TCT Router Bit Set - 66 Piece
Multi Profile - 1/2" Shank

This 66 piece multi profile TCT router bit set is the ultimate collection of professional quality bits, offering incredible value for money and giving you an enormously diverse variety of choice, giving you the flexibility to take on any task with complete confidence and ease.

CLEARANCE PRICE
 
[149.99]   |   Save [120.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit Set - 6 Piece
Raised Panel Door & Drawer Making - 1/2" Shank

This 6 piece raised panel door and drawer making TCT router bit set offers a complete solution to producing elegant custom cabinet and kitchen doors and drawers. This kit contains ogee rail and stile bits, an undercutting raised panel bit, drawer lock joint bit, a reversible glue joint bit and an edge moulding bit.

CLEARANCE PRICE
 
[59.99]   |   Save [40.00]
 
BUY NOW >
 
 
 
 
 




TCT Router Bit Set - 3 Piece
Joint Making Set - 1/2" Shank

This 3 piece joint making TCT router bit set combines the three most popular jointing bits in one collection. The drawer lock joint bit, the reversible glue joint bit and the lock mitre bit.

CLEARANCE PRICE
 
[49.99]   |   Save [40.00]
 
BUY NOW >
 
 
 
 
 


TCT Router Bit Set - 7 Piece
Slot Cutter Set - 1/2" Shank

This 7 piece slot cutting TCT router bit set features a three wing design allowing for more cuts per second producing a smoother, better quality finish than two wings. This design means you get accurate results first time, requiring you to make fewer passes on your workpiece, saving you valuable time during your joining work. Commonly used with the 3.97mm blade for biscuit jointing these bits are also ideal for creating grooves, rabbets and slots for T-moulding.

CLEARANCE PRICE
 
[39.99]   |   Save [30.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit Set - 3 Piece
Raised Panel Door Making - 1/2" Shank

This 3 piece raised panel door making TCT router bit set contains two of the most commonly used rail and stile bits and an 88.9mm diameter traditional raised panel bit. This set is a perfect solution to creating custom panelled doors, forming strong, perfect fitting frame joints with deep grooves to accept the edges of panels, as well as producing matching panel edges.

CLEARANCE PRICE
 
[49.99]   |   Save [50.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit Set - 5 Piece
Raised Panel Door & Drawer Making - 1/2" Shank

This 5 piece raised panel door and drawer making TCT router bit set offers a complete solution to producing elegant custom cabinet and kitchen doors and drawers. This kit contains a drawer lock bit, a reversible glue joint bit, a raised panel bit and matching rail and stile bits.

CLEARANCE PRICE
 
[69.99]   |   Save [80.00]
 
BUY NOW >
 
 
 
 
 
TCT Router Bit - Flush Trim



TCT Router Bit - Flush Trim

Flush trim bits are used to trim overlaying edges of material such as laminates or veneers flush with the edge of a finished workpiece. These bits can also be used with a pre-cut template to copy and trim a workpiece to an existing profile. The two fluted cutting edges provide a clean and smooth final finish, leaving a neat edge on your workpiece.

CLEARANCE PRICE
 
From [8.99]   |   Save Up To [17.00]
 
 
 
 
 
 



TCT Router Bit - Slot with Arbors & Collars

Slot cutting bits with arbors and collars are used to produce rebates, grooves, slots for biscuits, producing tongue and groove stock, or for routing grooves for T-moulding. These bits cut slot depths of 14.3mm, in a range of cutting widths, and supplied with an arbor and stiffening collar.

CLEARANCE PRICE
 
From [16.99]   |   Save Up To [16.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit - Dovetail

Dovetail bits are used to produce one of the most popular types of joint in woodworking, both incredibly strong and aesthetically pleasing, found on cabinets, shelving units, drawers and boxes. These bits are typically used in a router table or with a handheld router and guide bush, and will produce both dovetail joints and sliding dovetails. Available in a range of angles, dovetail bits can also be used to make odd-angled chamfer cuts on the edges of material.

CLEARANCE PRICE
 
From [7.99]   |   Save Up To [9.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit - Round Nosed

Round nosed bits are used to produce round bottomed grooves for fluting and panelling, or concave edge moulding and other finishing work. With a bottom cutting edge, these bits are suitable for plunge cutting and will produce decorative flutes, drip grooves for cutting boards, and finger grooves for drawers. The smaller radiused bits are also ideal for lettering and sign making.

CLEARANCE PRICE
 
From [12.99]   |   Save Up To [15.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit - Flush Trim with Down Shear - D=12.7mm H=25.4mm S=1/2"

This flush trim with down shear TCT router bit features two flutes for fast, smooth and accurate cutting for use on laminates and veneers which need trimming flush with the base. The flush trim bits can also be used for pattern or template routing, where a pre-cut pattern is fixed to the workpiece and the flush trim bit removes material to replicate the pattern.

CLEARANCE PRICE
 
[14.99]   |   Save [18.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit - Rounded Ogee

Rounded ogee bits are used to produce decorative edging as well as furniture and panel moulding. The S-shaped ogee profile is one of the most popular types of traditional decorative finishes in woodworking. The cutting edge of these bits extends across the base, allowing them to be used within a plunge router to produce grooves across the faces of material. These bits feature a rounded bottom edge, and when used on the front of cabinet doors or drawers, give panels a raised appearance.

CLEARANCE PRICE
 
From [9.99]   |   Save Up To [10.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit - Extended Roundover

Extended roundover bits are used to produce a smooth radius, softening the appearance of exposed edges on furniture, moulding, tables and shelves. The elongated plunge cutting end will pierce through boards and produce a rounded over aperture. Adjusting the cutting height will add or remove a stepped edge, or fillet, along the resulting profile. Two equal passes either side of stock will produce a fully rounded, bull nose edge.

CLEARANCE PRICE
 
From [9.99]   |   Save Up To [12.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit - Door Edge - D=50.8mm H=31.8mm S=1/2"

This door edge TCT router bit creates professional quality decorative profiles on the door edges of your furniture perfect for bedroom and kitchen cupboards, chests and drawers. These door lip bits are an ideal addition to any cabinet door set and allow you to finish your door edges professionally in one pass.

CLEARANCE PRICE
 
[19.99]   |   Save [20.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit - Straight Single Flute

Straight single fluted bits are used when speed needs to take preference over the final finish. The improved chip clearing performance over double fluted bits allows for faster feed rates to be maintained, ideal for high production work such as routing grooves and dadoes.

CLEARANCE PRICE
 
From [7.99]   |   Save Up To [5.00]
 
BUY NOW >
 
 
 
 
 


TCT Router Bit Set - 2 Piece - Rail & Stile - 1/2" Shank

Rail and stile router bits are used to produce panelled door frames, commonly found on kitchen cabinets and cupboards. The set consists of a matched pair of 2 router bits: a profile bit and a scribe bit. The profile bit moulds the decorative profile onto the rails and stiles, whilst simultaneously cutting the 6.35mm groove to accept a raised or flat panel. The scribe bit cuts the ends of the rails and produces a mating profile to the stiles. This set features a classical profile and when paired with a raised panel bit, produces elegant custom-made doors.

CLEARANCE PRICE
 
[39.99]   |   Save [40.00]
 
BUY NOW >
 
 
 
 
 


TCT Router Bit - Reversible Rail & Stile - D=41.3mm H=23.8mm R=4.76mm S=1/2"

These reversible rail and stile TCT router bits are the most economical way of producing quality rail and stile joints when creating frames for raised panel doors and cabinets. The slot cutter, profile cutter and bearing can be assembled on the shaft in two different arrangements in order to cut both the rail and stile profile, with a standard sized 6.35mm groove for fitting raised panel edges.

CLEARANCE PRICE
 
[29.99]   |   Save [30.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit - Hinge Mortice

Hinge mortice bits are used to produce large shallow recesses, typically used for door hinges and latch plates. These bits feature a deep central gullet for maximum chip clearance, reducing the risk of clogging or overheating, ensuring a clean bottom cut. When fitting square hinges, the radiused corners will need cutting square with a hand chisel or corner chisel.

CLEARANCE PRICE
 
From [6.99]   |   Save Up To [9.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit - Bull Nose with Bearing

Bull nose with bearing bits are used to round over edges or produce decorative edge beading, typically used on stair treads, windowsills and shelves. These bull nose bits produce a fully rounded edge in a single pass, saving time when compared to roundover bits, which require a cut either side of the material.

CLEARANCE PRICE
 
From [12.99]   |   Save Up To [17.00]
 
BUY NOW >
 
 
 
 
 
TCT Router Bit Set - 3 Piece - Birds Mouth Set - 1/2


TCT Router Bit Set - 3 Piece
Birds Mouth Set - 1/2" Shank

This 3 piece birds mouth TCT router bit set allows you to create fast and accurate joints by only needing to machine one side of your workpiece. A stronger alternative to using simple mitre joints, these bits cut a notched profile for the flat edge to nest into and an increased surface area for glue application. These bits can be used to produce 6, 8, 12 and 16 sided shapes that can then be planed or sanded to produce circular forms if desired. Use these birds mouth bits to create a variety of decorative cylindrical and curved structures such as boxes, columns, arched chest lids and cones.

CLEARANCE PRICE
 
[59.99]   |   Save [40.00]
 
 
 
 
 
 


TCT Router Bit - Reversible Rail & Stile - D=41.3mm H=23.8mm R=2.38mm S=1/2"

These reversible rail and stile TCT router bits are the most economical way of producing quality rail and stile joints when creating frames for raised panel doors and cabinets. The slot cutter, profile cutter and bearing can be assembled on the shaft in two different arrangements in order to cut both the rail and stile profile, with a standard sized 6.35mm groove for fitting raised panel edges.

CLEARANCE PRICE
 
[29.99]   |   Save [30.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit - Straight

Straight with end cutting bits are used for cutting grooves, rebates, mortices and dadoes as well as trimming and template work when used with appropriate guide bushes. These straight bits have two parallel cutting edges that combine to produce an excellent finish as well as featuring a bottom cutting edge which allows for fast and efficient plunge cutting. The additional cutting tip on the end of the bit ensures that the bottom of routed holes are left with a smooth finish.

CLEARANCE PRICE
 
From [7.99]   |   Save Up To [18.00]
 
BUY NOW >
 
 
 
 
 
TCT Router Bit - Table Edge with Return - D=50.8mm H=29.3mm R1=7.93mm R2=15.9mm S=1/2



TCT Router Bit - Table Edge with Return - D=50.8mm H=29.3mm R1=7.93mm R2=15.9mm S=1/2"

These table edge TCT router bits produce beautifully elegant profiles perfect for finishing table edges, or adding decorative detail to your chair rails, cabinets and windowsills. These wide diameter bits create deep curves and by altering the depth of cut or using in conjunction with other table edge router bits you can create beautifully unique designs.

CLEARANCE PRICE
 
[29.99]   |   Save [15.00]
 
 
 
 
 
 



TCT Router Bit - Cove with Bearing

Cove with bearing bits are used to produce simple decorative edges on furniture, doors and drawer fronts. The bearing guide allows you to produce moulding around curved edges, ensuring a consistent depth of cut in relation to the edge. By moulding the edge of a board, and then cutting this off with a table saw, custom wooden trim can be produced, ideal for edging laminate floors to a specific type of wood.

CLEARANCE PRICE
 
From [9.99]   |   Save Up To [19.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit - Rabbeting with Bearing

Rabbeting with bearing bits are used to produce fast and accurate rebates on the edges of material. The included bearing guide ensures a consistent width of rebate. These bits are typically used for joint making, recessing the back of frames for accepting glass, and producing inset door, drawer and cabinet fronts.

CLEARANCE PRICE
 
From [9.99]   |   Save Up To [18.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit - Roundover with Bearing

Roundover with bearing bits are used to produce a smooth radius, softening the appearance of exposed edges on furniture, moulding, tables and shelves. Adjusting the cutting height will add or remove a stepped edge, or fillet, along the resulting profile. Two equal passes either side of stock will produce a fully rounded, bull nose edge.

CLEARANCE PRICE
 
From [9.99]   |   Save Up To [30.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit - Combination Flush & Bevel Trim - D=11.9mm H=12.7mm A=45° S=1/4"

Combination flush and bevel trim bits are used to produce both a flush trim or 45° bevel with a single bit. Economical and time saving, these bits are used to trim and bevel laminate and solid wood overlays on worktops, bench tops, cupboards and shelving.

CLEARANCE PRICE
 
[8.99]   |   Save [6.00]
 
BUY NOW >
 
 
 
 
 


TCT Router Bit - Reversible Rail & Stile - D=41.3mm H=23.8mm R=6.35mm S=1/4"

These reversible rail and stile TCT router bits are the most economical way of producing quality rail and stile joints when creating frames for raised panel doors and cabinets. The slot cutter, profile cutter and bearing can be assembled on the shaft in two different arrangements in order to cut both the rail and stile profile, with a standard sized 6.35mm groove for fitting raised panel edges.

CLEARANCE PRICE
 
[29.99]   |   Save [30.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit - V-Groove

V-groove bits are used to produce clean, sharp, V shaped grooves in the surfaces of material. Commonly used for engraving, sign writing and lettering, these bits can also be used to make a series of vertical grooves, imitating the appearance of tongue and groove panels on large pieces of material. When used in a router table with a fence, a basic chamfered edge can also be produced.

CLEARANCE PRICE
 
From [8.99]   |   Save Up To [12.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit - Flush & V-Groove - D=15.9mm H=25.4mm S=1/4"

Flush and V-groove bits are used to produce both a flush trimming cut and V-groove simultaneously. These bits are commonly used on laminates and solid lipping, for trimming cabinet face frames flush with the cabinet sides. The decorative V-groove hides unsightly glue joint lines and reduces time spent sanding.

CLEARANCE PRICE
 
[9.99]   |   Save [9.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit - Ogee

Ogee bits are used to produce decorative edging as well as furniture and panel moulding. The S-shaped ogee profile is one of the most popular types of traditional decorative finishes in woodworking. The cutting edge of these bits extends across the base, allowing them to be used within a plunge router to produce grooves across the faces of material. These bits feature a flat-bottomed edge, and when used on the front of cabinet doors or drawers, give panels a raised appearance.

CLEARANCE PRICE
 
From [9.99]   |   Save Up To [9.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit - Ovolo

These ovolo TCT router bits are widely used in furniture making and joinery to create decorative grooves with curved sides, a perfect choice for decorating raised panels, allowing the centre of the panel to stand out and appear raised. These bits can also be used on the edges of materials to provide a decorative finish on furniture such as window frames, or for use on strips of material to create beading.

CLEARANCE PRICE
 
From [8.99]   |   Save Up To [8.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit - Round Over Fillet - D=57.2mm H=23.8mm R=22.2mm S=1/2"

These roundover TCT router bits produce a smooth quality finish on the edges of your materials, helping to reduce the likelihood of splintering or chipping. These versatile roundover bits are also used to soften the appearance of hard edges on worktops and furniture and even to provide safe finishes for children's toys and boxes. This roundover bit features a fillet or step above the rounded edge for an additional decorative profile, and by raising or lowering the bit you can create further variations of profiles.

CLEARANCE PRICE
 
[24.99]   |   Save [25.00]
 
BUY NOW >
 
 
 
 
 


TCT Router Bit - Reversible Rail & Stile - D=41.3mm H=23.8mm A=120° S=1/2"

These reversible rail and stile TCT router bits are the most economical way of producing quality rail and stile joints when creating frames for raised panel doors and cabinets. The slot cutter, profile cutter and bearing can be assembled on the shaft in two different arrangements in order to cut both the rail and stile profile, with a standard sized 6.35mm groove for fitting raised panel edges.

CLEARANCE PRICE
 
[29.99]   |   Save [30.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit - Door Lip - D=31.8mm H=25.4mm R=6.35mm S=1/2"

This door lip TCT router bit serves both a functional and decorative purpose. These door lip bits are an ideal addition to any cabinet door set and allow you to finish your door edges professionally in one pass whilst simultaneously forming a rabbet on the back edge.

CLEARANCE PRICE
 
[14.99]   |   Save [18.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit - Triple Fluting - D=22.2mm H=28.6mm R=3.18mm S=1/2"

Triple fluting bits are used to produce ornamental detail on mouldings, columns and furniture. A triple fluted edge profile with 3.18mm radius beads can be produced in one pass, or only part of the bit used, to create unique profiles. When paired with a matched triple beading bit, a seamless joint can be created providing a large surface area for glue application.

CLEARANCE PRICE
 
[19.99]   |   Save [25.00]
 
BUY NOW >
 
 
 
 
 


TCT Router Bit - Reversible Rail & Stile - D=41.3mm H=23.8mm R=6.35mm S=1/2"

These reversible rail and stile TCT router bits are the most economical way of producing quality rail and stile joints when creating frames for raised panel doors and cabinets. The slot cutter, profile cutter and bearing can be assembled on the shaft in two different arrangements in order to cut both the rail and stile profile, with a standard sized 6.35mm groove for fitting raised panel edges.

CLEARANCE PRICE
 
[29.99]   |   Save [30.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit - Overhang Trim - D=9.53mm H=12.7mm T=3.18mm S=1/4"

Overhang trim bits are used for pre-trimming of laminates and veneers in preparation for a final flush cutting pass. The small overhang reduces the amount of material that needs to be trimmed in the final pass to minimise the risk of chipping and tear-out.

CLEARANCE PRICE
 
[8.99]   |   Save [5.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit - Multi Profile Beading - D=31.8mm H=25.4mm R=9.53mm R2=1.98mm S=1/2"

Multi profile beading bits are used to produce decorative profiles for face, corner and crown moulding. Featuring two differently sized radii, these multi profile beading bits can produce a number of single and multi-bead profiles. By adjusting the height of the bit, the position of the fence or by making multiple passes, an unlimited number of profiles can be produced.

CLEARANCE PRICE
 
[14.99]   |   Save [15.00]
 
BUY NOW >
 
 
 
 
 



TCT Router Bit - Straight - D=10.3mm H=25.4mm S=1/2"

Straight with end cutting bits are used for cutting grooves, rebates, mortices and dadoes as well as trimming and template work when used with appropriate guide bushes. These straight bits have two parallel cutting edges that combine to produce an excellent finish as well as featuring a bottom cutting edge which allows for fast and efficient plunge cutting. The additional cutting tip on the end of the bit ensures that the bottom of routed holes are left with a smooth finish.

CLEARANCE PRICE
 
[9.99]   |   Save [13.00]
 
BUY NOW >