Premium Flat Drill Bit Set with 150mm Extension
£19.99
inc. vat
Key Features
- Lifetime Warranty
If any bit fails due to a material or manufacturing defect it will be replaced free of charge - Made from a Special Grade of High Carbon Steel
Extremely hard wearing and retains its hardness over prolonged use - Precise Cutting Geometry
Ensures clean holes with minimal tearout on entry and exit of the hole - Back Tapered Head
Allows for quicker removal of swarf to prevent clogging when drilling deeper holes - Carbon Steel Cutting Edge
Designed to break up and slice the swarf into smaller pieces for faster removal - 1/4" Quick Change Shank
For a secure hold in the chuck to make sure the bit doesn't slip - Set Contents
13 bits ranging from 6mm through to 25mm and a 150mm extension bar
Bundles
Product Details
The new nose geometry of these flat bits allows for clean and fast boring of hardwoods, softwoods and composite materials such as MDF and plywood. The head of the bit is back tapered which means that there is extra clearance for the removal of swarf and shavings the deeper that you drill, preventing clogging and overheating of the workpiece. The carbon steel cutting edge is designed to break up and slice the swarf into smaller pieces for faster removal.
The flat bits are made from high carbon steel which has been hardened to ensure a long service life and give the bits impressive cutting properties when compared to traditional steel flat bits. Flat bits are normally used at low speeds between 700 and 2000rpm to prevent the wood from scorching. The speed depends on size, with the larger diameter bits being used at lower speeds.
The shanks are hardened to prevent flexing ensuring a true cylindrical hole and feature a 1/4" hex head for use in screwdriver bit holders or direct in the jaws of a drill chuck. Supplied in a wooden presentation case, the 13 bits range from 6mm through to 25mm and measure 150mm in overall length. A 150mm extension bar completes the set allowing for deep drilling of beams and boards. These premium flat bits give an exceptional drilling performance and come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. ©
The flat bits are made from high carbon steel which has been hardened to ensure a long service life and give the bits impressive cutting properties when compared to traditional steel flat bits. Flat bits are normally used at low speeds between 700 and 2000rpm to prevent the wood from scorching. The speed depends on size, with the larger diameter bits being used at lower speeds.
The shanks are hardened to prevent flexing ensuring a true cylindrical hole and feature a 1/4" hex head for use in screwdriver bit holders or direct in the jaws of a drill chuck. Supplied in a wooden presentation case, the 13 bits range from 6mm through to 25mm and measure 150mm in overall length. A 150mm extension bar completes the set allowing for deep drilling of beams and boards. These premium flat bits give an exceptional drilling performance and come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. ©
The new nose geometry of these flat bits allows for clean and fast boring of hardwoods, softwoods and composite materials such as MDF and plywood. The head of the bit is back tapered which means that there is extra clearance for the removal of swarf and shavings the deeper that you drill, preventing clogging and overheating of the workpiece. The carbon steel cutting edge is designed to break up and slice the swarf into smaller pieces for faster removal.
The flat bits are made from high carbon steel which has been hardened to ensure a long service life and give the bits impressive cutting properties when compared to traditional steel flat bits. Flat bits are normally used at low speeds between 700 and 2000rpm to prevent the wood from scorching. The speed depends on size, with the larger diameter bits being used at lower speeds.
The shanks are hardened to prevent flexing ensuring a true cylindrical hole and feature a 1/4" hex head for use in screwdriver bit holders or direct in the jaws of a drill chuck. Supplied in a wooden presentation case, the 13 bits range from 6mm through to 25mm and measure 150mm in overall length. A 150mm extension bar completes the set allowing for deep drilling of beams and boards. These premium flat bits give an exceptional drilling performance and come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. ©
The flat bits are made from high carbon steel which has been hardened to ensure a long service life and give the bits impressive cutting properties when compared to traditional steel flat bits. Flat bits are normally used at low speeds between 700 and 2000rpm to prevent the wood from scorching. The speed depends on size, with the larger diameter bits being used at lower speeds.
The shanks are hardened to prevent flexing ensuring a true cylindrical hole and feature a 1/4" hex head for use in screwdriver bit holders or direct in the jaws of a drill chuck. Supplied in a wooden presentation case, the 13 bits range from 6mm through to 25mm and measure 150mm in overall length. A 150mm extension bar completes the set allowing for deep drilling of beams and boards. These premium flat bits give an exceptional drilling performance and come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. ©
Show more +
Specifications
Brand
Rutlands®
Bit Diameters
6, 8, 10, 12, 13, 14, 16, 17, 18, 19, 20, 22 and 25mm
Overall Length
150mm
Extension Length
150mm
Show more +
5.000
3
5
Customer Reviews
Reviews (3)
Write Review....
Graeme Richards
Very happy with this set of comprehensive flat bits. Nicely presented in box to keep bits secure rather than searching for the one you want at the bottom of your toolbox.
John Rich
Great set of bits, finally found a set that actually cuts as they should! Cased plus extension piece which comes in handy in awkward places....
Neil Chatwin
Great set of quality flat bits all the sizes for mist jobs maybe add a 32mm for total coverage
Nice wooden box to keep them tidy and extension bar too
Nice wooden box to keep them tidy and extension bar too
Show more +
£19.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process