100mm Cyclone Dust Collector Kit
100mm Cyclone Dust Collector Kit
£24.99
inc. vat
Home > Dust Collection > Dust Separators > Dust Separator Kits > 100mm Cyclone Dust Collector Kit

Key Features

  • Create a cyclone dust collector from a bucket, barrel, box, or any other large container
  • Designed to work with 100mm flexible dust collection hoses
  • Simply place the supplied template on your container lid and cut out the holes for the dust ports
  • Capture 95% of dust and debris before it reaches your vacuum or dust collector
  • The larger debris falls to the bottom of your container and will not fill up your collection bags
  • Eliminates the need to repeatedly change bags and protects your filter
  • The finer dust is then left to be captured by the dust collection bags
  • Ideal for use with router tables, planers and table saws
  • Kit contains: 2x 100mm ports, 1x 100mm infeed elbow, 1x 100mm outfeed elbow, 2x 100mm turn key hose clamps and 1x hardware pack

Show more +

Bundles

Total: £64.98inc. vat
This Item: 100mm Cyclone Dust Collector Kit
£24.99

Product Details

A cyclone dust collector is used to capture dust and debris before it enters the collection bag of your vacuum. This kit contains everything needed to create a cyclone collector from a large container such as a bucket, barrel, or box. The kit allows you to collect dust for longer periods of time without losing suction power. Loss of suction is caused by prematurely filling and clogging the filter on your vacuum, which this kit eliminates. The kit will allow you to collect 95% of dust and debris before it reaches your vacuum or dust collector. The larger debris falls to the bottom of the container which leaves the finer dust to be collected by the dust collection bags in your vacuum.

The kit is designed to work with 100mm flexible dust hoses and is supplied with all the necessary fixtures and hardware to turn any container into a perfect cyclone dust collector. There is a supplied template which is placed onto the lid of your container which shows you exactly where to cut out the holes for the dust ports and drill the holes for the hardware.

The kit contains the following: 2x 100mm ports, 1x 100mm infeed elbow, 1x 100mm outfeed elbow, 2x 100mm turn key hose clamps and 1x hardware pack. A container, 100mm flexible dust hose and suitable vacuum are all that is needed to create your own cyclone dust collector. The collector is ideal for use with router tables, planers and table saws but can be used all around the workshop.
A cyclone dust collector is used to capture dust and debris before it enters the collection bag of your vacuum. This kit contains everything needed to create a cyclone collector from a large container such as a bucket, barrel, or box. The kit allows you to collect dust for longer periods of time without losing suction power. Loss of suction is caused by prematurely filling and clogging the filter on your vacuum, which this kit eliminates. The kit will allow you to collect 95% of dust and debris before it reaches your vacuum or dust collector. The larger debris falls to the bottom of the container which leaves the finer dust to be collected by the dust collection bags in your vacuum.

The kit is designed to work with 100mm flexible dust hoses and is supplied with all the necessary fixtures and hardware to turn any container into a perfect cyclone dust collector. There is a supplied template which is placed onto the lid of your container which shows you exactly where to cut out the holes for the dust ports and drill the holes for the hardware.

The kit contains the following: 2x 100mm ports, 1x 100mm infeed elbow, 1x 100mm outfeed elbow, 2x 100mm turn key hose clamps and 1x hardware pack. A container, 100mm flexible dust hose and suitable vacuum are all that is needed to create your own cyclone dust collector. The collector is ideal for use with router tables, planers and table saws but can be used all around the workshop.

Show more +

Specifications

Brand Rutlands
Port Diameter 100mm

Show more +
5.000 4 5

Customer Reviews

Reviews (4)
Write Review....

Nick Rose

I have to admit to being a bit sceptical of this before I bought it, but the other reviewers convinced me to give it a go.
WOW I am so glad I did. Having read reviews of similar ones on other websites, they advised mounting the 'extractor' side pipe close to the centre of the bucket as possible and the 'inlet' pipe pointing in the opposite direction near the wall of the bucket. This worked really well and I have noticed very little, if any, drop in airflow and captures all but the finest dust in the bucket.
Really impressed by this kit and to say the whole dust collector including bucker cost about £45, well worth the money and I can highly recommend.

Stevan Quemby

Its not often I'm impressed with a product but these simple pipes were a breeze to use thanks to the template provided, all holes lined up perfectly onto my 120l blue barrel lid and sit nicely side by side linked up with ease with the provided fasteners and away and operational in 15minutes. They were just what i was looking for and saved having to mess around with guttering components, worth every penny.

Peter Wainwright

I was about to invest in Oneida dust deputy cyclone system when I saw this. The price of a 30 litre bucket with lid is £15 from a certain big superstore so I thought I would give this a try and if it worked I would save over £100. I am very impressed so far and would highly recommend. It does exactly what it says by trapping all the heavy dust in the bin and only the fine dust f=going to the vacuum. I am going to buy a 60 litre drum next and another kit for dedicated use with my planer.

Jon Carter

This gave a far better performance than I thought. I bought a 25 litre bucket with lid from my local garden superstore. I market the two 4" hole positions on the lid and then used a very sharp Stanley knife to cut out the holes. I bought and extra length of 4" hose from Rutlands and connected it all up to my Clarke dust vacuum. The heavy shavings fell straight into the bottom of the 25 litre bucket and the finer dust went through to the extractor. Works a treat and will save me lots of money on buying dust extractor bags. Very simple but very effective,

Show more +

100mm Cyclone Dust Collector Kit

Rutlands
Part No. DK7204
£24.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £14.99
  • Saturday Next Day UK - £14.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >