Brad Point Bits - Set of 8
£29.99
inc. vat
Key Features
- Lifetime Warranty
If any bit fails due to a material or manufacturing defect it will be replaced free of charge - Set of 8 Metric Brad Point Bits
3mm to 10mm in 1mm increments in a wooden presentation box - The Finest Brad Point Drill Bits That We Have Ever Offered
Made from M2 high speed steel - Two Lips on the Perimeter of the Nose
To finely score the circumference of the hole, prior to the chipping bevels removing the stock - Minimal Fibre Pull and Tearing of the Wood
Extremely clean holes in hard, soft and composite woods - Bits are Back Tapered from the Cutting Edge
Minimise friction and prevent binding - Fully Ground
Precise concentricity to ensure a highly accurate hole - Polished Deep Flutes
Fast chip clearance for smooth scorch-free side walls - Hardened M2 HSS
Bit will not deform and will always keep the same cutting geometry
Bundles
This Item: Brad Point Bits - Set of 8
£29.99
Product Details
This set of 8 premium brad point bits are made from M2 high speed steel and are the finest wood drill bits that we have ever offered. They feature two lips on the perimeter, that finely score the circumference of the hole, prior to the chipping bevels removing the stock. This results in minimal fibre pull and tearing of the wood leaving extremely clean holes in hardwoods, softwoods and composite woods.
The bits are back tapered from the cutting edge to minimise friction and prevent binding and have been fully ground to give precise concentricity to ensure a highly accurate hole. The deep flutes are polished to allow fast chip clearance, preventing the build up of swarf in the flutes, resulting in smooth, scorch-free side walls. M2 high speed steel is extremely hard wearing and retains its hardness over prolonged use, resulting in a bit that will not deform and which will always keep the same cutting geometry over its lifetime. After hardening these bits are tempered to reduce brittleness and increase ductility and toughness, staying sharp 10 times longer than carbon steel brad point bits.
This set contains 8 metric bits ranging from 3mm to 10mm in 1mm increments 3, 4, 5, 6, 7, 8, 9, 10mm and is supplied in a bespoke wooden presentation box. The bits are certified to ensure the dimensional accuracy of the hole. These premium HSS lipped brad point bits give an exceptional drilling performance and come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. Our choice in brad point drill bits for the discerning woodworker. ©
The bits are back tapered from the cutting edge to minimise friction and prevent binding and have been fully ground to give precise concentricity to ensure a highly accurate hole. The deep flutes are polished to allow fast chip clearance, preventing the build up of swarf in the flutes, resulting in smooth, scorch-free side walls. M2 high speed steel is extremely hard wearing and retains its hardness over prolonged use, resulting in a bit that will not deform and which will always keep the same cutting geometry over its lifetime. After hardening these bits are tempered to reduce brittleness and increase ductility and toughness, staying sharp 10 times longer than carbon steel brad point bits.
This set contains 8 metric bits ranging from 3mm to 10mm in 1mm increments 3, 4, 5, 6, 7, 8, 9, 10mm and is supplied in a bespoke wooden presentation box. The bits are certified to ensure the dimensional accuracy of the hole. These premium HSS lipped brad point bits give an exceptional drilling performance and come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. Our choice in brad point drill bits for the discerning woodworker. ©
This set of 8 premium brad point bits are made from M2 high speed steel and are the finest wood drill bits that we have ever offered. They feature two lips on the perimeter, that finely score the circumference of the hole, prior to the chipping bevels removing the stock. This results in minimal fibre pull and tearing of the wood leaving extremely clean holes in hardwoods, softwoods and composite woods.
The bits are back tapered from the cutting edge to minimise friction and prevent binding and have been fully ground to give precise concentricity to ensure a highly accurate hole. The deep flutes are polished to allow fast chip clearance, preventing the build up of swarf in the flutes, resulting in smooth, scorch-free side walls. M2 high speed steel is extremely hard wearing and retains its hardness over prolonged use, resulting in a bit that will not deform and which will always keep the same cutting geometry over its lifetime. After hardening these bits are tempered to reduce brittleness and increase ductility and toughness, staying sharp 10 times longer than carbon steel brad point bits.
This set contains 8 metric bits ranging from 3mm to 10mm in 1mm increments 3, 4, 5, 6, 7, 8, 9, 10mm and is supplied in a bespoke wooden presentation box. The bits are certified to ensure the dimensional accuracy of the hole. These premium HSS lipped brad point bits give an exceptional drilling performance and come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. Our choice in brad point drill bits for the discerning woodworker. ©
The bits are back tapered from the cutting edge to minimise friction and prevent binding and have been fully ground to give precise concentricity to ensure a highly accurate hole. The deep flutes are polished to allow fast chip clearance, preventing the build up of swarf in the flutes, resulting in smooth, scorch-free side walls. M2 high speed steel is extremely hard wearing and retains its hardness over prolonged use, resulting in a bit that will not deform and which will always keep the same cutting geometry over its lifetime. After hardening these bits are tempered to reduce brittleness and increase ductility and toughness, staying sharp 10 times longer than carbon steel brad point bits.
This set contains 8 metric bits ranging from 3mm to 10mm in 1mm increments 3, 4, 5, 6, 7, 8, 9, 10mm and is supplied in a bespoke wooden presentation box. The bits are certified to ensure the dimensional accuracy of the hole. These premium HSS lipped brad point bits give an exceptional drilling performance and come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. Our choice in brad point drill bits for the discerning woodworker. ©
Show more +
Specifications
Brand
Rutlands®
Material
M2 High Speed Steel
Shank Type
Round
Shank Diameter
3mm - 10mm
Overall Length
60mm - 120mm
Bit Diameters
3, 4, 5, 6, 7, 8, 9, 10mm
Show more +
5.000
6
5
Customer Reviews
Reviews (6)
Write Review....
Michael Dytham
Very nice set of drill bits work well and delivery was quick and well packaged. good job.
Ashley
Probably the best brad point drill bits you can buy. The diameters are extremely precise, the points are razor sharp, there is no chip out at the exit of the hole, no burning and the dust is cleared efficiently. Expensive but brilliant.
Gillian Knowles
Very good quality, nicely packaged and delivered very soon after ordering. Very sharp and clean cutting. I am pleased.
Ian McVae
Really impressed with these bits, they are truly the best brad points I have ever used. Really clean holes with no burning and the chips are removed so quickly and easily.
Gary Bardrick
Excellent set of bits. Have not used all of them yet, but the ones I have used are quite simply brilliant
Henry Ashmore
Well worth the money, it's true what they say - buy cheap, buy twice. The quality of these are evident out of the box, they come in a really nice foam lined wooden presentation box. Perform really well too.
Show more +
£29.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process