Wall-Mount Fine Filter Dust Collector with 6m Stretch Hose
£479.99
inc. vat
Home > Dust Collection > Dust Collectors > Wall-Mount Dust Collectors > Wall-Mount Fine Filter Dust Collectors > Wall-Mount Fine Filter Dust Collector with 6m Stretch Hose
Key Features
- 3 Year Warranty
In the event of a failure due to a material or manufacturing defect the dust collector or component will be replaced free of charge - Pleated Canister Filter
Traps particles as small as 1 micron, preventing them from re-entering the workshop - Easy Clean Canister Filter
Turn the crank handle to knock the dust off the walls of the loaded canister - Powerful 750w Induction Motor
Dust collector can be connected to a stand-alone machine or connected to a 100mm dust system - Premium Fine Filter Wall-mounted Dust Collector
Save on valuable workshop floor space and make emptying of bags easier and faster - Low Level Of Noise At 87 dB
Similar to that of a woodturning lathe, for a quiet workshop - Impressive Air Flow Of 750 m3/h
Handles the waste produced by sanders, circular saws, bandsaws, spindle moulders, router tables, planers and woodturning lathes - Impellor Made From Steel
Works with large chippings, coarse and fine dust - Extra Large Collection Bag
80 litres, tear resistant and clear - NVR Switch Positioned On Front Face Of Motor
Quick and easy access to switch the motor off in the event of a hose blockage
Bundles
This Item: Wall-Mount Fine Filter Dust Collector with 6m Stretch Hose
£479.99
Product Details
This premium wall-mounted fine filter dust collector features a pleated canister filter, which traps particles as small as 1 micron, preventing fine dust from re-entering the workshop. You do not even have to open the cannister to unclog it, you simply turn a crank handle, which spins a flap, knocking the dust off the walls of the loaded canister filter. Waste is collected in the 80 litre tear resistant clear collection bag. Wall-mounted dust collectors have become extremely popular over the past few years, as they save on valuable workshop floor space and make emptying of the collection bag far easier and faster. This powerful dust collector can be connected to a stand-alone machine or can be connected to a 100mm dust system.
The 750w induction motor produces a low level of noise at 87 dB, similar to that of a woodturning lathe, whilst generating an impressive air flow of 750 m3/h using the pleated cannister filter. This airflow is a measurement of average air flow rather than a peak air flow, that other manufacturers may detail. The 100mm inlet diameter combined with the airflow is more than sufficient to handle the majority of waste produced in the workshop by sanders, circular saws, bandsaws, spindle moulders, router tables, planers and woodturning lathes. The main body of the dust collector is made from heavy gauge sheet steel and all of the welds are smoothly finished to prevent sharp edges. The impellor is made from steel to handle large chippings in addition to coarse and fine dust.
The NVR switch is conveniently positioned on the front face of the motor for quick and easy access if you need to switch the motor off in the event of a hose blockage. The wall mount bracket should be located a minimum of 1.6m from the workshop floor to allow for the collection bag to hang free.
This model is supplied with a 1 metre to 6 metre premium stretch clear dust hose (Part No R8502) , pleated filter canister with crank handle, clear collection bag, wall mount bracket, dust hose clip and a fleece collection bag (if you wish to use without the pleated canister). This premium wall-mount fine filter dust collector has a 3 year warranty and in the event that it fails due to a material or manufacturing defect the dust collector or component will be replaced free of charge.
The 750w induction motor produces a low level of noise at 87 dB, similar to that of a woodturning lathe, whilst generating an impressive air flow of 750 m3/h using the pleated cannister filter. This airflow is a measurement of average air flow rather than a peak air flow, that other manufacturers may detail. The 100mm inlet diameter combined with the airflow is more than sufficient to handle the majority of waste produced in the workshop by sanders, circular saws, bandsaws, spindle moulders, router tables, planers and woodturning lathes. The main body of the dust collector is made from heavy gauge sheet steel and all of the welds are smoothly finished to prevent sharp edges. The impellor is made from steel to handle large chippings in addition to coarse and fine dust.
The NVR switch is conveniently positioned on the front face of the motor for quick and easy access if you need to switch the motor off in the event of a hose blockage. The wall mount bracket should be located a minimum of 1.6m from the workshop floor to allow for the collection bag to hang free.
This model is supplied with a 1 metre to 6 metre premium stretch clear dust hose (Part No R8502) , pleated filter canister with crank handle, clear collection bag, wall mount bracket, dust hose clip and a fleece collection bag (if you wish to use without the pleated canister). This premium wall-mount fine filter dust collector has a 3 year warranty and in the event that it fails due to a material or manufacturing defect the dust collector or component will be replaced free of charge.
This premium wall-mounted fine filter dust collector features a pleated canister filter, which traps particles as small as 1 micron, preventing fine dust from re-entering the workshop. You do not even have to open the cannister to unclog it, you simply turn a crank handle, which spins a flap, knocking the dust off the walls of the loaded canister filter. Waste is collected in the 80 litre tear resistant clear collection bag. Wall-mounted dust collectors have become extremely popular over the past few years, as they save on valuable workshop floor space and make emptying of the collection bag far easier and faster. This powerful dust collector can be connected to a stand-alone machine or can be connected to a 100mm dust system.
The 750w induction motor produces a low level of noise at 87 dB, similar to that of a woodturning lathe, whilst generating an impressive air flow of 750 m3/h using the pleated cannister filter. This airflow is a measurement of average air flow rather than a peak air flow, that other manufacturers may detail. The 100mm inlet diameter combined with the airflow is more than sufficient to handle the majority of waste produced in the workshop by sanders, circular saws, bandsaws, spindle moulders, router tables, planers and woodturning lathes. The main body of the dust collector is made from heavy gauge sheet steel and all of the welds are smoothly finished to prevent sharp edges. The impellor is made from steel to handle large chippings in addition to coarse and fine dust.
The NVR switch is conveniently positioned on the front face of the motor for quick and easy access if you need to switch the motor off in the event of a hose blockage. The wall mount bracket should be located a minimum of 1.6m from the workshop floor to allow for the collection bag to hang free.
This model is supplied with a 1 metre to 6 metre premium stretch clear dust hose (Part No R8502) , pleated filter canister with crank handle, clear collection bag, wall mount bracket, dust hose clip and a fleece collection bag (if you wish to use without the pleated canister). This premium wall-mount fine filter dust collector has a 3 year warranty and in the event that it fails due to a material or manufacturing defect the dust collector or component will be replaced free of charge.
The 750w induction motor produces a low level of noise at 87 dB, similar to that of a woodturning lathe, whilst generating an impressive air flow of 750 m3/h using the pleated cannister filter. This airflow is a measurement of average air flow rather than a peak air flow, that other manufacturers may detail. The 100mm inlet diameter combined with the airflow is more than sufficient to handle the majority of waste produced in the workshop by sanders, circular saws, bandsaws, spindle moulders, router tables, planers and woodturning lathes. The main body of the dust collector is made from heavy gauge sheet steel and all of the welds are smoothly finished to prevent sharp edges. The impellor is made from steel to handle large chippings in addition to coarse and fine dust.
The NVR switch is conveniently positioned on the front face of the motor for quick and easy access if you need to switch the motor off in the event of a hose blockage. The wall mount bracket should be located a minimum of 1.6m from the workshop floor to allow for the collection bag to hang free.
This model is supplied with a 1 metre to 6 metre premium stretch clear dust hose (Part No R8502) , pleated filter canister with crank handle, clear collection bag, wall mount bracket, dust hose clip and a fleece collection bag (if you wish to use without the pleated canister). This premium wall-mount fine filter dust collector has a 3 year warranty and in the event that it fails due to a material or manufacturing defect the dust collector or component will be replaced free of charge.
Show more +
Specifications
Brand
Rutlands®
Power
750w
Voltage
230v
Air Flow
750m3/h
Bag Capacity
80 Litre
Filter Performance
100% > 1 Micron
Filter Dimension
Dia 340mm x 400mm
Hose Diameter
102mm
Weight
25kg
Overall L x H x W
1586 x 450 x 455mm
Sound Level
87 dB
Show more +
5.000
6
5
Customer Reviews
Reviews (6)
Write Review....
Phil Lancaster
Anthony Moore
A good quality and essential piece of equipment for any serious woodworker. I find it far quieter than my previous slave extractor and with more suction. My only reservation is the instructions could be better.
Aiden Mills
A really high quality bit of kit with every little detail obviously considered. Particularly impressed with crank handle to clean the filter, a very clever design & having used dust collectors in the past I know how much of a pain the filters can be to maintain. On/off switch is easy reachable (although I might hook it up to a remote switch) and the whole thing looks very professional hanging up in my workshop. Now time to make some dust!
Duncan Portillo
Delighted with my new extractor. Really quiet and excellent suction power. The fine filter works well at containing the fine dust. Suction drops slightly after heavy use but then you simply rotate the crank handle to brush off the fine dust from the inner walls of the filter. I have wall mounted the extractor centrally in the shop and created a hose system to independently connect to my table saw, planer thicknesser and bandsaw.
James Rogers
This has proved to be the ideal solution for collecting dust in my workshop. My shop is quite small so it frees up floor space and as it is mounted quite high you don't have dust hoses trailing on the floor and tripping you up. The bag is so much easier to remove and empty compared with my previous floor standing extractor. Really well made and finished and the motor is extremely quiet. Mainly use with my planer thicknesser which produces very fine dust that now gets trapped in the canister. I tend to rotate the filter cleaner handle every 15 to 20 minutes to keep the suction level at its peak. My machines are no more than 2 metres from the extractor and suction has been more than adequate. Great machine and far less dust in the atmosphere than when i use my old needle felt bag extractor.
Arthur Blower
This wall mounted dust collector is very quiet and powerful and a huge improvement from the twin bag floor standing extractor that I previously used for dust collection. At 25kg it is a substantial piece of kit, so you need to mount on a solid wall and a friend to help you lift onto the hanging bracket. It frees up floor space which is essential in my small shop. The filter works really well, stopping the small particles re-entering to the shop. When the sun shines you can see the reduction in dust particles floating in the air.
Show more +
£479.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process
It is simple to install and has a decent length mains cable.
It is quiet and effective and being wall mounted it helps make the most of the limited space in my small workshop.
Changing the bag when full is very easy and clearing the filter to maintain airflow while keeping harmful fine dust out of the workshop could not be more simple!
I added the Rutlands' 63mm stretch hose so can hook up each machine in the workshop with ease!