Dust Separator Kit
£29.99
inc. vat
Key Features
- Lifetime Warranty
If any fitting fails due to a material or manufacturing defect it will be replaced free of charge - Collect 95% of Dust and Debris Before it Reaches Your Vacuum/Extractor
Minimises the spend on expensive dust bags - Collect Dust for Longer Periods of Time
Without losing suction power - Significantly Reduces Clogged Filters
To maximise suction power - Industry Standard
Works with industry standard 102mm dust hoses
Bundles
This Item: Dust Separator Kit
£29.99
Product Details
The dust cyclone kit will allow you to collect 95% of dust and debris before it reaches your vacuum or dust collector. The larger debris falls to the bottom of the container which leaves the finer dust to be collected by the dust collection bags in your vacuum. This kit contains everything needed to create a cyclone collector from a large container such as a bucket, barrel, or box.
The kit allows you to collect dust for longer periods of time without losing suction power. Loss of suction is caused by prematurely filling and clogging the filter on your vacuum, which this kit eliminates. The kit is designed to work with industry standard 102mm outside diameter flexible dust hoses and is supplied with all the necessary fixtures and hardware to turn any container into a perfect cyclone dust collector. There is a supplied template which is placed onto the lid of your container which shows you exactly where to cut out the holes for the dust ports and drill the holes for the hardware.
The kit contains the following: 2x 100mm ports, 1x 100mm infeed elbow, 1x 100mm outfeed elbow, 2x 100mm butterfly key hose clamps and a hardware pack. A container, 100mm flexible dust hose and suitable vacuum are all that is needed to create your own cyclone dust collector. The collector is ideal for high volume dust generating power tools such as routers, planes, saws and sanders and will capture 95% of the dust before reaching your extractor, saving time and replacement bag cost. This kit comes with a lifetime warranty, where if any fitting fails due to a material or manufacturing defect it will be replaced free of charge. ©
The kit allows you to collect dust for longer periods of time without losing suction power. Loss of suction is caused by prematurely filling and clogging the filter on your vacuum, which this kit eliminates. The kit is designed to work with industry standard 102mm outside diameter flexible dust hoses and is supplied with all the necessary fixtures and hardware to turn any container into a perfect cyclone dust collector. There is a supplied template which is placed onto the lid of your container which shows you exactly where to cut out the holes for the dust ports and drill the holes for the hardware.
The kit contains the following: 2x 100mm ports, 1x 100mm infeed elbow, 1x 100mm outfeed elbow, 2x 100mm butterfly key hose clamps and a hardware pack. A container, 100mm flexible dust hose and suitable vacuum are all that is needed to create your own cyclone dust collector. The collector is ideal for high volume dust generating power tools such as routers, planes, saws and sanders and will capture 95% of the dust before reaching your extractor, saving time and replacement bag cost. This kit comes with a lifetime warranty, where if any fitting fails due to a material or manufacturing defect it will be replaced free of charge. ©
The dust cyclone kit will allow you to collect 95% of dust and debris before it reaches your vacuum or dust collector. The larger debris falls to the bottom of the container which leaves the finer dust to be collected by the dust collection bags in your vacuum. This kit contains everything needed to create a cyclone collector from a large container such as a bucket, barrel, or box.
The kit allows you to collect dust for longer periods of time without losing suction power. Loss of suction is caused by prematurely filling and clogging the filter on your vacuum, which this kit eliminates. The kit is designed to work with industry standard 102mm outside diameter flexible dust hoses and is supplied with all the necessary fixtures and hardware to turn any container into a perfect cyclone dust collector. There is a supplied template which is placed onto the lid of your container which shows you exactly where to cut out the holes for the dust ports and drill the holes for the hardware.
The kit contains the following: 2x 100mm ports, 1x 100mm infeed elbow, 1x 100mm outfeed elbow, 2x 100mm butterfly key hose clamps and a hardware pack. A container, 100mm flexible dust hose and suitable vacuum are all that is needed to create your own cyclone dust collector. The collector is ideal for high volume dust generating power tools such as routers, planes, saws and sanders and will capture 95% of the dust before reaching your extractor, saving time and replacement bag cost. This kit comes with a lifetime warranty, where if any fitting fails due to a material or manufacturing defect it will be replaced free of charge. ©
The kit allows you to collect dust for longer periods of time without losing suction power. Loss of suction is caused by prematurely filling and clogging the filter on your vacuum, which this kit eliminates. The kit is designed to work with industry standard 102mm outside diameter flexible dust hoses and is supplied with all the necessary fixtures and hardware to turn any container into a perfect cyclone dust collector. There is a supplied template which is placed onto the lid of your container which shows you exactly where to cut out the holes for the dust ports and drill the holes for the hardware.
The kit contains the following: 2x 100mm ports, 1x 100mm infeed elbow, 1x 100mm outfeed elbow, 2x 100mm butterfly key hose clamps and a hardware pack. A container, 100mm flexible dust hose and suitable vacuum are all that is needed to create your own cyclone dust collector. The collector is ideal for high volume dust generating power tools such as routers, planes, saws and sanders and will capture 95% of the dust before reaching your extractor, saving time and replacement bag cost. This kit comes with a lifetime warranty, where if any fitting fails due to a material or manufacturing defect it will be replaced free of charge. ©
Show more +
Specifications
Brand
Rutlands®
Outside Port Diameter
100mm
Show more +
5.000
10
5
Customer Reviews
Reviews (10)
Write Review....
Paul Nicholson
As always excellent service and quality goods does what it says on the tin !!
Steve Gray
This makes maintenance of the main sucky unit much easier and, I think, more efficient. I've just fitted it to the box that the vac came in and it works well! Only issue is that it does take up space but the cleaner environment is worth it.
Les Robinson
The kit was really easy to install especially with the templates provided. I have it connected to my Rutland Dust Collector and it works really well at collecting wood turnings. I would certainly recommend this kit.
Christopher Goode
I wasn't expecting much from these primarily because they were so cheap compared to other kits online. However I have been nothing but shocked and amazed at how well they work! I'm gutted that I haven't bought these sooner and put them in my extraction system.
Managed to pick up an old plastic seed bin from my local recycling centre and it has blown my mind how well this kit performs. 10 out of 10!
Managed to pick up an old plastic seed bin from my local recycling centre and it has blown my mind how well this kit performs. 10 out of 10!
Kelvin Turner
These are very good. Nicely thought out and two sets of bolts to deal with different thicknesses of lid. The fittings are larger than you might imagine because they take 4" pipe and the flanges are a good 5/8" wider all the way around. Takes quite an area to fit them on.
David Entwisle
I have been looking for a way to breathe new life into my old Record DX800, and this kit seemed to offer a solution at a lower cost than anything else I'd seen. I needed extraction which could be moved round the workshop and fitted to either my planer/thicknesser, router table, bandsaw or drum sander. It had to reduce the need for bag emptying and filter cleaning, and also reduce or eliminate the entrance to the DX clogging when planning woods such as sycamore.
I bought a 120ltr lidded food bin, fitted the pieces of my Rutland kit to the lid in about 20 minutes, connected to the DX with a short piece of 100mm hose and my P/T with about 2 metres. With a bit of scepticism I switched on both machines and ran some timber through. NOTHING went beyond the catching drum.
The Rutland kit has over the last two weeks exceeded my expectations at every use on all of my machines. I cannot recommend this enough.
I have since mounted both drum and DX onto a wheeled board for ultra easy movement round the workshop.
Great bit of kit, and in my opinion a game changer for small hobby or craft business workshops.
I bought a 120ltr lidded food bin, fitted the pieces of my Rutland kit to the lid in about 20 minutes, connected to the DX with a short piece of 100mm hose and my P/T with about 2 metres. With a bit of scepticism I switched on both machines and ran some timber through. NOTHING went beyond the catching drum.
The Rutland kit has over the last two weeks exceeded my expectations at every use on all of my machines. I cannot recommend this enough.
I have since mounted both drum and DX onto a wheeled board for ultra easy movement round the workshop.
Great bit of kit, and in my opinion a game changer for small hobby or craft business workshops.
Nick Rose
I have to admit to being a bit sceptical of this before I bought it, but the other reviewers convinced me to give it a go.
WOW I am so glad I did. Having read reviews of similar ones on other websites, they advised mounting the 'extractor' side pipe close to the centre of the bucket as possible and the 'inlet' pipe pointing in the opposite direction near the wall of the bucket. This worked really well and I have noticed very little, if any, drop in airflow and captures all but the finest dust in the bucket.
Really impressed by this kit and to say the whole dust collector including bucker cost about £45, well worth the money and I can highly recommend.
WOW I am so glad I did. Having read reviews of similar ones on other websites, they advised mounting the 'extractor' side pipe close to the centre of the bucket as possible and the 'inlet' pipe pointing in the opposite direction near the wall of the bucket. This worked really well and I have noticed very little, if any, drop in airflow and captures all but the finest dust in the bucket.
Really impressed by this kit and to say the whole dust collector including bucker cost about £45, well worth the money and I can highly recommend.
Stevan Quemby
Its not often I'm impressed with a product but these simple pipes were a breeze to use thanks to the template provided, all holes lined up perfectly onto my 120l blue barrel lid and sit nicely side by side linked up with ease with the provided fasteners and away and operational in 15minutes. They were just what i was looking for and saved having to mess around with guttering components, worth every penny.
Peter Wainwright
I was about to invest in Oneida dust deputy cyclone system when I saw this. The price of a 30 litre bucket with lid is £15 from a certain big superstore so I thought I would give this a try and if it worked I would save over £100. I am very impressed so far and would highly recommend. It does exactly what it says by trapping all the heavy dust in the bin and only the fine dust f=going to the vacuum. I am going to buy a 60 litre drum next and another kit for dedicated use with my planer.
Jon Carter
This gave a far better performance than I thought. I bought a 25 litre bucket with lid from my local garden superstore. I market the two 4" hole positions on the lid and then used a very sharp Stanley knife to cut out the holes. I bought and extra length of 4" hose from Rutlands and connected it all up to my Clarke dust vacuum. The heavy shavings fell straight into the bottom of the 25 litre bucket and the finer dust went through to the extractor. Works a treat and will save me lots of money on buying dust extractor bags. Very simple but very effective,
Show more +
£29.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process