Premium HSS Lipped Brad Point Drill Bit
Premium HSS Lipped Brad Point Drill Bit
£3.99
inc. vat
Home > Drilling > Drill Bits > Brad Point Bits > Brad Point Bits > Premium HSS Lipped Brad Point Drill Bit

Key Features

  • Lifetime Warranty
    If any bit fails due to a material or manufacturing defect it will be replaced free of charge
  • The Finest Brad Point Drill Bits That We Have Ever Offered
    Made from M2 high speed steel
  • Two Lips on the Perimeter of the Nose
    To finely score the circumference of the hole, prior to the chipping bevels removing the stock
  • Minimal Fibre Pull and Tearing of the Wood
    Extremely clean holes in hard, soft and composite woods
  • Bits are Back Tapered from the Cutting Edge
    Minimise friction and prevent binding
  • Fully Ground
    Precise concentricity to ensure a highly accurate hole
  • Polished Deep Flutes
    Fast chip clearance for smooth scorch-free side walls
  • Hardened M2 HSS
    Bit will not deform and will always keep the same cutting geometry

Show more +

Product Details

Made from M2 high speed steel these brad point bits are the finest that we have ever offered. They feature two lips on the perimeter, that finely score the circumference of the hole, prior to the chipping bevels removing the stock. This results in minimal fibre pull and tearing of the wood leaving extremely clean holes in hardwoods, softwoods and composite woods.

The bits are back tapered from the cutting edge to minimise friction and prevent binding and have been fully ground to give precise concentricity to ensure a highly accurate hole. The deep flutes are polished to allow fast chip clearance, preventing the build up of swarf in the flutes, resulting in smooth scorch-free side walls. M2 high speed steel is extremely hard wearing and retains its hardness over prolonged use, resulting in a bit that will not deform and which will always keep the same cutting geometry over its lifetime. After hardening these bits are tempered to reduce brittleness and increase ductility and toughness, staying sharp 10 times longer than carbon steel brad point bits.

These bits are certified to ensure the dimensional accuracy of the hole and are available in 1mm increments from 3mm to 18mm. These premium HSS lipped brad point bits give an exceptional drilling performance and come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. Our choice in brad point drill bits for the discerning woodworker. ©
Made from M2 high speed steel these brad point bits are the finest that we have ever offered. They feature two lips on the perimeter, that finely score the circumference of the hole, prior to the chipping bevels removing the stock. This results in minimal fibre pull and tearing of the wood leaving extremely clean holes in hardwoods, softwoods and composite woods.

The bits are back tapered from the cutting edge to minimise friction and prevent binding and have been fully ground to give precise concentricity to ensure a highly accurate hole. The deep flutes are polished to allow fast chip clearance, preventing the build up of swarf in the flutes, resulting in smooth scorch-free side walls. M2 high speed steel is extremely hard wearing and retains its hardness over prolonged use, resulting in a bit that will not deform and which will always keep the same cutting geometry over its lifetime. After hardening these bits are tempered to reduce brittleness and increase ductility and toughness, staying sharp 10 times longer than carbon steel brad point bits.

These bits are certified to ensure the dimensional accuracy of the hole and are available in 1mm increments from 3mm to 18mm. These premium HSS lipped brad point bits give an exceptional drilling performance and come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. Our choice in brad point drill bits for the discerning woodworker. ©

Show more +

Specifications

Brand Rutlands®
Material M2 High Speed Steel
Shank Type Round
Shank Diameter 3mm - 13mm
Overall Length 60mm - 160mm

Show more +
5.000 3 5

Customer Reviews

Reviews (3)
Write Review....

Rich Marsden

I had been using any old brad point bit in my workshop for projects until Rutlands marketing persuaded me to purchase one of these. I am very impressed, the difference between a standard bit is night and day.

Tim Degrow

Really clean entry which no chipping and left a perfect circle. No binding albeit I do clear the swarf every 10 - 15mm depth. Impressed.

Robert Wren

I use a 7mm bit on a regular basis to drill out pen blanks in very hard exotic woods. This drill bit was dimensionally accurate for fitting the pen tubes and was good at removing the swarf so that I did not constantly have to remove the bit after short drilling depths.

Show more +
Show more +

Premium HSS Lipped Brad Point Drill Bit

Rutlands®
Part No. M_R4004
£3.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £14.99
  • Saturday Next Day UK - £14.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >