Utility Brad Point Drill Bits - Metric - Set of 25
Utility Brad Point Drill Bits - Metric - Set of 25
£29.99
inc. vat
Home > Drilling > Drill Bits > Brad Point Bits > Brad Point Bit Sets > Utility Brad Point Drill Bits - Metric - Set of 25

Key Features

  • Set of 25 Brad Point Bits
    Made from high carbon steel
  • Metric Sizes
    Ranging in size from 1mm to 13mm in 0.5mm increments
  • Leaves Clean Holes in Hard, Soft and Composite Woods
    Excellent for occasional use where HSS can not be justified
  • Bits are Back Tapered from the Cutting Edge
    Minimise friction and prevent binding
  • Fully Ground
    Precise concentricity to ensure a highly accurate hole
  • Polished Deep Flutes
    Fast chip clearance for smooth scorch-free side walls
  • Easy SIze Identification
    Supplied in a hinged steel case with diameter markings

Show more +

Bundles

Total: £39.98
This Item: Utility Brad Point Drill Bits - Metric - Set of 25
£29.99

Product Details

This set contains 25 utility brad point drill bits ranging in size from 1mm to 13mm in 0.5mm increments. Made from high carbon steel these brad point bits will leave clean holes in hardwood, softwood and composite wood and are excellent for occasional use, where the higher cost of HSS bits can not be justified. The bits are back tapered from the cutting edge to minimise friction and prevent binding and have been fully ground to give precise concentricity to ensure an accurate hole. The deep flutes are polished to allow fast chip clearance, preventing the build up of swarf in the flutes, resulting in smooth scorch-free side walls. The tips of the angled chipping bevels fully score the circumference of the hole for a clean entry.

Presented in a hinged steel carry case, these bits are organised and clearly marked for easy size identification. ©
This set contains 25 utility brad point drill bits ranging in size from 1mm to 13mm in 0.5mm increments. Made from high carbon steel these brad point bits will leave clean holes in hardwood, softwood and composite wood and are excellent for occasional use, where the higher cost of HSS bits can not be justified. The bits are back tapered from the cutting edge to minimise friction and prevent binding and have been fully ground to give precise concentricity to ensure an accurate hole. The deep flutes are polished to allow fast chip clearance, preventing the build up of swarf in the flutes, resulting in smooth scorch-free side walls. The tips of the angled chipping bevels fully score the circumference of the hole for a clean entry.

Presented in a hinged steel carry case, these bits are organised and clearly marked for easy size identification. ©

Show more +

Specifications

Brand Rutlands®
Material High Carbon Steel
Shank Type Round
Overall Length 35mm - 150mm
Bit Diameters 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5
Bit Diameters Continued 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5, 13

Show more +
5.000 9 5

Customer Reviews

Reviews (9)
Write Review....

Terry Hickman

Excellent quality, service and delivery and the do what it said on the tin!!!!!
All round excellence!!!!

Michael Harvey

Finding a set of Brad point drills with this range proved to be difficult but Rutlands hit a bullseye. A great set of drills, they have proved to be accurate and very useful - highly recommended. Rutlands service was excellent and will use again.

R Ferguson

Good range of drill bit sizes and I've found a use for most of them so far. Makes neat clean holes in oak and cherry and I'd definitely buy another set.

Aiden N

this is a really useful set of drill bits and excellent quality for the price. ive used them on pine, maple, beech and ash and they cut just as well on the harder woods as they do on the pine. the case is a good idea as every bit has a home. really pleased with this set.

Philip Collinge

Bought on special offer, glad I did, they cut clean and true and if used softly do not tear in or out.Make the job easier with such a comprehensive size range.

Brian Duff

I bought these on offer and wasn't expecting much for the price but I was very impressed with the quality and performance. The bits are very sharp and cut rather than tear through the wood. A real bargain.

John Cunningham

Rapid delivery of a product whose quality is superior to the price charged. Excellent range of sizes and the drills cut a clean hole.

Graham Cobb

It is very difficult trying to get hold of brad point drills in 0.5mm increments. So, to find a full set of these drills from 1mm to 13mm at such a cheap price is astounding. These are good quality drills, well made and they come in a nice, sturdy plastic case. These drills are accurate and very sharp an ideal for any workshop or tradesman. Cheap postage and rapid delivery. And, I must add, Rutlands after sales service is second to none. Graham.

Jon Richardson

I make small scale models using hard woods and I needed a set of accurate bits for drilling the wheel openings. At the price I was a bit dubious however I have been delighted with their performance. Admittedly I have only used three different bits, all of which were the smaller sizes. They drilled true and were good at removing the swarf. On current use I would highly recommend this set.

Show more +

Utility Brad Point Drill Bits - Metric - Set of 25

Rutlands®
Part No. R4133
£29.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £14.99
  • Saturday Next Day UK - £14.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >