Japanese Kataba Crosscut Saw - 180mm - Rattan
£29.99
inc. vat
Key Features
- Lifetime Warranty
If a saw should fail due to a material or manufacturing defect it will be replaced free of charge - Made Exclusively for Rutlands® by Gyokucho
World's leading Japanese saw manufacturer - Kataba Saw
For deep cuts flush to the surface and long cuts on large workpieces - Trapezoidal Teeth
For cutting across and diagonal to the grain - Cut on the Pull Stroke rather than Push Stroke
Allows the blade to be thinner for a much smoother and faster cut - Narrow Kerf
Saw removes less material and requires less energy for a super-fine, tear free cut - Impulse Hardened Teeth
Superior sharpness and stay sharper for longer - Symmetrically Set Teeth
Straight, drift free sawing - Electronically Surface Plated
To minimise friction and prevent resin build up and corrosion
Bundles
This Item: Japanese Kataba Crosscut Saw - 180mm - Rattan
£29.99
Product Details
Japanese Saws
Made exclusively for Rutlands® by Gyokucho, the world's leading Japanese saw manufacturer, these saws have one stand out difference from their western counterparts; they cut on the pull stroke rather than the push stroke. The action of pulling the saw keeps the blade in tension through the cut, which allows the blade to be thinner and lighter, for a much smoother and faster cut. The narrow kerf means that the saw removes less material and requires far less energy to achieve a super-fine, tear free and clean cut. Each tooth is impulse hardened for superior sharpness and to stay sharper for longer. The teeth are symmetrically set to ensure straight, drift free sawing and the blades are electronically surface plated to minimise friction and prevent resin build up and corrosion.
Kataba
Kataba saws have slightly thicker blades, that are very robust and not require a reinforcing back, allowing for deep cuts flush to the surface and for long cuts on large workpieces. This Kataba has a 180mm blade with impulse hardened, trapezoidal teeth for cutting across and diagonal to the grain. Each tooth is sharpened on three edges in an alternating pattern to cleanly slice, rather than tear the wood fibres leaving an extremely clean, smooth finish. The tooth geometry is excellent at clearing the kerf to prevent clogging. With its wear resistant, super hard teeth this Kataba saw will perform trimming, shoulder and flush cuts in hardwoods, exotic and tropical hardwoods, soft woods, particle boards and glued woods.
Rattan Handle
Traditional in style, the blade is mounted on a lightweight wooden handle for fatigue free working and is wrapped in rattan for excellent comfort, breathability and hold. Made in Miki City, Japan, these premium Japanese saws have lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©
Made exclusively for Rutlands® by Gyokucho, the world's leading Japanese saw manufacturer, these saws have one stand out difference from their western counterparts; they cut on the pull stroke rather than the push stroke. The action of pulling the saw keeps the blade in tension through the cut, which allows the blade to be thinner and lighter, for a much smoother and faster cut. The narrow kerf means that the saw removes less material and requires far less energy to achieve a super-fine, tear free and clean cut. Each tooth is impulse hardened for superior sharpness and to stay sharper for longer. The teeth are symmetrically set to ensure straight, drift free sawing and the blades are electronically surface plated to minimise friction and prevent resin build up and corrosion.
Kataba
Kataba saws have slightly thicker blades, that are very robust and not require a reinforcing back, allowing for deep cuts flush to the surface and for long cuts on large workpieces. This Kataba has a 180mm blade with impulse hardened, trapezoidal teeth for cutting across and diagonal to the grain. Each tooth is sharpened on three edges in an alternating pattern to cleanly slice, rather than tear the wood fibres leaving an extremely clean, smooth finish. The tooth geometry is excellent at clearing the kerf to prevent clogging. With its wear resistant, super hard teeth this Kataba saw will perform trimming, shoulder and flush cuts in hardwoods, exotic and tropical hardwoods, soft woods, particle boards and glued woods.
Rattan Handle
Traditional in style, the blade is mounted on a lightweight wooden handle for fatigue free working and is wrapped in rattan for excellent comfort, breathability and hold. Made in Miki City, Japan, these premium Japanese saws have lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©
Japanese Saws
Made exclusively for Rutlands® by Gyokucho, the world's leading Japanese saw manufacturer, these saws have one stand out difference from their western counterparts; they cut on the pull stroke rather than the push stroke. The action of pulling the saw keeps the blade in tension through the cut, which allows the blade to be thinner and lighter, for a much smoother and faster cut. The narrow kerf means that the saw removes less material and requires far less energy to achieve a super-fine, tear free and clean cut. Each tooth is impulse hardened for superior sharpness and to stay sharper for longer. The teeth are symmetrically set to ensure straight, drift free sawing and the blades are electronically surface plated to minimise friction and prevent resin build up and corrosion.
Kataba
Kataba saws have slightly thicker blades, that are very robust and not require a reinforcing back, allowing for deep cuts flush to the surface and for long cuts on large workpieces. This Kataba has a 180mm blade with impulse hardened, trapezoidal teeth for cutting across and diagonal to the grain. Each tooth is sharpened on three edges in an alternating pattern to cleanly slice, rather than tear the wood fibres leaving an extremely clean, smooth finish. The tooth geometry is excellent at clearing the kerf to prevent clogging. With its wear resistant, super hard teeth this Kataba saw will perform trimming, shoulder and flush cuts in hardwoods, exotic and tropical hardwoods, soft woods, particle boards and glued woods.
Rattan Handle
Traditional in style, the blade is mounted on a lightweight wooden handle for fatigue free working and is wrapped in rattan for excellent comfort, breathability and hold. Made in Miki City, Japan, these premium Japanese saws have lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©
Made exclusively for Rutlands® by Gyokucho, the world's leading Japanese saw manufacturer, these saws have one stand out difference from their western counterparts; they cut on the pull stroke rather than the push stroke. The action of pulling the saw keeps the blade in tension through the cut, which allows the blade to be thinner and lighter, for a much smoother and faster cut. The narrow kerf means that the saw removes less material and requires far less energy to achieve a super-fine, tear free and clean cut. Each tooth is impulse hardened for superior sharpness and to stay sharper for longer. The teeth are symmetrically set to ensure straight, drift free sawing and the blades are electronically surface plated to minimise friction and prevent resin build up and corrosion.
Kataba
Kataba saws have slightly thicker blades, that are very robust and not require a reinforcing back, allowing for deep cuts flush to the surface and for long cuts on large workpieces. This Kataba has a 180mm blade with impulse hardened, trapezoidal teeth for cutting across and diagonal to the grain. Each tooth is sharpened on three edges in an alternating pattern to cleanly slice, rather than tear the wood fibres leaving an extremely clean, smooth finish. The tooth geometry is excellent at clearing the kerf to prevent clogging. With its wear resistant, super hard teeth this Kataba saw will perform trimming, shoulder and flush cuts in hardwoods, exotic and tropical hardwoods, soft woods, particle boards and glued woods.
Rattan Handle
Traditional in style, the blade is mounted on a lightweight wooden handle for fatigue free working and is wrapped in rattan for excellent comfort, breathability and hold. Made in Miki City, Japan, these premium Japanese saws have lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©
Show more +
Specifications
Brand
Rutlands®
Tooth Type
Crosscut
Blade Length
180mm
Overall Length
395mm
Blade Thickness
0.5mm
Tooth Pitch
1.5mm
Show more +
0
5
Customer Reviews
Reviews (0)
Write Review....
£29.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process