Premium Pocket Hole Plug Cutter - 9.5mm
Premium Pocket Hole Plug Cutter - 9.5mm
£19.99
inc. vat
Home > Jointing > Pocket Hole Jointing > Pocket Hole Plug Cutters > Premium Pocket Hole Plug Cutter - 9.5mm

Key Features

  • Lifetime Warranty
    If any cutter fails due to a material or manufacturing defect it will be replaced free of charge
  • Perfect Matching Plugs for Your Projects
    Make pocket hole plugs from offcuts of the same wood that you are working with
  • Designed with Pocket Holes in Mind
    Cut 9.5mm plugs that will snugly fit inside pocket holes
  • Cutter Will Not Deform Under Heat
    Always keeps the same cutting geometry, over its lifetime
  • Rim of the Cutter Finely Scores the Inner Circumference of the Hole
    Prior to four razor sharp cutting spurs removing the stock
  • Minimal Fibre Pull and Tearing of the Wood
    Leaving extremely clean holes and plugs
  • Cutting Edges are CNC Ground
    Less energy is required to cut the hole, making cutting quicker, whilst ensuring a long cutter life
  • Walls of the Cutters are CNC Ground and Fractionally Back Tapered
    To reduce friction and prevent binding

Show more +

Bundles

Total: £49.98
This Item: Premium Pocket Hole Plug Cutter - 9.5mm
£19.99

Product Details

Buying off the shelf wooden pocket hole plugs does not always guarantee you a perfect match with your project. As timber grain, colour and pattern can vary from tree to tree, finding an exact match can be difficult and a near match can stand out and be as obvious as no match at all. This pocket hole plug cutter allows you to make your own 9.5mm diameter pocket hole plugs from the offcuts of the same wood that you are working with, guaranteeing you a perfect match and undetectable pocket hole joints.

Made to very tight tolerances this cutter will produces extremely accurate and flawless plugs in both hardwoods and softwoods. They are manufactured from a special grade of high carbon steel which is extremely hard wearing and retains its hardness over prolonged use, resulting in a cutter that will not deform under heat and which will always keep the same cutting geometry, over its lifetime.

The rim of the cutter finely scores the inner circumference of the hole, prior to four razor sharp cutting spurs removing the stock. This results in minimal fibre pull and tearing of the wood leaving extremely clean holes and plugs. The cutting edges are CNC ground which means less energy is required to cut the hole, in turn making cutting quicker, whilst ensuring a long cutter edge life. The outer walls of the cutter are also CNC ground and fractionally back tapered to reduce friction and prevent binding.

The cutter is designed for use in a drill press and have an overall length of 140mm with a total available depth of cut of 80mm. The 13mm round shanks are machined for concentricity and will cut perfect 9.5mm plugs. The cutter comes with a lifetime warranty - if any cutter fails due to a material or manufacturing defect it will be replaced free of charge.
Buying off the shelf wooden pocket hole plugs does not always guarantee you a perfect match with your project. As timber grain, colour and pattern can vary from tree to tree, finding an exact match can be difficult and a near match can stand out and be as obvious as no match at all. This pocket hole plug cutter allows you to make your own 9.5mm diameter pocket hole plugs from the offcuts of the same wood that you are working with, guaranteeing you a perfect match and undetectable pocket hole joints.

Made to very tight tolerances this cutter will produces extremely accurate and flawless plugs in both hardwoods and softwoods. They are manufactured from a special grade of high carbon steel which is extremely hard wearing and retains its hardness over prolonged use, resulting in a cutter that will not deform under heat and which will always keep the same cutting geometry, over its lifetime.

The rim of the cutter finely scores the inner circumference of the hole, prior to four razor sharp cutting spurs removing the stock. This results in minimal fibre pull and tearing of the wood leaving extremely clean holes and plugs. The cutting edges are CNC ground which means less energy is required to cut the hole, in turn making cutting quicker, whilst ensuring a long cutter edge life. The outer walls of the cutter are also CNC ground and fractionally back tapered to reduce friction and prevent binding.

The cutter is designed for use in a drill press and have an overall length of 140mm with a total available depth of cut of 80mm. The 13mm round shanks are machined for concentricity and will cut perfect 9.5mm plugs. The cutter comes with a lifetime warranty - if any cutter fails due to a material or manufacturing defect it will be replaced free of charge.

Show more +

Specifications

Brand Rutlands
Material High Carbon Steel
Shank Type Round
Shank Diameter 13mm
Overall Length 140mm
Max Depth of Cut 80mm
Plug Diameter 9.5mm

Show more +
5.000 1 5

Customer Reviews

Reviews (1)
Write Review....

Richard Oliver

Lovely little product, it is perfect for creating matching plugs for pocket hole projects. I create a batch of 50 or so at a time so I have them to hand during projects.

Show more +

Premium Pocket Hole Plug Cutter - 9.5mm

Rutlands
Part No. R4157
£19.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £14.99
  • Saturday Next Day UK - £14.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >