Twist Bit
£1.99
inc. vat
Key Features
- Lifetime Warranty
If any bit fails due to a material or manufacturing defect it will be replaced free of charge - The Finest Drill Bits That We Have Ever Offered
M2 high speed steel twist bits - Split Point and 135° Drill Point Angle
For good centering properties and to ensure the bit will not wander - Little Pressure Required
To cut very quickly through your stock - Deep Flutes
Allow fast chip clearance - Hardened and Tempered
To ensure resistance to deformation and to reduce brittleness - Hardened M2 HSS
Bit will not deform and will always keep the same cutting geometry - Certified to DIN 338
To ensure the dimensional accuracy of the hole
Product Details
These premium twist drill bits can be used in a drill press or electric hand drill and are designed to be used on alloyed and non alloyed steel, non ferrous metal, cast iron and hard plastics. The bits have been fully ground to give precise concentricity to ensure a highly accurate hole. They have a split point and 135° drill point angle which gives the bit good centering properties meaning the bit will not wander as you start to drill. The split point and optimum drill point angle also mean little pressure is required to cut very quickly through your stock. The deep flutes allow fast chip clearance, even when drilling through thicker stock.
The drill bits are made from M2 high speed steel which is extremely hard wearing and retains hardness over prolonged use, even when heated. The material is perfect for metal drilling applications where the drill bit will naturally heat during use, the heat generated will not deform the bit and it will always keep the same cutting geometry over its lifetime. The drill bits are hardened to ensure they are highly resistant to deformation and tempered to reduce brittleness and increase ductility and toughness.
The twist bits are certified to ensure the dimensional accuracy of the hole. Available in a range of sizes from 1mm to 13mm, these bits were chosen due to their superior cutting performance and durability. The bits have a high anti torsion capability and a low danger of fracture, they come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. ©
The drill bits are made from M2 high speed steel which is extremely hard wearing and retains hardness over prolonged use, even when heated. The material is perfect for metal drilling applications where the drill bit will naturally heat during use, the heat generated will not deform the bit and it will always keep the same cutting geometry over its lifetime. The drill bits are hardened to ensure they are highly resistant to deformation and tempered to reduce brittleness and increase ductility and toughness.
The twist bits are certified to ensure the dimensional accuracy of the hole. Available in a range of sizes from 1mm to 13mm, these bits were chosen due to their superior cutting performance and durability. The bits have a high anti torsion capability and a low danger of fracture, they come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. ©
These premium twist drill bits can be used in a drill press or electric hand drill and are designed to be used on alloyed and non alloyed steel, non ferrous metal, cast iron and hard plastics. The bits have been fully ground to give precise concentricity to ensure a highly accurate hole. They have a split point and 135° drill point angle which gives the bit good centering properties meaning the bit will not wander as you start to drill. The split point and optimum drill point angle also mean little pressure is required to cut very quickly through your stock. The deep flutes allow fast chip clearance, even when drilling through thicker stock.
The drill bits are made from M2 high speed steel which is extremely hard wearing and retains hardness over prolonged use, even when heated. The material is perfect for metal drilling applications where the drill bit will naturally heat during use, the heat generated will not deform the bit and it will always keep the same cutting geometry over its lifetime. The drill bits are hardened to ensure they are highly resistant to deformation and tempered to reduce brittleness and increase ductility and toughness.
The twist bits are certified to ensure the dimensional accuracy of the hole. Available in a range of sizes from 1mm to 13mm, these bits were chosen due to their superior cutting performance and durability. The bits have a high anti torsion capability and a low danger of fracture, they come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. ©
The drill bits are made from M2 high speed steel which is extremely hard wearing and retains hardness over prolonged use, even when heated. The material is perfect for metal drilling applications where the drill bit will naturally heat during use, the heat generated will not deform the bit and it will always keep the same cutting geometry over its lifetime. The drill bits are hardened to ensure they are highly resistant to deformation and tempered to reduce brittleness and increase ductility and toughness.
The twist bits are certified to ensure the dimensional accuracy of the hole. Available in a range of sizes from 1mm to 13mm, these bits were chosen due to their superior cutting performance and durability. The bits have a high anti torsion capability and a low danger of fracture, they come with a lifetime warranty - if any bit fails due to a material or manufacturing defect it will be replaced free of charge. ©
Show more +
Specifications
Brand
Rutlands®
Material
M2 High Speed Steel
Shank Type
Round
Shank Diameter
1mm - 13mm
Overall Length
34mm - 151mm
Show more +
0
5
Customer Reviews
Reviews (0)
Write Review....
Twist Bit - 1mm
Twist Bit - 2mm
Twist Bit - 3mm
Twist Bit - 4mm
Twist Bit - 5mm
Twist Bit - 6mm
Twist Bit - 7mm
Twist Bit - 8mm
Twist Bit - 9mm
Twist Bit - 10mm
Twist Bit - 11mm
Twist Bit - 12mm
Twist Bit - 13mm
£1.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process