Premium Steel Triple Pocket Hole Jig Kit
Premium Steel Triple Pocket Hole Jig Kit
£149.99
inc. vat
Home > Jointing > Pocket Hole Jointing > Pocket Hole Jigs > Steel Triple Pocket Hole Jigs > Premium Steel Triple Pocket Hole Jig Kit

Key Features

  • Premium Performance Triple Pocket Hole Jig Kit
    Containing a steel triple pocket hole jig, a face frame clamp, a 700 piece pocket hole screw kit as well as 100 oak pocket hole plugs
  • Triple Pocket Hole Jig
    Use 3 holes for an extra strong joint, 2 side by side holes for narrow stock or 2 outer holes for a standard pocket joint
  • Drill Block Made from Machined Tool-Steel
    No drill guide bushes required
  • Three Holes Will Not Wear Over Time
    Resulting in consistent angled drilling year after year
  • 700 Piece Set of Pocket Hole Screws
    Containing all the screws you could need for making pocket hole joints
  • Coarse and Fine Threaded Screws
    For all softwoods, plywood, MDF and hardwoods
  • Industry Standard No 2 Square Head
    Gives maximum grip and prevents rounding
  • 100 Premium Pocket Hole Plugs
    Plug holes, cover screws and leave an un-noticeable finish
  • Face Frame Clamp with Fast Jaw Clamping Mechanism
    Quick action clamping mechanism is applied within seconds
  • Perfect for Pocket Hole Joinery
    Large clamp faces allow you to clamp over a joint line to ensure a perfectly flush seam
  • Ensures the Pocket Hole Screw Remains True
    Without these clamps the screw can follow the grain of the wood and misalign your joint

Show more +

Bundles

Total: £179.97
This Item: Premium Steel Triple Pocket Hole Jig Kit
£149.99

Product Details

Our most premium performance pocket hole jig kit contains everything you need to get started creating clean, professional quality pocket hole joints. This kit contains a premium steel triple pocket hole jig, a 700 piece pocket hole screw kit, a pack of 100 oak pocket hole plugs and a fast jaw face frame clamp for assured workholding.

This pocket hole jig is quite exceptional, both in terms of its design and of build quality. It is the only pocket hole jig that features a triple bored drill block, which is made from machined tool-steel, that is ultra precise and abrasion resistant. Unlike conventional jigs that require threaded steel inserts to guide the drill bit, this jig does not need inserts and as such drilling is more precise. As the drilling block is made from an abrasion resistant tool-steel the three holes will not wear over time, resulting in consistent angled drilling year after year. With this triple pocket hole jig you can use all three pocket holes on one joint for maximum joint strength, or you can use the two outer holes to make a conventional pocket hole joint. Alternatively, you can use the two side by side holes to make a pocket hole joint on narrow stock. You can space the between centre hole distances at 15mm, 20mm or 35mm.

The work clamp is easily applied using the large lever, and you can vary the clamping pressure subject to the density of your wood to prevent damage or crushing of the timber fibres. The rubber face of the clamp features a ribbed design, which strengthens the grip on the workpiece without causing surface damage. A vacuum port held in position by four rare earth magnets offers effective dust removal and improved drilling performance when connected to a vacuum. A 38mm diameter x 60° dust hose coupling fitting allows you to connect to industry standard dust hoses.

To set the height of the drilling block you measure the width of your wood and then raise the drill block by the width of the wood, using the graduated metric scale machined on the side of the drilling block. The scale reads from 12mm through to 45mm. This kit contains the jig, 2 x HSS stepped drill bits, depth collar, square driver bit, pozi driver bit, a selection of coloured plugs, a magnetic vacuum port and 60° hose coupling. This is our premium performance triple pocket hole jig, beautifully finished in black electro-coating.

The 700 piece pocket hole screw set contains all the screws you could need for making pocket hole joints. The screws have No 2 Square heads, recognised as the industry standard head style by cabinetmakers worldwide as they give the best grip and will not round. Fine threaded screws are for hardwoods such as oak, cherry and walnut. Coarse threaded screws are for softwoods, plywood, MDF and melamine. Supplied in a pre-organised carry case for easy portability, the 700 piece set contains 150x 25mm screws which come with a pan head and coarse thread. 150x 32mm screws, 100x 38mm screws, 75x 50mm screws and 75x 63mm screws all in a coarse thread for softwoods and all have washer heads. Finally, 150x 32mm screws with a washer head and a fine thread for hardwoods.

