Plug and Tenon Cutters with Forstner Bits - Set of 4
£119.99
inc. vat
Home > Drilling > Drill Bits > Plug & Tenon Cutters > Plug & Tenon Cutter Sets > Plug and Tenon Cutters with Forstner Bits - Set of 4
Key Features
- Lifetime Warranty
If any bit fails due to a material or manufacturing defect it will be replaced free of charge - Contains Four Plug & Tenon Cutters and Four Perfectly Matching Forstner Bits
Drill flawless holes and produce matching tenons and plugs in both hard and softwoods - Rim of the Plug Cutter Finely Scores the Inner Circumference of the Hole
Prior to five razor sharp cutting spurs removing the stock - Rim of the Forstner Bit is a Fraction of a Millimetre Higher than the Chippers
Results in bit entering the wood cleanly, prior to the chippers clearing the wood - Minimal Fibre Pull and Tearing of the Wood
Leaving extremely clean holes and plugs - Bits and Cutters are Back Tapered from the Cutting Edge
To reduce friction and prevent binding
Bundles
This Item: Plug and Tenon Cutters with Forstner Bits - Set of 4
£119.99
Product Details
This set contains four premium plug & tenon cutters and four perfectly matching premium forstner bits in 15, 20, 25 and 30mm. Designed for use in a drill press, they will drill flawless holes and produce matching tenons and plugs in both hard and softwoods.
The plug and tenon cutters are manufactured from a special grade of high carbon steel which is extremely hard wearing and retains its hardness over prolonged use, resulting in a cutter that will not deform under heat and which will always keep the same cutting geometry, over its lifetime. The rim of the cutter finely scores the inner circumference of the hole, prior to five razor sharp cutting spurs removing the stock. This results in minimal fibre pull and tearing of the wood leaving extremely clean holes and plugs. They have an overall length of 140mm with a total available depth of cut of 80mm and 13mm round shanks
The forstner sawtooth bits are made from a special grade of high carbon steel which is extremely hard wearing and retains its hardness over prolonged use. The rim of the forstner bit is a fraction of a millimetre higher than the chippers which results in the bit entering the wood cleanly, prior to the chippers clearing the wood. The double-chip channels means swarf is quickly cleared, minimising rim heat, allowing for clean cut, flat bottom holes in hard, soft and exotic woods. The teeth have a skewed geometry to ensure minimal fibre pull and tearing of the wood. The bits are back tapered from the cutting edge to reduce friction and prevent binding and have been fully ground to give precise concentricity to ensure a highly accurate hole. The bits have an overall length of 90mm, with 10mm round shanks
Supplied in a wood box this is a premium set of matching plug cutters and forstner bits for professional use with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. ©
The plug and tenon cutters are manufactured from a special grade of high carbon steel which is extremely hard wearing and retains its hardness over prolonged use, resulting in a cutter that will not deform under heat and which will always keep the same cutting geometry, over its lifetime. The rim of the cutter finely scores the inner circumference of the hole, prior to five razor sharp cutting spurs removing the stock. This results in minimal fibre pull and tearing of the wood leaving extremely clean holes and plugs. They have an overall length of 140mm with a total available depth of cut of 80mm and 13mm round shanks
The forstner sawtooth bits are made from a special grade of high carbon steel which is extremely hard wearing and retains its hardness over prolonged use. The rim of the forstner bit is a fraction of a millimetre higher than the chippers which results in the bit entering the wood cleanly, prior to the chippers clearing the wood. The double-chip channels means swarf is quickly cleared, minimising rim heat, allowing for clean cut, flat bottom holes in hard, soft and exotic woods. The teeth have a skewed geometry to ensure minimal fibre pull and tearing of the wood. The bits are back tapered from the cutting edge to reduce friction and prevent binding and have been fully ground to give precise concentricity to ensure a highly accurate hole. The bits have an overall length of 90mm, with 10mm round shanks
Supplied in a wood box this is a premium set of matching plug cutters and forstner bits for professional use with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. ©
This set contains four premium plug & tenon cutters and four perfectly matching premium forstner bits in 15, 20, 25 and 30mm. Designed for use in a drill press, they will drill flawless holes and produce matching tenons and plugs in both hard and softwoods.
The plug and tenon cutters are manufactured from a special grade of high carbon steel which is extremely hard wearing and retains its hardness over prolonged use, resulting in a cutter that will not deform under heat and which will always keep the same cutting geometry, over its lifetime. The rim of the cutter finely scores the inner circumference of the hole, prior to five razor sharp cutting spurs removing the stock. This results in minimal fibre pull and tearing of the wood leaving extremely clean holes and plugs. They have an overall length of 140mm with a total available depth of cut of 80mm and 13mm round shanks
The forstner sawtooth bits are made from a special grade of high carbon steel which is extremely hard wearing and retains its hardness over prolonged use. The rim of the forstner bit is a fraction of a millimetre higher than the chippers which results in the bit entering the wood cleanly, prior to the chippers clearing the wood. The double-chip channels means swarf is quickly cleared, minimising rim heat, allowing for clean cut, flat bottom holes in hard, soft and exotic woods. The teeth have a skewed geometry to ensure minimal fibre pull and tearing of the wood. The bits are back tapered from the cutting edge to reduce friction and prevent binding and have been fully ground to give precise concentricity to ensure a highly accurate hole. The bits have an overall length of 90mm, with 10mm round shanks
Supplied in a wood box this is a premium set of matching plug cutters and forstner bits for professional use with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. ©
The plug and tenon cutters are manufactured from a special grade of high carbon steel which is extremely hard wearing and retains its hardness over prolonged use, resulting in a cutter that will not deform under heat and which will always keep the same cutting geometry, over its lifetime. The rim of the cutter finely scores the inner circumference of the hole, prior to five razor sharp cutting spurs removing the stock. This results in minimal fibre pull and tearing of the wood leaving extremely clean holes and plugs. They have an overall length of 140mm with a total available depth of cut of 80mm and 13mm round shanks
The forstner sawtooth bits are made from a special grade of high carbon steel which is extremely hard wearing and retains its hardness over prolonged use. The rim of the forstner bit is a fraction of a millimetre higher than the chippers which results in the bit entering the wood cleanly, prior to the chippers clearing the wood. The double-chip channels means swarf is quickly cleared, minimising rim heat, allowing for clean cut, flat bottom holes in hard, soft and exotic woods. The teeth have a skewed geometry to ensure minimal fibre pull and tearing of the wood. The bits are back tapered from the cutting edge to reduce friction and prevent binding and have been fully ground to give precise concentricity to ensure a highly accurate hole. The bits have an overall length of 90mm, with 10mm round shanks
Supplied in a wood box this is a premium set of matching plug cutters and forstner bits for professional use with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. ©
Show more +
Specifications
Brand
Rutlands®
Forstner Bit Material
High Carbon Steel
Forstner Bit Shank Type
Round
Forstner Bit Shank Diameter
10mm
Forstner Bit Overall Length
90mm
Plug Cutter Material
High Carbon Steel
Plug Cutter Shank Type
Round
Plug Cutter Shank Diameter
13mm
Plug Cutter Overall Length
140mm
Plug Cutter Max Depth of Cut
80mm
Show more +
5.000
5
5
Customer Reviews
Reviews (5)
Write Review....
Neil Jones
fantastic set of plug cutters bought 2 sets one for me and one for my father in law they have prefomed well above our expectations the cutters have not blunted at all and have been used in all types of hardwood and supplied in a wooden case looks like rutlands have delivered again !!! well done
Michael Boyles
Quality cutters, delivered promptly, which perform very well.
Michael Lines
Perfectly matching plugs cutters and forstner bits
David Trott
These ooze quality and the plugs are an absolute perfect match for the holes made with the forstners.
Arthur W
A cracking set of bits more than happy with the joints they cut. The neat wood storage case is a nice little bonus as well.
Show more +
£119.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process