Dust Hose Stepped Adaptor - 100mm to 63mm to 32mm
£9.99
inc. vat
Home > Dust Collection > Dust Hoses & Fittings > Dust Hose Adaptors > Dust Hose Stepped Adaptor - 100mm to 63mm to 32mm
Key Features
- Lifetime Warranty
If any hose fitting fails due to a material or manufacturing defect it will be replaced free of charge - Industry Standard Hose Fitting
Connects to 100mm and 63mm and 32mm dust hose - Impact Resistant Hose Fitting
Made from a thermoplastic polymer - Fitting will not Flex or Distort Under Pressure
Structural strength and stiffness - Excellent Low Temperature Properties
Will perform in extremely cold workshops down to -40°C
Bundles
This Item: Dust Hose Stepped Adaptor - 100mm to 63mm to 32mm
£9.99
Product Details
This fitting has an 105mm to 100mm internal taper that press fits on to 100mm machine dust ports. The fitting then steps down to accept a 63mm dust hose and then further steps down to 38mm to accept power tool dust hose.
This hose fitting is made from a thermoplastic polymer, which is impact resistant, has structural strength and stiffness and will not flex or distort under pressure. It has excellent low temperature properties and will perform in extremely cold workshops down to -40°C. The internal bore is smooth to ensure the smooth passage of dust. As all of our fittings are made to exacting and tight tolerances to prevent air loss, a top tip is to use a washing up liquid as a lubricant when initially installing. ©
This hose fitting is made from a thermoplastic polymer, which is impact resistant, has structural strength and stiffness and will not flex or distort under pressure. It has excellent low temperature properties and will perform in extremely cold workshops down to -40°C. The internal bore is smooth to ensure the smooth passage of dust. As all of our fittings are made to exacting and tight tolerances to prevent air loss, a top tip is to use a washing up liquid as a lubricant when initially installing. ©
This fitting has an 105mm to 100mm internal taper that press fits on to 100mm machine dust ports. The fitting then steps down to accept a 63mm dust hose and then further steps down to 38mm to accept power tool dust hose.
This hose fitting is made from a thermoplastic polymer, which is impact resistant, has structural strength and stiffness and will not flex or distort under pressure. It has excellent low temperature properties and will perform in extremely cold workshops down to -40°C. The internal bore is smooth to ensure the smooth passage of dust. As all of our fittings are made to exacting and tight tolerances to prevent air loss, a top tip is to use a washing up liquid as a lubricant when initially installing. ©
This hose fitting is made from a thermoplastic polymer, which is impact resistant, has structural strength and stiffness and will not flex or distort under pressure. It has excellent low temperature properties and will perform in extremely cold workshops down to -40°C. The internal bore is smooth to ensure the smooth passage of dust. As all of our fittings are made to exacting and tight tolerances to prevent air loss, a top tip is to use a washing up liquid as a lubricant when initially installing. ©
Show more +
Specifications
Brand
Rutlands®
Internal Taper
105mm to 100mm
Outside Diameter 1
63mm
Outside Diameter 2
38mm
Show more +
5.000
4
5
Customer Reviews
Reviews (4)
Write Review....
Boots
Well made. Great for connecting tools direct to my cyclone, specially planes, and routers. No need for extra pipes.
Boots
I'm making a cyclone dust collector. Because I tend to work in different areas having bulky hose's is not practical, adding these means I can use standard 35mm hoses which fit perfectly. Planing, or routing just fills my extractor if used directly, a cyclone saves the strain on dust bags, and filters, so saves money, and is environmentally a good option. If you think how much off the shelf systems cost, for a little effort, this is an effective flexible solution. One glove can fit all.
Ian B
We used the larger part of these to go over the hose port on the unequal 100mm blast gate (the side that is designed to accept a 100mm hose), and then fitted a 63mm dia spiral hose onto the other side, with a clamp.
A good fit on both sides. Not found a use for the smaller piece yet but may come in handy one day!
A good fit on both sides. Not found a use for the smaller piece yet but may come in handy one day!
Christopher Goode
The is a workshop must have! Great quality for the price. Very useful that it splits in two easily which is really useful when going from small machinery down to hand tool extraction size. Really impressed and will be purchasing a few more!
Show more +
£9.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process