Premium Auger Drill Bits - Set of 6
Premium Auger Drill Bits - Set of 6
£49.99
inc. vat
Home > Drilling > Drill Bits > Auger Bits > Auger Bits Sets > Premium Auger Drill Bits - Set of 6

Key Features

  • Lifetime Warranty
    If any bit fails due to a material or manufacturing defect it will be replaced free of charge
  • Set of 6 Auger Bits
    8, 10, 12, 16, 20, 26mm supplied in a wooden presentation box
  • Made from a Special Grade of High Carbon Steel
    Extremely hard wearing and retains its hardness over prolonged use
  • Precise Cutting Geometry
    Ensures clean holes with minimal tearout on entry and exit of the hole
  • Threaded Centre Point
    Pulls the bit through the wood meaning little pressure is required
  • Deep Flutes
    Allows fast chip removal to prevent clogging when drilling deeper holes
  • Fully Ground
    Gives precise concentricity to ensure a highly accurate hole
  • Hexagonal Shank
    For a secure hold in the chuck to make sure the bit doesn't slip

Show more +

Bundles

Total: £79.98
This Item: Premium Auger Drill Bits - Set of 6
£49.99

Product Details

This set of 6 auger bits are the best that we have ever offered or tested and are perfect for quickly and accurately drilling deep holes through thicker stock. They can be used in a drill press or electric hand drill and are designed to be used on softwoods and hardwoods. The precise cutting geometry, a single cutting spur on the perimeter and a chisel like main cutter ensures accurate, clean holes while minimizing tearout on entry and exit of the hole. The cutting spur sits fractionally above the main cutter to ensure the bit enters the wood cleanly without tearing the wood fibres, the main cutter then follows to remove the material quickly to avoid the build-up of heat. The bits feature a threaded centre point which pulls the bit through the wood meaning minimal force is needed for the bit to work at full capacity. The deep flute allows fast chip removal to prevent clogging when drilling deeper holes.

The auger bits are made from high carbon steel which has been hardened to ensure a long service life and give the bits impressive cutting properties when compared to traditional steel auger bits. The bits have been fully ground to give precise concentricity to ensure a highly accurate hole. A hexagonal shaft ensures a secure hold that will not slip inside the chuck during use. Auger bits are normally used at low speeds between 700 and 2000rpm to prevent the wood from scorching. The speed depends on size, with the larger diameter bits being used at lower speeds.

These bits are certified to ensure the dimensional accuracy of the hole and the set contains 8, 10, 12, 16, 20 and 26mm bits. The overall length of the bits is 230mm with a flute length of 170mm. These premium auger bits give an exceptional drilling performance and come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge.
This set of 6 auger bits are the best that we have ever offered or tested and are perfect for quickly and accurately drilling deep holes through thicker stock. They can be used in a drill press or electric hand drill and are designed to be used on softwoods and hardwoods. The precise cutting geometry, a single cutting spur on the perimeter and a chisel like main cutter ensures accurate, clean holes while minimizing tearout on entry and exit of the hole. The cutting spur sits fractionally above the main cutter to ensure the bit enters the wood cleanly without tearing the wood fibres, the main cutter then follows to remove the material quickly to avoid the build-up of heat. The bits feature a threaded centre point which pulls the bit through the wood meaning minimal force is needed for the bit to work at full capacity. The deep flute allows fast chip removal to prevent clogging when drilling deeper holes.

The auger bits are made from high carbon steel which has been hardened to ensure a long service life and give the bits impressive cutting properties when compared to traditional steel auger bits. The bits have been fully ground to give precise concentricity to ensure a highly accurate hole. A hexagonal shaft ensures a secure hold that will not slip inside the chuck during use. Auger bits are normally used at low speeds between 700 and 2000rpm to prevent the wood from scorching. The speed depends on size, with the larger diameter bits being used at lower speeds.

These bits are certified to ensure the dimensional accuracy of the hole and the set contains 8, 10, 12, 16, 20 and 26mm bits. The overall length of the bits is 230mm with a flute length of 170mm. These premium auger bits give an exceptional drilling performance and come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge.

Show more +

Specifications

Brand Rutlands
Material High Carbon Steel
Shank Type Hex
Shank Diameter 10mm
Overall Length 230mm

Show more +
4.500 2 5

Customer Reviews

Reviews (2)
Write Review....

Rich

Comparable with the better brands available, the quality of these bits is really good. When drilling holes the bits never clog which I always find annoying. Ordered the set because there will always be a need for different sizes at some point. Would recommend.

Charles Morland

When using a pillar drill I prefer to use Forster bits for a nice clean finish. I though that at the price offered I'd chance it with a set of augers for when I'm working on larger timbers which are difficult if not impossible to get under a pillar drill.

To date I've only done some trial holes but have been very impressed. Freehand I've found that both corded and cordless drills have enough torque to deal with them. In fact I was expecting my 18 volt Makita cordless drill to struggle with the largest auger but it managed it with ease.

Show more +

Premium Auger Drill Bits - Set of 6

Rutlands
Part No. R4036
£49.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £14.99
  • Saturday Next Day UK - £14.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >