Flexible Bit Holder
£19.99
inc. vat
Home > Drilling > Drill Guides, Stops & Bit Holders > Bit Holders > Flexible Bit Holders > Flexible Bit Holder
Key Features
- Lifetime Warranty
If any bit holder fails due to a material or manufacturing defect it will be replaced free of charge - 300mm Flexible Shaft
Bend and reach when working in confined spaces - Highly Versatile
Can be used in both forward and reverse drive - Industry Standard
1/4" hex shank and 1/4" hex quick change chuck - Articulated Metal Sheath
Allows any heat build up to dissipate quickly preventing damage to the shaft - Flex Up to 90°
To reach where you need to
Bundles
Product Details
It is not always possible to get a drill driver or screwdriver where you need it to be or even at the correct angle you want to use it. Driving screws in tight spaces or close to sides of cabinets can be a major problem. Designed for use with a drill driver, this 300mm flexible shaft will bend and reach right where you need it to. It is highly versatile and can be used in both forward and reverse drive.
At one end is an industry standard 1/4" hex shank which will fit into any 1/4" quick change chuck, or suitably sized keyed or keyless drill chuck. At the other end is a 1/4" quick change chuck that will accept all 1/4" hex shank screwdriver and drill bits. Simply pull down on the aluminium sleeve, place your bit into the chuck and release to lock into place. The rotating shaft is housed in an articulated metal sheath which allows any heat build up to dissipate quickly preventing damage to the shaft through overheating.
The flexible screwdriver bit holder gives 300mm of extension and can be flexed up to 90°. It comes with a lifetime warranty - if any bit holder fails due to a material or manufacturing defect it will be replaced free of charge. ©
At one end is an industry standard 1/4" hex shank which will fit into any 1/4" quick change chuck, or suitably sized keyed or keyless drill chuck. At the other end is a 1/4" quick change chuck that will accept all 1/4" hex shank screwdriver and drill bits. Simply pull down on the aluminium sleeve, place your bit into the chuck and release to lock into place. The rotating shaft is housed in an articulated metal sheath which allows any heat build up to dissipate quickly preventing damage to the shaft through overheating.
The flexible screwdriver bit holder gives 300mm of extension and can be flexed up to 90°. It comes with a lifetime warranty - if any bit holder fails due to a material or manufacturing defect it will be replaced free of charge. ©
It is not always possible to get a drill driver or screwdriver where you need it to be or even at the correct angle you want to use it. Driving screws in tight spaces or close to sides of cabinets can be a major problem. Designed for use with a drill driver, this 300mm flexible shaft will bend and reach right where you need it to. It is highly versatile and can be used in both forward and reverse drive.
At one end is an industry standard 1/4" hex shank which will fit into any 1/4" quick change chuck, or suitably sized keyed or keyless drill chuck. At the other end is a 1/4" quick change chuck that will accept all 1/4" hex shank screwdriver and drill bits. Simply pull down on the aluminium sleeve, place your bit into the chuck and release to lock into place. The rotating shaft is housed in an articulated metal sheath which allows any heat build up to dissipate quickly preventing damage to the shaft through overheating.
The flexible screwdriver bit holder gives 300mm of extension and can be flexed up to 90°. It comes with a lifetime warranty - if any bit holder fails due to a material or manufacturing defect it will be replaced free of charge. ©
At one end is an industry standard 1/4" hex shank which will fit into any 1/4" quick change chuck, or suitably sized keyed or keyless drill chuck. At the other end is a 1/4" quick change chuck that will accept all 1/4" hex shank screwdriver and drill bits. Simply pull down on the aluminium sleeve, place your bit into the chuck and release to lock into place. The rotating shaft is housed in an articulated metal sheath which allows any heat build up to dissipate quickly preventing damage to the shaft through overheating.
The flexible screwdriver bit holder gives 300mm of extension and can be flexed up to 90°. It comes with a lifetime warranty - if any bit holder fails due to a material or manufacturing defect it will be replaced free of charge. ©
Show more +
Specifications
Brand
Rutlands®
Flexishaft Length
300mm
Chuck
1/4"
Hex Shank
1/4"
Show more +
5.000
3
5
Customer Reviews
Reviews (3)
Write Review....
Stephen P
Dale Harding
This is a great flexible bit holder at a great price. Feels quality and should last me out.
Michelle Crump
Great little tool, I use mine repeatedly when installing hardware inside kitchen cabinets. Really well made and comparable to a top quality Japanese made one I purchased years ago.
Show more +
£19.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process
It will bend 90 degrees and is very robust - my spade bit jammed a couple of times and the flexible drive wound up before I could release the trigger on the drill but no harm done.
I won't need it every day but when the situation demands, it will be a godsend.