure, causing up to 90% less overspray compared to a conventional spray system. The low pressure allows you to lay the paint on rather than blasting it on, resulting in a softer, easier application of the spray, meaning much more of the finish ends up on the desired surface. As less fluid is consumed, material costs are reduced and there is less impact on your workshop, garage or garden surroundings.

Only [49.99]
 
BUY NOW >
 
 
 
 
 



Premium 180mm Japanese Sharpening Stone System 1000/2000/3000

This premium sharpening stone system is all that is needed to sharpen and hone chisels, plane blades, knives and more. A triangular prism houses 1000, 2000 and 3000 grit 180mm water stones, this prism can be rotated in its holder depending on your choice of water stone. The holder also acts as a trough to catch excess water and sharpening residue. A 60mm x 20mm wide mini-flattening stone is included for reshaping the surface of the stone, as well as a knife sharpening guide.

Only [39.99]
 
BUY NOW >
 
 
 
 
 



Premium Chrome Vanadium Screwdriver Set - 52 Piece

This set comprises of 52 premium quality screwdrivers and screwdriver bits. The blades are made from chrome vanadium alloy steel which has been hardened and tempered, making them particularly resistant to twisting during high torque screwdriving. The tips of these screwdrivers are machined to offer a better interface with the screw head, in turn preventing the blade from slipping. If you have ever had the screwdriver slip and damage the screw head, you will appreciate the superior grip these screwdrivers offer.

Only [34.99]
 
BUY NOW >
 
 
 
 
 


Premium Hand, Tenon and Toolbox Saws - Set of 3

This is our most popular set of saws and features a 500mm handsaw, 300mm tenon saw and a 380mm toolbox saw. The teeth on these hand saws are triple, diamond ground and will cut on both the pull and push stroke, making for an extremely fast cut. Each tooth is impulse hardened for a durable and long working life and are razor sharp to leave a super fine finish in hardwood, softwood, composite board and plastic. The tooth geometry allows for both ripping and cross cutting and swarf is quickly cleared from the teeth making them function in dry and wet woods without clogging. The blades are made from 1.0mm thick steel which is Teflon coated to ensure low friction for a smooth controlled cut.

Only [39.99]
 
BUY NOW >
 
 
 
 
 


Premium Router Edge and Mortice Guide

The premium router edge and mortice guide is designed for use with all leading brands of routers to create mortices, rebates, dadoes and for straight, curved or circular edge routing. The offset base is made from a special phenolic which is extremely hard wearing and offers minimal levels of friction to ensure a smooth passage over the workpiece. It features an oversized handle which is easy to grip, providing far superior control and improved stability. The base has an aperture that accepts industry standard brass guide bushes for use with routing jigs such as dovetail, sign writing and hinge jigs.

Only [49.99]
 
BUY NOW >
 
 
 
 
 



Digital Level Box

This is the latest advancement in angle sensor technology and is designed to self-calibrate if ever dropped by accident. It is the ideal tool for the accurate set up of table saw blades, jointer fences and bandsaw or drill press tables. The box allows angle measurement over a full 360° and the display read-out automatically inverts when measuring overhead, allowing the operator to view the measurement the correct way up. Accurate to 0.1 of a degree the LCD read-out has a back-display light for easy vision. Rare earth magnets built into the base of the box will lock rigidly onto saw blades and router cutters enabling hands-free operation of the machine for fast and correct angle set up.

Only [19.99]
 
BUY NOW >
 
 
 
 
 



Digital Tape Measure

This 5 metre digital tape measure is the latest advancement in measuring technology, making measuring easier, faster and more precise. A large easy to read LCD display can be set to metric or imperial readings and you can store up to two readings at the touch of a button eliminating the need to write down or remember the figure. These readings are easily recalled by holding down either the left or right buttons on the face of the tape, depending on which was used to store the reading. Extremely precise, the digital read out has a resolution of 1mm, the measuring scale is accurate to ±0.1mm, making it ideal for cabinetmakers and joiners who require accuracy each and every time.

Only [29.99]
 
BUY NOW >
 
 
 
 
 




Premium Aluminium Mini Pocket Hole Jig

Pocket hole jigs have become a standard workshop tool over the past decade and as such an array of low budget, entry level units have arrived on the market. This is definitely not one of them. This is a premium performance pocket hole jig made from CNC aircraft-grade aluminium which will allow you to produce incredibly strong, precise and clean joints when making kitchen cabinets, wardrobes, book cases and other furniture.