To finish off a pocket hole joint you will need to insert a plug into the open hole. The plug covers the visible screw and hole making the joint unnoticeable. This kit contains a pack of 100 premium quality pocket hole plugs, in solid oak. The plugs are 9.5mm in diameter and can be used on wood thickness between 12mm and 38mm. Every plug is kiln dried to prevent the plug from shrinking in the joint.

The included face frame clamp features a fast jaw clamping mechanism which allows it to be applied one handed within seconds with minimal adjustment being needed to alter the clamping capacity. These clamps are perfect for pocket hole joinery due to their large clamp faces which allow you to clamp over joint lines to ensure perfectly flush seams on your work pieces. With the joint being held flush by the clamp it means when the pocket hole screw is fixed the screw will not follow the grain of the wood, it will remain true and not misalign the joint. The jaws swivel allowing a parallel, even clamping pressure to be achieved, even on irregular shaped work. Constructed from steel forgings for strength and durability each clamp features an ergonomically designed handle to allow you to easily transfer the clamping force. There is a quick release lever within the handle meaning the clamp can be disengaged very quickly and smoothly. Each clamp has a 75mm throat depth and clamping capacity of 70mm. The jig and clamp come with a lifetime warranty - if either should fail due to a material or manufacturing defect, they will be replaced free of charge. ©
Our most premium performance pocket hole jig kit contains everything you need to get started creating clean, professional quality pocket hole joints. This kit contains a premium steel triple pocket hole jig, a 700 piece pocket hole screw kit, a pack of 100 oak pocket hole plugs and a fast jaw face frame clamp for assured workholding.

This pocket hole jig is quite exceptional, both in terms of its design and of build quality. It is the only pocket hole jig that features a triple bored drill block, which is made from machined tool-steel, that is ultra precise and abrasion resistant. Unlike conventional jigs that require threaded steel inserts to guide the drill bit, this jig does not need inserts and as such drilling is more precise. As the drilling block is made from an abrasion resistant tool-steel the three holes will not wear over time, resulting in consistent angled drilling year after year. With this triple pocket hole jig you can use all three pocket holes on one joint for maximum joint strength, or you can use the two outer holes to make a conventional pocket hole joint. Alternatively, you can use the two side by side holes to make a pocket hole joint on narrow stock. You can space the between centre hole distances at 15mm, 20mm or 35mm.

The work clamp is easily applied using the large lever, and you can vary the clamping pressure subject to the density of your wood to prevent damage or crushing of the timber fibres. The rubber face of the clamp features a ribbed design, which strengthens the grip on the workpiece without causing surface damage. A vacuum port held in position by four rare earth magnets offers effective dust removal and improved drilling performance when connected to a vacuum. A 38mm diameter x 60° dust hose coupling fitting allows you to connect to industry standard dust hoses.

To set the height of the drilling block you measure the width of your wood and then raise the drill block by the width of the wood, using the graduated metric scale machined on the side of the drilling block. The scale reads from 12mm through to 45mm. This kit contains the jig, 2 x HSS stepped drill bits, depth collar, square driver bit, pozi driver bit, a selection of coloured plugs, a magnetic vacuum port and 60° hose coupling. This is our premium performance triple pocket hole jig, beautifully finished in black electro-coating.

The 700 piece pocket hole screw set contains all the screws you could need for making pocket hole joints. The screws have No 2 Square heads, recognised as the industry standard head style by cabinetmakers worldwide as they give the best grip and will not round. Fine threaded screws are for hardwoods such as oak, cherry and walnut. Coarse threaded screws are for softwoods, plywood, MDF and melamine. Supplied in a pre-organised carry case for easy portability, the 700 piece set contains 150x 25mm screws which come with a pan head and coarse thread. 150x 32mm screws, 100x 38mm screws, 75x 50mm screws and 75x 63mm screws all in a coarse thread for softwoods and all have washer heads. Finally, 150x 32mm screws with a washer head and a fine thread for hardwoods.

To finish off a pocket hole joint you will need to insert a plug into the open hole. The plug covers the visible screw and hole making the joint unnoticeable. This kit contains a pack of 100 premium quality pocket hole plugs, in solid oak. The plugs are 9.5mm in diameter and can be used on wood thickness between 12mm and 38mm. Every plug is kiln dried to prevent the plug from shrinking in the joint.

The included face frame clamp features a fast jaw clamping mechanism which allows it to be applied one handed within seconds with minimal adjustment being needed to alter the clamping capacity. These clamps are perfect for pocket hole joinery due to their large clamp faces which allow you to clamp over joint lines to ensure perfectly flush seams on your work pieces. With the joint being held flush by the clamp it means when the pocket hole screw is fixed the screw will not follow the grain of the wood, it will remain true and not misalign the joint. The jaws swivel allowing a parallel, even clamping pressure to be achieved, even on irregular shaped work. Constructed from steel forgings for strength and durability each clamp features an ergonomically designed handle to allow you to easily transfer the clamping force. There is a quick release lever within the handle meaning the clamp can be disengaged very quickly and smoothly. Each clamp has a 75mm throat depth and clamping capacity of 70mm. The jig and clamp come with a lifetime warranty - if either should fail due to a material or manufacturing defect, they will be replaced free of charge. ©

Show more +

Specifications

Brand Rutlands®
R6034 Premium Steel Triple Pocket Hole Jig
Weight 3kg
Length 280mm
Width 60mm
Height 106mm
Clamping Capacity 12mm to 45mm
Bit Length 180mm
Distance Between Holes 15mm, 20mm and 35mm
R6021 Premium Pocket Hole Screw Kit - 700 Piece
R6021 Supplied Screw Lengths 25mm, 32mm, 38mm, 50mm and 63mm
R6021 Total Quantity 700
R6018 Premium Pocket Hole Plugs - Oak - Pack of 100
R6018 Plug Diameter 9.5mm
R6018 Wood Width 12 to 38mm
R6018 Pack Quantity 100
R3100 Fast Jaw Face Frame Clamp - 75mm
R3100 Clamping Force 1350N
R3100 Clamping Capacity 70mm
R3100 Throat Depth 75mm

Show more +
5.000 7 5

Customer Reviews

Reviews (7)
Write Review....

Grant Jackson

Really solid jig. Upgrade from kreggR3. This is a meaty product and once installed into a base it makes pocket holes a breeze. The supplied bits seemed sharper than the kreg ones and left nice clean holes. The dust collection port is amazing, pocket holes usually are a messy affair but I was able to get through a project with virtually zero dust Only thing missing is a depth stop adjustment for the bit. I fiddled for a while to get the right spacing of the stop collar, found a 50P coin about right if you place the drill tip resting on it and tighten the collar there, but would be nice

David Bennett

Excellent all metal construction, far superior to plastic competitors! Really pleased with my purchase!

Prasad Sampathkumar

Just received the bundle and oh boy, it says - I am a quality product. Have been adding Rutlands Tools to my arsenal for sometime now and this is a perfect addition to get cabinet doors and picture frames done in quick time. Raring to get going.
Would blindly recommend this to anyone looking to upgrade from the made from plastic versions out there

Michael Ashmore

The quality of this jig is superb, the steel construction feels very sturdy and heavy. The fact there are no bushes is a bonus to me - there is no chance of them wearing away. The complete kit comes with a useful clamp for ensuring your work is joined perfectly as well as a multitude of screws for different projects and a set of plugs.

James Smithurst

Produces very clean sided holes. Easy to adjust for different wood widths and the clamp locks the wood rigidly in position. Used on tulip wood when making a built in wardrobe and it did not let me down once. Previously had a budget plastic body jig and the holes were never true and it ended up costing me money on wasted wood. This one doesn't need clamping down as it's quite heavy and stays put on the bench when drilling

Alan Bacon

Quality is evident as soon as the jig is taken out of the box. It is very weighty and has a super smooth clamping mechanism. Nice array of bits and bobs such as plugs, screws and drivers to go with the jig to get started.

Sam Muggington

I have used this daily for over a month now and there is no sign on the bushes wearing away, because guess what, there are none to wear away. This was always a pet hate of mine with other jigs, if the quality was poor then the bushes would wear leading to a sloppily drilled hole. 5 star product for that reason alone.

Show more +

Premium Steel Triple Pocket Hole Jig Kit

Rutlands®
Part No. R6048
£149.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Parcelforce 24 - £6.99
  • UPS Next Working Day - £8.99
       (Order before 1pm)
  • International - Choose Destination


* Notice
Parcelforce and Royal Mail have upcoming strikes planned on the 30th November and 1st December that could potentially cause a delay to the delivery of your order. Please allow additional time for your order to arrive. We apologise for any inconvenience caused.

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >