Premium HSS Brad Point Drill Bits - Set of 25
Premium HSS Brad Point Drill Bits - Set of 25
£69.99
inc. vat
Home > Drilling > Drill Bits > Brad Point Bits > Brad Point Bit Sets > Premium HSS Brad Point Drill Bits - Set of 25

Key Features

  • Lifetime Warranty
    If any bit fails due to a material or manufacturing defect it will be replaced free of charge
  • Set of 25 Metric Brad Point Bits
    1mm to 13mm in 0.5mm increments in a wooden presentation box
  • The Finest Brad Point Drill Bits That We Have Ever Offered
    Made from M2 high speed steel
  • Two Lips on the Perimeter of the Nose
    To finely score the circumference of the hole, prior to the chipping bevels removing the stock
  • Minimal Fibre Pull and Tearing of the Wood
    Extremely clean holes in hard, soft and composite woods
  • Bits are Back Tapered from the Cutting Edge
    Minimise friction and prevent binding
  • Fully Ground
    Precise concentricity to ensure a highly accurate hole
  • Polished Deep Flutes
    Fast chip clearance for smooth scorch-free side walls
  • Hardened M2 HSS
    Bit will not deform and will always keep the same cutting geometry

Show more +

Bundles

Total: £114.97
This Item: Premium HSS Brad Point Drill Bits - Set of 25
£69.99

Product Details

This set of 25 premium brad point bits are made from M2 high speed steel and are the finest wood drill bits that we have ever offered. They feature two lips on the perimeter, that finely score the circumference of the hole, prior to the chipping bevels removing the stock. This results in minimal fibre pull and tearing of the wood leaving extremely clean holes in hardwoods, softwoods and composite woods.

The bits are back tapered from the cutting edge to minimise friction and prevent binding and have been fully ground to give precise concentricity to ensure a highly accurate hole. The deep flutes are polished to allow fast chip clearance, preventing the build up of swarf in the flutes, resulting in smooth, scorch-free side walls. M2 high speed steel is extremely hard wearing and retains its hardness over prolonged use, resulting in a bit that will not deform and which will always keep the same cutting geometry over its lifetime. After hardening these bits are tempered to reduce brittleness and increase ductility and toughness, staying sharp 10 times longer than carbon steel brad point bits.

This set contains 25 metric bits ranging from 1mm to 13mm in 0.5mm increments 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 1.5, 11, 11.5, 12, 12.5, 13mm and is supplied in a bespoke wooden presentation box. The bits are certified to ensure the dimensional accuracy of the hole. These premium HSS lipped brad point bits give an exceptional drilling performance and come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. Our choice in brad point drill bits for the discerning woodworker. ©
This set of 25 premium brad point bits are made from M2 high speed steel and are the finest wood drill bits that we have ever offered. They feature two lips on the perimeter, that finely score the circumference of the hole, prior to the chipping bevels removing the stock. This results in minimal fibre pull and tearing of the wood leaving extremely clean holes in hardwoods, softwoods and composite woods.

The bits are back tapered from the cutting edge to minimise friction and prevent binding and have been fully ground to give precise concentricity to ensure a highly accurate hole. The deep flutes are polished to allow fast chip clearance, preventing the build up of swarf in the flutes, resulting in smooth, scorch-free side walls. M2 high speed steel is extremely hard wearing and retains its hardness over prolonged use, resulting in a bit that will not deform and which will always keep the same cutting geometry over its lifetime. After hardening these bits are tempered to reduce brittleness and increase ductility and toughness, staying sharp 10 times longer than carbon steel brad point bits.

This set contains 25 metric bits ranging from 1mm to 13mm in 0.5mm increments 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 1.5, 11, 11.5, 12, 12.5, 13mm and is supplied in a bespoke wooden presentation box. The bits are certified to ensure the dimensional accuracy of the hole. These premium HSS lipped brad point bits give an exceptional drilling performance and come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. Our choice in brad point drill bits for the discerning woodworker. ©

Show more +

Specifications

Brand Rutlands®
Material M2 High Speed Steel
Shank Type Round
Shank Diameter 1mm - 10mm
Overall Length 60mm - 150mm
Bit Diameters 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9...
Bit Diameters Cont. 9.5, 10, 1.5, 11, 11.5, 12, 12.5, 13mm

Show more +
4.778 9 5

Customer Reviews

Reviews (9)
Write Review....

Neetesh Gandhi

A quality set of Brad point bits .I agree with the other reviews about the display box where the hinges are out of line and upside down. The review however is about the bits which are superb for the price paid. I can't fault Rutlands .They provide tools at affordable prices and have notice the positive change in the products sold by Rutlands.
PS the customer service dept is very helpful and delivery of products second to none.

Brendanrd

Early days, as I've only had these drills a few days, they were well packed, nicely cased (as many Rutland products), and individually wrapped inside the case.
They are sharp, and the few holes I've drilled with them are nicely clean.

Colin Waters

Great set of drills at a very sensible price, cut a nice clean hole with little or no tear out, as accurate as any drill I have used and better than most. nice to have them in a fitted box to avoid damage.

Gerry White

Drill are excellent quality as expected. However, the wooden case, whilst good, is poorly finished and looks very amateurish afraid. Varnish looks rushed and haphazard, thicker in one part, missing elsewhere, hinges had screws at at an angle and the catches on the front, well one was upside down.

Shame as the extra money spent on the bits themselves, looks a bit gimmicky. I did email about it but not received a reply, to me that means they know about it and not able to help.

Michael Dytham

Very nice set of drill bits work well and delivery was quick and well packaged. good job.

Phil Cartright

Great bits for hard and soft woods. So many bits today have poorly machined noses but these ones are so consistent. I got my reading glasses out to look at the nose of the 1mm bit and it has exactly the same cutting geometry as the rest. Hard to find good bits today as everything seems price driven, Well done Rutlands.

Peter Rogers

Excellent bits. You only have to look at the spurs to see how well engineered they are.

John Bellamy

I used the 10mm bit in this set to drill out for dowels in English Oak, which is notoriously hard. Very easy entrance to the wood and no tears to the surface. I withdrew the bit every 10mm or so to clear the swarf. Cut was superb and so much easier and cleaner than my existing 'economy bit set'. Box is beautiful.

Bruce L

Excellent drills, but I can't help but feel they would be much more accessible in a no-frills metal flip up case. The wooden box they are supplied in is both impractical and poorly finished (big, sloppy varnish brush marks in random directions all over it). Feels like a pointless extra expense to make this feel more premium when, in terms of quality, the bits speak for themselves.

Show more +

Premium HSS Brad Point Drill Bits - Set of 25

Rutlands®
Part No. R4003
£69.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £15.99
  • Saturday Next Day UK - £19.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >