Solid Carbide - Spiral Down Cut 3 Flute - D=12mm H=52mm L=102mm S=1/2"

Solid Carbide Router Bits
Each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. This ultimate micro-grain carbide formulation gives the longest tool life and edge retention ensuring a very clean and accurate cut that leads to the ultimate finish. These STC router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.

Spiral Down Cut Three Flute Bits
The three flute design of these spiral down cut bits leaves the best finish available from spiral bits on your project. The bits are used to push chips down and away from the machine to eliminate splintering and tearout, and provide the ultimate top surface finish. The down-cut geometry of the bits also works to hold the workpiece in place when used with CNC machines and handheld routers. These bits are ideal for cutting shallow dados, rabbets, and visible slots due to the clean finish provided on the edge of the hole or groove. When used for pattern routing or cutting through material, these bits allow clear vision of the cutting line to be maintained.

Superior Finish and Performance
Each spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety. ©