Premium Forstner Sawtooth Drill Bits - Set of 6
Premium Forstner Sawtooth Drill Bits - Set of 6
£39.99
inc. vat
Home > Drilling > Drill Bits > Forstner Bits > Forstner Bit Sets > Premium Forstner Sawtooth Drill Bits - Set of 6

Key Features

  • Lifetime Warranty
    If any bit fails due to a material or manufacturing defect it will be replaced free of charge
  • Made from a Special Grade of High Carbon Steel
    Extremely hard wearing and retains its hardness over prolonged use
  • Teeth Have a Skewed Geometry
    Ensures minimal fibre pull and tearing of the wood
  • Bits Will Not Deform Under Heat
    Always keep the same cutting geometry, over their lifetime
  • Rim of the Bit is a Fraction of a Millimetre Higher than the Chippers
    Results in bit entering the wood cleanly, prior to the chippers clearing the wood
  • Double-Chip Channels
    Swarf is quickly cleared, minimising rim heat, allowing for clean cut, flat bottom holes in hard, soft and exotic woods
  • Bits are Back Tapered from the Cutting Edge
    Reduces friction and prevents binding

Show more +

Bundles

Total: £74.98
This Item: Premium Forstner Sawtooth Drill Bits - Set of 6
£39.99

Product Details

This premium fortsner sawtooth set includes 10, 15, 20, 25, 30, 35mm diameter bits, each with an overall length of 90mm and a 10mm round shank. These forstner sawtooth bits are made from a special grade of high carbon steel which is extremely hard wearing and retains its hardness over prolonged use, resulting in a bit that will not deform under heat and which will always keep the same cutting geometry, over its lifetime.

The rim of the forstner bit is a fraction of a millimetre higher than the chippers which results in the bit entering the wood cleanly, prior to the chippers clearing the wood. The double-chip channels means swarf is quickly cleared, minimising rim heat, allowing for clean cut, flat bottom holes in hard, soft and exotic woods. The teeth have a skewed geometry to ensure minimal fibre pull and tearing of the wood. The bits are back tapered from the cutting edge to reduce friction and prevent binding and have been fully ground to give precise concentricity to ensure a highly accurate hole. These bits are primarily used in a drill press or the tailstock of a lathe when boring end grain.

These premium forstner sawtooth bits give an exceptional drilling performance and come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. Our choice in forstner bits sets for the discerning woodworker and woodturner. ©
This premium fortsner sawtooth set includes 10, 15, 20, 25, 30, 35mm diameter bits, each with an overall length of 90mm and a 10mm round shank. These forstner sawtooth bits are made from a special grade of high carbon steel which is extremely hard wearing and retains its hardness over prolonged use, resulting in a bit that will not deform under heat and which will always keep the same cutting geometry, over its lifetime.

The rim of the forstner bit is a fraction of a millimetre higher than the chippers which results in the bit entering the wood cleanly, prior to the chippers clearing the wood. The double-chip channels means swarf is quickly cleared, minimising rim heat, allowing for clean cut, flat bottom holes in hard, soft and exotic woods. The teeth have a skewed geometry to ensure minimal fibre pull and tearing of the wood. The bits are back tapered from the cutting edge to reduce friction and prevent binding and have been fully ground to give precise concentricity to ensure a highly accurate hole. These bits are primarily used in a drill press or the tailstock of a lathe when boring end grain.

These premium forstner sawtooth bits give an exceptional drilling performance and come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. Our choice in forstner bits sets for the discerning woodworker and woodturner. ©

Show more +

Specifications

Brand Rutlands®
Material High Carbon Steel
Shank Type Round
Shank Diameter 10mm
Overall Length 90mm
Bit Diameters 10, 15, 20, 25, 30, 35mm

Show more +
4.933 15 5

Customer Reviews

Reviews (15)
Write Review....

Edward Wilkinson

Really pleased with these bits - needed a set like this for some time - impressed by low cost and high quality finish on the holes produced. A really excellent buy. Thank you Rutlands

Lawrie Thurston

These are just what I was looking for. Quality bits that produce perfect holes

Anthony Roberts

Good quality bits nice clean cut well impressed with them

Samuel Eldridge

I have a couple of sets already and the are the best of them.

Jonathan Moore

Ok , So I bought a set of Forstner type bits from the centre aisle of our local German supermarket for less than £10. I tried one on a 1/2inch thick piece of Oak and it did go through, but mainly by burning its way. Not good. It was only when I seen this set warranted for life, that I thought I'd try out Rutland's own brand. What a difference! They cut through hard or softwood with great accuracy and although I haven't needed them for a job yet, I'm really glad I have them... Ready for the day!

Andrew Alderman

Great set of Forstner bits, very sharp and cut clean. Great price too.

Haydn Cook

Excellent quality product well engineered to precision ideal hole and counter sinking tool cuts superbly well designed great for the job.

James Maclean

A really good set of standard sizes and at a reasonable price hope they last as good forstners are getting pricey.

John Brown

The 3 saw tooth bits cut perfect holes,the 3 smaller bits are not quite as clean a cut.
Still ,great value for the price..

John Beaumont

Nice quality bits but be aware that only the three largest bits are sawtooth pattern. The three smaller bits are standard Forstner bits hence 4 stars.

Tony Baker

A nicely presented set of the common sizes . These saw toothed Forstner drill bits are ideal for wood turning as they work really well in end grain leaving a clean finish. These bits were ordered on line and I received confirmation of dispatch of them within 2 hours. Standard delivery meant they arrive first post the following day. the quality of these bits shines out and straight out of the box the cut did not disappoint.
For the price a good value premium product.

John Bowen

very impressed this is the first quality set i have owned. they cut so much easier and create a much cleaner hole

David K.

I have been working with Forstner bits for years now but came to my senses and bought these saw-tooth bits which deal with end grain with great ease. Good product and good performance!

Mike Stone

I recently purchased this set of forstner bits and have had little chance to fully use them, however I have examined them closely and find that the quality is excellent and should last a long time. They do cut end grain wood very well.

Mikel Sanderson

Top, top quality forstner bits! I haven't used all sizes but the ones I have are definitely amazing, they cut through oak like a hot knife through butter. Absolutely no burning of the wood, even when using at slightly higher speeds.

Show more +

Premium Forstner Sawtooth Drill Bits - Set of 6

Rutlands®
Part No. R4077
£39.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £15.99
  • Saturday Next Day UK - £19.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >