Premium Forstner Sawtooth Drill Bits - Set of 21
£199.99
inc. vat
Home > Drilling > Drill Bits > Forstner Bits > Forstner Bit Sets > Premium Forstner Sawtooth Drill Bits - Set of 21
Key Features
- Lifetime Warranty
If any bit fails due to a material or manufacturing defect it will be replaced free of charge - Made from a Special Grade of High Carbon Steel
Extremely hard wearing and retains its hardness over prolonged use - Teeth Have a Skewed Geometry
Ensures minimal fibre pull and tearing of the wood - Bits Will Not Deform Under Heat
Always keep the same cutting geometry, over their lifetime - Rim of the Bit is a Fraction of a Millimetre Higher than the Chippers
Results in bit entering the wood cleanly, prior to the chippers clearing the wood - Double-Chip Channels
Swarf is quickly cleared, minimising rim heat, allowing for clean cut, flat bottom holes in hard, soft and exotic woods - Bits are Back Tapered from the Cutting Edge
Reduces friction and prevents binding
Bundles
This Item: Premium Forstner Sawtooth Drill Bits - Set of 21
£199.99
Product Details
This set of 21 is our largest collection of premium forstner bits and includes 8, 10, 12, 13, 14, 15, 16, 18, 19, 20, 22, 24, 25, 26, 28, 30, 32, 35, 38, 40 and 45mm diameter bits, each with an overall length of 90mm and a 10mm round shank. These forstner sawtooth bits are made from a special grade of high carbon steel which is extremely hard wearing and retains its hardness over prolonged use, resulting in a bit that will not deform under heat and which will always keep the same cutting geometry, over its lifetime.
The rim of the forstner bit is a fraction of a millimetre higher than the chippers which results in the bit entering the wood cleanly, prior to the chippers clearing the wood. The double-chip channels means swarf is quickly cleared, minimising rim heat, allowing for clean cut, flat bottom holes in hard, soft and exotic woods. The teeth have a skewed geometry to ensure minimal fibre pull and tearing of the wood. The bits are back tapered from the cutting edge to reduce friction and prevent binding and have been fully ground to give precise concentricity to ensure a highly accurate hole. These bits are primarily used in a drill press or the tailstock of a lathe when boring end grain.
These premium forstner sawtooth bits give an exceptional drilling performance and come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. The bits are supplied in individual plastic storage cases for protection. Our choice in forstner bits sets for the discerning woodworker and woodturner. ©
The rim of the forstner bit is a fraction of a millimetre higher than the chippers which results in the bit entering the wood cleanly, prior to the chippers clearing the wood. The double-chip channels means swarf is quickly cleared, minimising rim heat, allowing for clean cut, flat bottom holes in hard, soft and exotic woods. The teeth have a skewed geometry to ensure minimal fibre pull and tearing of the wood. The bits are back tapered from the cutting edge to reduce friction and prevent binding and have been fully ground to give precise concentricity to ensure a highly accurate hole. These bits are primarily used in a drill press or the tailstock of a lathe when boring end grain.
These premium forstner sawtooth bits give an exceptional drilling performance and come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. The bits are supplied in individual plastic storage cases for protection. Our choice in forstner bits sets for the discerning woodworker and woodturner. ©
This set of 21 is our largest collection of premium forstner bits and includes 8, 10, 12, 13, 14, 15, 16, 18, 19, 20, 22, 24, 25, 26, 28, 30, 32, 35, 38, 40 and 45mm diameter bits, each with an overall length of 90mm and a 10mm round shank. These forstner sawtooth bits are made from a special grade of high carbon steel which is extremely hard wearing and retains its hardness over prolonged use, resulting in a bit that will not deform under heat and which will always keep the same cutting geometry, over its lifetime.
The rim of the forstner bit is a fraction of a millimetre higher than the chippers which results in the bit entering the wood cleanly, prior to the chippers clearing the wood. The double-chip channels means swarf is quickly cleared, minimising rim heat, allowing for clean cut, flat bottom holes in hard, soft and exotic woods. The teeth have a skewed geometry to ensure minimal fibre pull and tearing of the wood. The bits are back tapered from the cutting edge to reduce friction and prevent binding and have been fully ground to give precise concentricity to ensure a highly accurate hole. These bits are primarily used in a drill press or the tailstock of a lathe when boring end grain.
These premium forstner sawtooth bits give an exceptional drilling performance and come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. The bits are supplied in individual plastic storage cases for protection. Our choice in forstner bits sets for the discerning woodworker and woodturner. ©
The rim of the forstner bit is a fraction of a millimetre higher than the chippers which results in the bit entering the wood cleanly, prior to the chippers clearing the wood. The double-chip channels means swarf is quickly cleared, minimising rim heat, allowing for clean cut, flat bottom holes in hard, soft and exotic woods. The teeth have a skewed geometry to ensure minimal fibre pull and tearing of the wood. The bits are back tapered from the cutting edge to reduce friction and prevent binding and have been fully ground to give precise concentricity to ensure a highly accurate hole. These bits are primarily used in a drill press or the tailstock of a lathe when boring end grain.
These premium forstner sawtooth bits give an exceptional drilling performance and come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. The bits are supplied in individual plastic storage cases for protection. Our choice in forstner bits sets for the discerning woodworker and woodturner. ©
Show more +
Specifications
Brand
Rutlands®
Material
High Carbon Steel
Shank Type
Round
Shank Diameter
10mm
Overall Length
90mm
Bit Diameters
8, 10, 12, 13, 14, 15, 16, 18, 19, 20, 22mm
Bit Diameters (Continued)
24, 25, 26, 28, 30, 32, 35, 38, 40, 45mm
Show more +
5.000
11
5
Customer Reviews
Reviews (11)
Write Review....
Edward Wilkinson
Really pleased with these bits - needed a set like this for some time - impressed by low cost and high quality finish on the holes produced. A really excellent buy. Thank you Rutlands
Andrew Johnson
Can't really comment as I have not used them yet but email was asking for a review. Bought them from one of the daily price drop, good price for a set. Other reviews rate then so I have no reason to believe they are no good. I just found it odd how the set skips sizes upto the 20mm, no 9mm, 11mm or 17mm.
Alasdair Pettifer
Good clean cut and finish with almost no clogging while cutting. They also have a longer shaft than the other Fostner bits I have used.
John Bowen
very impressed this is the first quality set i have owned. they cut so much easier and create a much cleaner hole
David K.
I have been working with Forstner bits for years now but came to my senses and bought these saw-tooth bits which deal with end grain with great ease. Good product and good performance!
ken stutter
i have used since buying very sharp ,cut is smooth even the base ; thumbs up from me .
Mikel Sanderson
Top, top quality forstner bits! I haven't used all sizes but the ones I have are definitely amazing, they cut through oak like a hot knife through butter. Absolutely no burning of the wood, even when using at slightly higher speeds.
Mike Stone
I recently purchased this set of forstner bits and have had little chance to fully use them, however I have examined them closely and find that the quality is excellent and should last a long time. They do cut end grain wood very well.
Brian Minchin
Top quality tool, top quality delivery all from a from a top quality company.
Paul Carroll
I am building up a full set of bits as I can afford them or when I need them. So glad I chose Rutland, great quality kit and terrific service.
Gareth Jones
Really happy with this purchase, I ordered a 35mm bit to use when I installed my new kitchen cabinet doors. Very smooth to use and left a perfectly flat bottomed hole. Would recommend.
Show more +
£199.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process