Countersink Bit
£29.99
inc. vat
Key Features
- Lifetime Warranty
If any bit fails due to a material or manufacturing defect it will be replaced free of charge - Tungsten Carbide Tipped Countersinks
Produce countersunk recesses to leave screws flush with the wood or deeper recesses for plugging - M2 High Speed Steel Brad Point Bit
Quick and clean cut with excellent chip removal - Fully Adjustable
Either the depth of the clearance hole or the depth of the countersunk hole - Non-Marring Depth Stop
Free spinning, aluminium low friction collar to prevent marking of the wood - 1/4" Hexagonal Shank
Compatible with all quick change chucks and gives a secure hold in the chuck to make sure the bit doesn't slip
Product Details
These tungsten carbide tipped countersink drill bits with low friction depth stops and M2 high speed steel brad point pilot bits are truly the best we have ever offered or tested. You can adjust the brad point bit to change the depth of the clearance hole, and you can adjust the rotating depth stop to change the depth of the countersink hole. A deeper recess is used when you want to use plugs, or you can set the depth of the recess to leave your screw flush with the surface. The 2, 3 & 4mm bits produce a major hole diameter of 9.5mm, for use with 9.5mm plugs. The 5 & 6mm bits produce a major hole diameter of 12.7mm, for use with 12.7mm plugs. The depth stop has a free spinning, aluminium low-friction collar that is nylon faced to prevent burning or marking of the wood surface. The collar has large openings on its side to help with the removal of chips, ensuring they do not clog.
The M2 high speed steel brad point bits offer a quick and clean cut alongside excellent chip removal, making them ideal for drilling the clearance holes. The tungsten carbide tipped countersink bits cleanly cut the recess and ensure that there is no scorching of the wood. Both the drill bits and countersinks are suited for use with softwoods, hardwoods and composite materials and they can be used in drill presses or electric hand drills.
The quick change ¼" hex shank is compatible with all ¼" hex shank quick change systems, it will ensure a secure hold that will not slip inside the chuck during use. These bits are certified to ensure dimensional accuracy and are available in 2, 3, 4, 5 and 6mm pilot hole drill bits. These countersink bits have an exceptional performance and come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. ©
The M2 high speed steel brad point bits offer a quick and clean cut alongside excellent chip removal, making them ideal for drilling the clearance holes. The tungsten carbide tipped countersink bits cleanly cut the recess and ensure that there is no scorching of the wood. Both the drill bits and countersinks are suited for use with softwoods, hardwoods and composite materials and they can be used in drill presses or electric hand drills.
The quick change ¼" hex shank is compatible with all ¼" hex shank quick change systems, it will ensure a secure hold that will not slip inside the chuck during use. These bits are certified to ensure dimensional accuracy and are available in 2, 3, 4, 5 and 6mm pilot hole drill bits. These countersink bits have an exceptional performance and come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. ©
These tungsten carbide tipped countersink drill bits with low friction depth stops and M2 high speed steel brad point pilot bits are truly the best we have ever offered or tested. You can adjust the brad point bit to change the depth of the clearance hole, and you can adjust the rotating depth stop to change the depth of the countersink hole. A deeper recess is used when you want to use plugs, or you can set the depth of the recess to leave your screw flush with the surface. The 2, 3 & 4mm bits produce a major hole diameter of 9.5mm, for use with 9.5mm plugs. The 5 & 6mm bits produce a major hole diameter of 12.7mm, for use with 12.7mm plugs. The depth stop has a free spinning, aluminium low-friction collar that is nylon faced to prevent burning or marking of the wood surface. The collar has large openings on its side to help with the removal of chips, ensuring they do not clog.
The M2 high speed steel brad point bits offer a quick and clean cut alongside excellent chip removal, making them ideal for drilling the clearance holes. The tungsten carbide tipped countersink bits cleanly cut the recess and ensure that there is no scorching of the wood. Both the drill bits and countersinks are suited for use with softwoods, hardwoods and composite materials and they can be used in drill presses or electric hand drills.
The quick change ¼" hex shank is compatible with all ¼" hex shank quick change systems, it will ensure a secure hold that will not slip inside the chuck during use. These bits are certified to ensure dimensional accuracy and are available in 2, 3, 4, 5 and 6mm pilot hole drill bits. These countersink bits have an exceptional performance and come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. ©
The M2 high speed steel brad point bits offer a quick and clean cut alongside excellent chip removal, making them ideal for drilling the clearance holes. The tungsten carbide tipped countersink bits cleanly cut the recess and ensure that there is no scorching of the wood. Both the drill bits and countersinks are suited for use with softwoods, hardwoods and composite materials and they can be used in drill presses or electric hand drills.
The quick change ¼" hex shank is compatible with all ¼" hex shank quick change systems, it will ensure a secure hold that will not slip inside the chuck during use. These bits are certified to ensure dimensional accuracy and are available in 2, 3, 4, 5 and 6mm pilot hole drill bits. These countersink bits have an exceptional performance and come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. ©
Show more +
Specifications
Brand
Rutlands®
Countersink Material
Tungsten Carbide
Drill Bit Material
M2 High Speed Steel
Shank Type
Quick Change Hex
Shank Diameter
6.35mm
Overall Length
100mm
Countersink Diameter
9.5mm for 2, 3, 4mm Bits & 12.7mm for 5, 6mm Bits
Show more +
4.857
7
5
Customer Reviews
Reviews (7)
Write Review....
Philip Levick
Great product from Rutlands at a very reasonable price. Thanks
Manuel Oliveira
Brilliant. Exactly what was I was after, great quality and cheaper than alternatives.
Edward Tucker
Great little tool really happy with my choice.
Martin Hamlyn
This is a nice bit of kit for the toolbox. once set up there no chance of going too deep with your countersink. and gives great repeatability. I've deducted 1 star because the supplied allen key is low quality and rounded off on my first adjustment. As I'm using it for a job on polycarbonate so have had to change the brad type drill bit. but that doesn't affect my rating.
Simon Ashton
Really good quality item, the depth stop takes the guess work out of the equation so speeds up work time for consistent finish. The cutters being made of tungsten means they seemingly never get dull to give a long working life.
My cabinet makers love them. Simon, Ashton and Coleman LTD.
My cabinet makers love them. Simon, Ashton and Coleman LTD.
Vincent Metcalfe
A great countersink with depth stop really pleased with what I bought, does just the job
Tony Beeson
Excellent piece of kit,easy transaction and fast delivery.
Show more +
Countersink Bit - 2mm
Countersink Bit - 3mm
Countersink Bit - 4mm
Countersink Bit - 5mm
Countersink Bit - 6mm
£29.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process