Only [29.99]
 
BUY NOW >
 
 
 
 
 



Premium Four Flute Auger Bits
- Set of 7

This box set of 7 four flute auger bits are ideal for quickly and accurately drilling deep holes in thicker stock. The four flute design is superior compared to single fluted auger bits when fast cutting and immediate chip removal is required. They can be used in either drill presses or electric hand drills and are designed to be used on softwoods, hardwoods and composite materials. The precise cutting geometry, the four cutting spurs, the four chisel like main cutters and the four flutes ensure accurate, clean holes while minimizing tearout on entry and exit of the hole.

Only [29.99]
 
BUY NOW >
 
 
 
 
 




Premium Aluminium Circular Drill Guide

Using a cordless drill driver without guiding or stabilising the drill bit increases the risk of the resultant hole being drilled incorrectly. This circular drill guide offers the stability and guidance that your drill requires to ensure each hole is drilled perfectly straight. Manufactured from aircraft-grade aluminium, a material recognised for its strength and durability, this guide has a 80mm diameter circular base which sits true to any flat workpieces and also features a V groove for drilling of round or edge stock.

Only [29.99]
 
BUY NOW >
 
 
 
 
 



Utility Bevel Edge Chisels
- Set of 8

These utility bevel edge chisels are made from a high carbon steel which has been hardened and tempered to Rc60 over the full length of the blade. This results in a blade that will hold a fine edge, over a long time and withstand the impact of heavy chopping cuts without chipping. The side bevels are finely ground to a narrow, tapered land for cleaning into angled corners and tight recesses. The blade and tang are forged from one piece of steel, which is seated deeply into the chisel handle for strength and durability.

Only [49.99]
 
BUY NOW >
 
 
 
 
 




Premium Carpenter's Mallet

Made in Germany, this premium mallet is perfectly balanced in both proportions and weight. The round head is favoured by cabinet makers and carvers as it allows you to control the impact in different directions with maximum striking precision. The head is made from German hornbeam, selected for its density and hardwearing nature and is one of the hardest indigenous woods. The head widens at the top allowing for an ergonomic hold and very precise blows.

Only [39.99]
 
BUY NOW >
 
 
 
 
 


Premium Aluminium 35mm Hinge Jig

This premium aluminium hinge jig is simple to use and guarantees precise hinge alignment every time, eliminating any guesswork when installing 35mm concealed hinges to cabinet doors. There are four pre-set indexing stops that allow you to set the bit 3mm, 4mm, 5mm or 6mm from the edge of the door to suit all the popular types concealed hinges. A series of etched graduations allow you to precisely set and then lock off the drilling depth from 0 to 25mm. You then simply mark a centre line on your door which you align with the centre marker which is cast into the body of the of the jig.

Only [39.99]
 
BUY NOW >
 
 
 
 
 



Power Tool Hose and Connector Kit - 32mm

Using extractors with power tools greatly improves workshop air quality and the performance of the tool by removing dust and debris from the point of contact with the workpiece. This new kit is supplied 3 metres of 32mm outside diameter, flexi-hose which is abrasion, puncture and kink resistant. The two threaded ports that screw on to the flexi-hose are made from a flexible rubber that is tapered to fit most power tool and bench top machine dust ports. The smaller rubber port has an outside diameter of 30mm and an internal diameter of 25mm and the larger rubber port has a 45mm outside diameter and a 37mm inside diameter.

Only [29.99]
 
BUY NOW >
 
 
 
 
 



Japanese Saws - Flush Cut
- Set of 2 with Roll

This set features the two most popular Japanese flush cutting saws, Kataba (R1010) and Ryoba (R1009) complete with a traditional Japanese saw roll for storage and protection. Made exclusively for Rutlands® by Gyokucho, the world's leading Japanese saw manufacturer, these saws have one stand out difference from their western counterparts; they cut on the pull stroke rather than the push stroke. The action of pulling the saw keeps the blade in tension through the cut, which allows the blade to be thinner and lighter, for a much smoother and faster cut.

Only [49.99]
 
BUY NOW >
 
 
 
 
 




Premium Concealed Hinge Drilling Jig

This concealed hinge drilling jig removes the guesswork when installing cabinet doors. It is extremely simple to use and it guarantees accurate hinge alignment, allowing you to install doors to a perfect fit. With the exception of a cordless drill no other tools are required as it comes complete with a 35mm tungsten tipped hinge bit with depth stop collar, 1.5mm pilot drill bit and location pin.

Only [24.99]
 
BUY NOW >
 
 
 
 
 




T Track and Mitre Slot Slider Bar
- 19mm x 450mm

With this slider bar you can custom build your own jigs and fixtures in the knowledge that they are going to run perfectly square in industry standard mitre slots of table saws or in 19mm T Track. The mitre bar is manufactured from hardened anodised aluminium, measuring 18.5mm wide x 8mm deep x 450mm long and features a series of 3 expansion discs to ensure zero side play and friction-free travel.

Only [19.99]
 
BUY NOW >
 
 
 
 
 



Dog Fences - 2x 100mm and 2x 200mm Fences with 20mm and 3/4" Posts - Set of 4

This set of 4 consists of 2 x 100mm and 2 x 200mm dog fences, each fence comes with 20mm and 3/4" posts for use in either 20mm or 3/4" dog holes. A dog fence is designed to be used on any workbench or tabletop that has dog holes already drilled. The fence can be positioned where required and can be used to hold workpieces against when routing, sanding or planing. The fence has two sides, one is 15mm for use with thinner workpieces and the other is 32mm for working with thicker workpieces.

Only [49.99]
 
BUY NOW >
 
 
 
 
 



Precision Aluminium Triangle Square - 150mm

This triangle square offers definite 45° and 90° angles that can be used for marking, checking and setting up of machinery and power tools around the workshop. The square features a lip on the front and back of its base which is used to secure it to the edge of your workpiece, once secured the square can be used to draw highly accurate perpendicular lines or 45° mitres. Used as a set up tool, the square can be used to instantly check or setup the angle of your machine bed or blade, ensuring the highest degree of accuracy.

Only [29.99]
 
BUY NOW >
 
 
 
 
 



Workshop Articulating Vice with Clamp - 63mm

Quickly secured to any work surface up to 40mm thick this multi purpose vice is the practical choice for home, garage and small workshop applications. The head rotates through 360° and features two sets of jaws. One pair of jaws measures 38mm wide by 16mm high and are smooth faced to protect the surface of the workpiece, whilst the other set measure 63mm wide by 16mm high and are serrated for powerful work holding and feature V notches for holding round stock.

Only [49.99]
 
BUY NOW >
 
 
 
 
 



Horizontal Toggle Clamp - 40mm & Plate with 20mm & 3/4" Posts

This 40mm auto adjusting horizontal toggle clamp with plate and posts allows you to use the toggle clamp wherever 3/4" or 20mm holes have been drilled. The plates are perfect to use with existing dog holes on workbenches or tabletops. There are four predrilled holes in the plate to allow you to mount your toggle clamp easily. The clamp can then be rotated around 360 degrees once it is placed inside a hole. The plate is 10mm thick which will naturally increase the maximum capacity of the horizontal toggle clamp.

Only [29.99]
 
BUY NOW >
 
 
 
 
 




T Track Hardware Kit 60 Piece
- 19mm and 8.3mm

Containing a selection of the most popular jig fixing hardware, this kit will allow you to make and mount home made jigs and fixtures to T tracks and mitre slots on router tables, table saws, drilling machines, work benches or anywhere you need to. This set will work with both 19mm and 8.3mm T tracks, as it contains slider bars for 19mm T tracks and T bolts that fit both the slider bars and fit directly into the slot in 8.3mm T tracks.

Only [29.99]
 
BUY NOW >
 
 
 
 
 



Premium Chuck Extender with Keyless Chuck

With an overall length of 300mm the chuck extender can drill and drive screws in areas previously unreachable. The 10mm capacity keyless chuck can be operated single handed and the extender features a sliding nylon handle that lets you apply greater lateral force. The chuck extender can be used in all standard drill chucks and its 1/4" hex quick change shank means it will fit directly into quick change chucks.

Only [19.99]
 
BUY NOW >
 
 
 
 
 




Premium Aluminium Corner Cutting Chisel

Corner chisels are used for squaring up hinge recesses in door frames and lock recesses in doors. Featuring an L shaped blade, the corner chisel cuts a perfect 90° angle every time. Simply line up with the rounded corner of the mortice, tap the firing pin with a hammer and a true clean square edge is produced.

Only [14.99]
 
BUY NOW >
 
 
 
 
 



Precision Aluminium Tapered Edge T Square Rule - 200mm

This T square rule is the best of its kind available. It has all the recognised features of a normal T square rule, but it just has that added bit of thought during the design process that makes it stand out from the crowd. The edges are tapered bringing the outer graduations level with your stock, to minimise parallax error. It has been machined from a single piece of aluminium to ensure that the extra large T head and blade are at a guaranteed 90° to each other.

Only [39.99]
 
BUY NOW >
 
 
 
 
 




Premium Hex Key Set

These metric hex keys have a large ergonomic handle that is designed for a comfortable grip and to exert high levels of torque. At one end of each key is a straight hex drive and on the other end is a ball hex drive. The ball hex drive allows for angled use when working in confined or difficult to access areas. The main bar of each key is made from hardened and tempered steel that will absorb high loads without the risk of damage or becoming brittle.

Only [19.99]
 
BUY NOW >
 
 
 
 
 



Mitre Angle Clamp - 56mm

Not to be confused with light weight aluminium mitre clamps this clamp is made from solid grey iron castings, a material noted for its wear resistance with a high compression strength. You are guaranteed a perfect mitre every time as the thick 19mm high cast walls will not deflect under heavy load. The internal face of the castings are CNC machined to ensure that the workpiece sits true both horizontally and vertically allowing for perfect mitre joints every time.

Only [29.99]
 
BUY NOW >
 
 
 
 
 




Precision Aluminium Ruler Stop & Rule

This rule set contains a precision 300mm steel rule and an aluminium rule stop. The set allows you to scribe parallel, perpendicular and 45° lines from the edge of workpieces. Once locked in place, the set can also be used as a repetitive measuring gauge for setting saw fences and router cutter depths. The rule stop can also be used with other lengths of rules providing they are between 25mm and 30mm wide.

Only [19.99]
 
BUY NOW >
 
 
 
 
 



Premium 180mm Multi-Profile Japanese Water Stone - Set of 3

These premium multi-profile Japanese water stones are designed for sharpening wood carving chisels, gouges and other fine tools with profiled blades. The stones feature both convex and concave radii profiles for in-cannel and out-cannel sharpening of gouges and V tools. The rear of the stone is flat to allow for the sharpening of straight edge tools such as skew and bevel edge chisels. This set consist of 1000, 2000 and 3000 grit profiled water stones.

Only [49.99]
 
BUY NOW >
 
 
 
 
 



Premium Skew Chisels Left and Right - Set of 2

Made in Germany, this set of right and left hand chisels with their 45° skew will leave a clean cut when trimming shoulders, dressing end grain or tidying inside corners. The blades are made from a premium quality chrome vanadium tool steel, which has high resistance to metal fatigue, to allow for use with a mallet or free hand. Each blade is hardened to Rc61 along its entire length, resulting in a blade that will hold and retain a sharp, fine edge, over the life of the tool, without becoming brittle when sharpened.

Only [39.99]
 
BUY NOW >
 
 
 
 
 



Ratchet Hand Clamps - 100mm
- Pack of 6

These extremely useful power ratchet clamps are excellent and ideal for all kinds of clamping tasks around the workshop. Quick to deploy and release, these clamps will apply as much or as little pressure as you need. Made from fibreglass reinforced nylon these clamps have hardened steel ratchet mechanisms that keep the work under pressure and prevent the clamp from slipping or loosening under load.

Only [49.99]
 
BUY NOW >
 
 
 
 
 





Bench Dust Nozzle - 100mm

This is consistently our most popular dust hose fitting and is used for cleaning workshop floors, workbench tops and power tool & machine tables. The 100mm outside diameter port connects to industry standard 102mm dust hoses and the large handle can be angled for maximum efficiency. Stiff nylon brushes at the working end dislodge stubborn dust and with an overall length of 500mm minimal bending is needed when cleaning the shop floor.

Only [29.99]
 
BUY NOW >
 
 
 
 
 



Premium Drill Bit Depth Stops
- 2 Piece Set

This drill bit depth stop kit comprises of a small and large stop which together accept shank diameters from 2mm to 10mm. The trouble with traditional depth stops that work by tightening a grub screw is that the grub screw can fall into a flute, due to vibrations when in use. When this happens the collar depth stop will work its way up or down your drill bit. The collet on these depth stops tightens around the drill bit, which eliminates this problem.

Only [9.99]
 
BUY NOW >
 
 
 
 
 



Precision Steel Bend Rule with Pencil and 12 Leads - 180mm

This steel bend rule has a 90 degree shape which allows it to comfortably sit over the corner of your workpiece, this means that you can simultaneously mark on two faces at once as well as marking right on the edge. The bend rule is very precise with three sets of marking holes every 0.5mm, one on each face and one saddling the edge. The rule also allows precise, straight, and parallel lines to be drawn at every 0.5mm relative from the workpiece edge.

Only [19.99]
 
BUY NOW >
 
 
 
 
 




Premium Grip Blocks - Pack of 12

This pack of 12 interlocking gripping blocks provide a secure hold on your workpiece without the need to use clamps. The grip is applied from below your work which allows you to work unobstructed from above. Perform long continuous passes over the entire length of your workpiece without stopping to reposition clamps. The anti-slip rubber surface grips both your bench top and the underside of your workpiece, raising it off the bench to create 25mm of clearance.

Only [39.99]
 
BUY NOW >
 
 
 
 
 




Premium Double Feather Board

This premium double feather board kit includes two single feather boards which can be used individually or they can be stacked together and used as a double feather board for supporting taller workpieces. These premium feather boards allow you to apply pressure closer to the router bit, at the most critical point, without risking injury to your fingers. The design of these feather boards allows you to make quick height adjustments whilst staying in parallel alignment with the workpiece and fence, essential for accurate routing.

Only [39.99]
 
BUY NOW >
 
 
 
 
 



Premium Flat Drill Bit Set with 150mm Extension

The new nose geometry of these flat bits allows for clean and fast boring of hardwoods, softwoods and composite materials such as MDF and plywood. The head of the bit is back tapered which means that there is extra clearance for the removal of swarf and shavings the deeper that you drill, preventing clogging and overheating of the workpiece. The carbon steel cutting edge is designed to break up and slice the swarf into smaller pieces for faster removal.

Only [19.99]
 
BUY NOW >
 
 
 
 
 




Oscillating Multi Tool

This multi tool excels at wood sawing and sanding and features a high torque motor with variable speed control from 15,000 to 20,000rpm. This additional torque and speed range is invaluable when using the wood cutting blades, as varying hardness's of wood require different speed settings in order to achieve a fine finish and prevent tearing of the grain. The tool oscillates at 3 degrees which allows for extremely clean sawing and fine finish sanding.

Only [39.99]
 
BUY NOW >
 
 
 
 
 




Extra Wide Clamp Cutting Guide
- 900mm

This clamp cutting guide is perfect for accurately cutting straight lines when using routers, saws or jigsaws. The guide can be clamped onto the workpiece with one hand and is guaranteed to be straight - no more using clamps and a straight edge to guide your power tool. Because the guide is clamped from below the workpiece there will be no obstructions above, and the high clamping strength means that the clamp will not move during use.

Only [39.99]
 
BUY NOW >
 
 
 
 
 




Mini Bench Grinder with Flexi Shaft

This mini bench grinder is designed to sharpen knives and tools, polish, grind, drill, deburr and remove rust. It is powered by a quiet running 100 watt motor that has a variable speed control from 3000 to 9000rpm with minimal levels of vibration. It comes fitted with fine (100 grit) and medium (80 grit) grinding wheels, and by removing the protective cap on the end of the drive shaft, you can attach the tapered mandrel allowing you to fit the supplied polishing mop, brass and steel wire wheels and the felt and cotton wheels.

Only [49.99]
 
BUY NOW >
 
 
 
 
 




Precision Awl

The most accurate way of placing screws or drilling holes is to start with a pilot hole. This positively locates the screw or drill bit right where it is needed before you start to drill or screw and keeps it in place while you do so. This is where an awl comes in useful. Its sharp point allows you to create the pilot hole precisely where you want it. This precision awl has an overall length of 125mm and is perfectly sized for any tool box or bag.

Only [19.99]
 
BUY NOW >
 
 
 
 
 



Premium Pocket Hole Screw Kit
- 700 Piece

Including six different types of screws with different lengths, threads and heads, this 700 piece pocket hole screw set contains all the screws you could need for making pocket hole joints. The screws have No 2 Square heads, recognised as the industry standard head style by cabinetmakers worldwide as they give the best grip and will not round. The screws either have a large washer head which gives the most surface area when tightening, or a pan head, ideal for use on smaller projects.

Only [29.99]
 
BUY NOW >
 
 
 
 
 



Premium Bit Holders - Set of 3 (60, 150, 300mm)

Fixing screws and drilling in hard to reach places can be extremely problematic especially when using a bulky drill driver or when working inside cupboards and cabinets. The hardened steel shafts run perfectly true and feature industry standard 1/4" hex shank magnetised bit holders for holding screwdriver and drill bits. The aluminium sleeves can move freely around the shank which allows you to hold the bit holder close to the bit for ultimate control.

Only [19.99]
 
BUY NOW >
 
 
 
 
 




Precision Aluminium Height Gauges - Set of 2

This set of two height gauges are perfect for setting up router bits or table saw blades. The smaller gauge allows for height measurements of 5mm up to 20.5mm in 0.5mm increments and the larger gauge 21mm to 36.5mm, again in 0.5mm increments. The two footed design allows them to stand directly over you router bit or table saw blade leaving your hands free to adjust them to your desired height.

Only [29.99]
 
BUY NOW >
 
 
 
 
 



Premium HSS Brad Point Drill Bits
- Set of 8

This set of 8 premium brad point bits are made from M2 high speed steel and are the finest wood drill bits that we have ever offered. They feature two lips on the perimeter, that finely score the circumference of the hole, prior to the chipping bevels removing the stock. This results in minimal fibre pull and tearing of the wood leaving extremely clean holes in hardwoods, softwoods and composite woods. This set contains 8 metric bits ranging from 3mm to 10mm in 1mm increments 3, 4, 5, 6, 7, 8, 9, 10mm and is supplied in a bespoke wooden presentation box.

Only [29.99]
 
BUY NOW >
 
 
 
 
 




Premium Flexible Screwdriver Bit Holder - 300mm

It is not always possible to get a drill driver or screwdriver where you need it to be or even at the correct angle you want to use it. Driving screws in tight spaces or close to sides of cabinets can be a major problem. Designed for use with a drill driver, this 300mm flexible shaft will bend and reach right where you need it to. It is highly versatile and can be used in both forward and reverse drive.

Only [19.99]
 
BUY NOW >
 
 
 
 
 



Premium Revolving Bowl Sanding Kit

This premium bowl sanding tool allows woodturners to leave a surface on a bowl, platter or goblet without any visible sanding marks, prior to adding a finish. The rotating sanding pad is driven by the rotation of the lathe, eliminating the unsightly lines often associated with traditional hand sanding. As you work through different abrasive grits, starting with the coarse grit and applying light pressure, you can achieve an ultra smooth surface ready for the finish of your choice.

Only [49.99]
 
BUY NOW >
 
 
 
 
 




Premium Router Circle Jig - 690mm

This premium router circle jig will allow you to rout circles from 20mm to 690mm in diameter with ease and accuracy. The circle compass is CNC machined from solid phenolic to allow for a smooth, no-mar passage over the workpiece. You simply drill a 6mm diameter hole with the supplied drill bit and insert the round lug that is attached to the aluminium sliding arm. You then adjust and lock off the sliding arm to your desired dimension.

Only [29.99]
 
BUY NOW >
 
 
 
 
 




Face Clamp - 75mm - Pack of 4

These face clamps feature a fast jaw clamping mechanism which allows them to be applied one handed within seconds with minimal adjustment being needed to alter the clamping capacity. The clamps are perfect for pocket hole joinery due to their large clamp faces which allow you to clamp over joint lines to ensure perfectly flush seams on your work pieces.

Only [49.99]
 
BUY NOW >
 
 
 
 
 



Premium Bi-Metal Japanese Arc Plunge Blade - Hardwood, Laminate - 32mm - Pack of 5

These premium bi-metal multi tool blades feature hardened high-speed steel teeth for extra long life. The blades have an arc cutting edge, which means that there is less tooth impact than with a traditional straight cutting edge, resulting in a cutting performance that is extremely precise, smooth and controlled. The Japanese pattern teeth are ground and side-set to allow for very fast and coarse cutting of hardwood, laminates and wood composites including plywood, particle board and MDF.

Only [24.99]
 
BUY NOW >
 
 
 
 
 



3 Way Edge G Clamps - 60mm x 70mm - Pack of 6

These 3-way edge G clamps are perfect for edging or lipping work because of their ability to clamp three faces at once. First clamp perpendicularly onto the workpiece and then use the remaining clamping arm to secure the edging or lipping. The clamp bodies are made from high quality malleable iron which has been moulded into I profiles which will prevent the clamp from warping or twisting during use and makes them incredibly strong.

Only [39.99]
 
BUY NOW >
 
 
 
 
 




Ratchet Cable Clamp - Mixed Pack of 30

These ratchet cable clamps can easily be used in the home or workshop and have a multitude of applications for woodworkers, joiners, electricians, and plumbers. Revolutionary in their design these clamps represent the perfect solution to real-life cable management problems. The clamps are safe to use anywhere in the home, office, workshop, garage, boat and anywhere else wires, cables, hoses, or ropes need to be kept in order.

Only [49.99]
 
BUY NOW >
 
 
 
 
 




Premium Router Radius Templates

No more searching for round objects to trace every time you wish to round off a corner; these quick and easy premium router radius templates will do the job for you. Precision CNC machined from aircraft-grade aluminium alloy, these lightweight but durable templates allow you to cut a perfect corner every time, softening the finished look of your project. This versatile set of 2 templates offers 4 different sized radii; R10, R15, R20 and R30, clearly etched on to the surface.

Only [34.99]
 
BUY NOW >
 
 
 
 
 




Premium Router Collet Extensions with ER Collets - Set of 2

A router collet extension is perfect to use when an increased height of router bits is needed on router tables, routing jigs or router bases. These extensions give 50mm of additional height and allows you to easily change router bits above your router table. Simply insert the extension into your router, then insert the router bit into the ER engineering collet and secure it by tightening the collet nut.

Only [49.99]
 
BUY NOW >
 
 
 
 
 


Premium 180mm Japanese Water Stone - Set of 3

These premium Japanese water stones are man-made from Corundum, a synthetic aluminium oxide abrasive, set in a resin bond. The finish that you achieve with a water stone is a combination of the particle size, durability of the abrasive and the resin bond strength. The 1000 grit water stone is the fastest cutting stone and is used to remove nicks before sharpening and to shape and establish a basic edge. The 2000 grit water stone is used after the 1000 grit stone to refine the edge of knives and tools and the 3000 grit water stone is used to quickly add a mirror finish and final polish.

Only [49.99]
 
BUY NOW >
 
 
 
 
 



Horizontal Toggle Clamp - 40mm with Plate for T Track

This 40mm auto adjusting horizontal toggle clamp and plate is designed to be used with T track to allow you to use the toggle clamp at any point along the length of track. You will be able to quickly position the clamp where needed without the need to drill any holes in a tabletop or bench. With traditional toggle clamps considerable time is taken setting up the clamp to suit the workpiece height, there is no setup required with these auto adjusting clamps as they automatically adjust to suit the workpiece height while maintaining a constant clamping pressure.

Only [29.99]
 
BUY NOW >
 
 
 
 
 




Premium Right Angle Bit Holder

This right angle bit holder has a slimline head meaning you can drill or screw close up to walls and into the tightest of spaces with ease. Its compact size makes it easy to control and manoeuver when working inside tight spaces where a traditional drill driver would simply be too large and bulky to position correctly. The shaft has a 1/4" hex shank and will fit into any 1/4" quick change hex chuck or standard drill chuck.

Only [19.99]
 
BUY NOW >
 
 
 
 
 





Premium Auger Drill Bits - Set of 6

This set of 6 auger bits are the best that we have ever offered or tested and are perfect for quickly and accurately drilling deep holes through thicker stock. They can be used in a drill press or electric hand drill and are designed to be used on softwoods and hardwoods. The precise cutting geometry, a single cutting spur on the perimeter and a chisel like main cutter ensures accurate, clean holes while minimizing tearout on entry and exit of the hole.

Only [49.99]
 
BUY NOW >
 
 
 
 
 




Sash Clamp Heads - Pack of 4

These sash clamp heads offer an economical alternative to full size sash or T bar clamps. They offer complete flexibility in terms of bar length and bar material. They are commonly used with wooden bars making them light in weight, yet very strong and easy to handle. They provide a maximum clamping force of 2000N and are perfect for clamping large objects such as kitchen cabinets, doors and window frames.

Only [49.99]
 
BUY NOW >
 
 
 
 
 




90 Degree Corner Clamp

These 90 degree corner clamps feature a fast jaw clamping mechanism which allows them to be applied one handed within seconds with minimal adjustment being needed to alter their clamping capacity. The clamp is self squaring to allow you to hold 90 degree corners and T joints together when making boxes, drawers, cabinets and cases. Simply clamp your two workpieces together at a perfect 90 degree angle which frees your hands and allows you to add your fasteners with ease.

Only [29.99]
 
BUY NOW >
 
 
 
 
 



Precision Steel T Rule with Pencil and 12 Leads - 200mm

This steel T rule is the most accurate way to mark a point from the edge of your workpiece, there is a marking hole every 0.25mm along the entire length of the blade. The rule also allows precise, straight, and parallel lines to be drawn at every 0.25mm from the workpiece edge. Simply insert a precision pencil into a hole and slide the T rule and pencil along to generate the line. Because the rule itself is 0.2mm thick there is zero parallax error which would be common with thicker rulers.

Only [19.99]
 
BUY NOW >
 
 
 
 
 




Premium HSS Twist Drill Bits
- Set of 25

This set of 25 premium twist drill bits can be used in a drill press or electric hand drill and are designed to be used on alloyed and non alloyed steel, non ferrous metal, cast iron and hard plastics. The bits have been fully ground to give precise concentricity to ensure a highly accurate hole. They have a split point and 135° drill point angle which gives the bit good centering properties meaning the bit will not wander as you start to drill.

Only [39.99]
 
BUY NOW >
 
 
 
 
 




Premium Flexible Right Angle Bit Holder

This right angle bit holder has a slimline head which is mounted on a 300mm flexishaft. You can drill or screw close to walls and into the tightest of spaces with ease. This bit holder can be used with both drill drivers and impact drivers as it has a precision geared chuck. Highly versatile, this bit holder will work in both forward and reverse and comes with a handle that can be mounted in two positions to suit how and where you are working.

Only [29.99]
 
BUY NOW >
 
 
 
 
 



Premium Router Guide Bush Set
- Metric

Guide bushes are used when material is required to be routed to a set pattern or shape. They are used in conjunction with worktop jigs, lock jigs, hinge jigs, sign writing jigs and any other form of router copying template. These guide bushes are precision machined from solid brass to ensure perfect concentricity and dimensional accuracy. This 11 piece set is supplied in a heavy duty storage case and contains 8 x metric guide bushes, 2 x locking nuts and a solid brass adaptor plate which fits most leading brands of router.

Only [39.99]
 
BUY NOW >
 
 
 
 
 



Clamping Squares - 200mm x 200mm - Pack of 10

These 200mm x 200mm assembly squares are ideally sized for large to medium sized work such as kitchen and cabinet construction, window and door frame assembly and general joinery work. They keep projects square during clamping and gluing and are extremely useful when assembling furniture and cabinets. Computer designed and manufactured for accuracy, these squares are made from a high impact polycarbonate, which gives them impressive strength, and they are accurate to +/- 0.05 of a degree.

Only [39.99]
 
BUY NOW >
 
 
 
 
 



Premium Aluminium Cabinet Handle Jig

This cabinet handle jig allows you to quickly and accurately install handles and knobs on door and drawer fronts without the need to make home made jigs or templates, saving up to 70% plus in installation time. Built for speed, this cabinet hardware jig does not require clamping or marking out. It features a laser engraved graduated scale detailing both metric and imperial dimensions. Extremely versatile you can install both horizontal and vertical handles and single and double fixing handles.

Only [39.99]
 
BUY NOW >
 
 
 
 
 



Digital Height and Depth Gauge

This digital height and depth gauge has been specifically designed for woodworkers to allow you to set saw blade and router bit heights, as well as measure mortice or slot depths, with exact precision. There is an interchangeable pin supplied for use when you are required to make depth measurements, with depths of up to 70mm being able to be measured. A large, easy to view LCD display reads in inches, fractions or millimetres. Precise accuracy can be achieved as millimetres are displayed in 0.01mm increments, decimal inches are displayed in 0.0005" increments and fractions in 64th's.

Only [19.99]
 
BUY NOW >
 
 
 
 
 




Premium Aluminium Edge Trimmer

Edge trimmers are designed to trim laminate edge banding to leave a perfectly flat and square edge between the banding and workpiece. This trimmer can be used on PVC, ABS, melamine and wood veneer. The trimmer blade has an adjustable depth which can be locked in place using a large, knurled brass knob, this will allow you to cut different depths of banding in each pass. The design of the body of the trimmer uses a lip to lock onto the edge of the workpiece which means it will always sit square to give a precise finish.

Only [29.99]
 
BUY NOW >
 
 
 
 
 




Premium Push Blocks - Pack of 2

Good quality push blocks are an essential safety aid when guiding stock through table saws, planers and router tables to keep your fingers clear of the blades. These push blocks are constructed from impact resistant polycarbonate for strength and durability. The handles have been ergonomically designed for comfort and are angled at 30° so that they can be used with either left or right hand proficiently.

Only [19.99]
 
BUY NOW >
 
 
 
 
 




Premium Glue Bottles - Set of 3

The best glue bottles available to avoid drips or spillages, the bottles are designed with a unique two chamber system that pushes the glue from the bottom up through the secondary side chamber to ensure fresh glue every time. When you stop squeezing the glue is drawn back into the main chamber to stop the tip from getting dirty and to prevent waste and a secure locking cap guarantees that there are no spillages.

Only [19.99]
 
BUY NOW >
 
 
 
 
 




Premium D4 Wood Glue - 1000ml
- Pack of 3

This premium, industrial-grade D4 PVA wood glue has been formulated to create a bond stronger than wood itself. It complies to international standards EN204 and is waterproof, impact and temperature resistant. It dries clear and can be used internally and externally, on all types of wood including hard and softwood, MDF, chipboard and plywood.

Only [24.99]
 
BUY NOW >
 
 
 
 
 




Workshop & Kitchen Stool with Swivel Seat

This stool is extremely comfortable and ideal for both workshop and kitchen seating. The seat features a heavy duty swivel mechanism that is made from a 2mm steel plate with 10mm ball bearings allowing it to smoothly rotate through 360°. The padded cushion is 80mm deep and 320mm in diameter and the seat has a 3° pitch to ensure the optimum seating angle when sat at your workbench.

Only [49.99]
 
BUY NOW >
 
 
 
 
 




Cast Iron Anvil - 5kg

Anvils have been around for centuries, yet they continue to be one of the most useful tools in the workshop. This anvil has been precision machined from grey cast iron castings to give a large flat working surface which is ideal for metal forming, riveting or general metal work. The surface features a 90 degree angle which you can use to shape your stock. The long tapering horn also provides varying radii when you need to bend your stock.

Only [29.99]
 
BUY NOW >