Precision T Rule, Bend Rule, Rule & Protractor - Set of 4
Precision T Rule, Bend Rule, Rule & Protractor - Set of 4
£99.99
inc. vat
Home > Measuring > Rules > Rule Sets > Precision T Rule, Bend Rule, Rule & Protractor - Set of 4

Key Features

  • Lifetime Warranty
    If any component fails due to a material or manufacturing defect it will be replaced free of charge
  • Improve the Accuracy of Your Work
    The 300mm straight rule, 300mm T rule, 180mm bend rule and protractor all feature microfine marking holes
  • Unrivalled Precision
    Accurately mark your work in increments of 0.25mm, 0.5mm or 0.5° depending on the rule
  • Laser Cut Stainless Steel
    Highly accurate and protected against corrosion
  • Precision Etched Graduations
    Crisp and clear for accurate reading and will not strain your eyes
  • Eliminate Parallax Errors
    Scribe at the exact measurement with no errors
  • Set Contents:
    300mm straight rule, 300mm T rule, 180mm bend rule, protractor, four 0.5mm pencils and 48 refills

Show more +

Bundles

Product Details

This set of four rules and protractor enable precision measurements that are unobtainable with traditional rules or protractors, this will transform the way you work.

The steel rule is the most accurate way to mark points and measure precise distances. There are several microfine holes where you can locate the technical pencil for highly accurate marking. Because the rule itself is 0.2mm thick there is zero parallax error which would be common with thicker rulers. The rule features a multitude of different scales: 0 to 50mm height marking slots on the edge of the rule, 0 to 300mm distance marking slots with a marking slot every 0.5mm and 0 to 300mm guide holes with a guide hole every 0.25mm for drawing parallel lines.

The steel T rule is the most accurate way to mark a point from the edge of your workpiece, there is a marking hole every 0.25mm along the entire length of the blade. The rule also allows precise, straight, and parallel lines to be drawn at every 0.25mm from the workpiece edge. Simply insert a precision pencil into a hole and slide the T rule and pencil along to generate the line. Because the rule itself is 0.2mm thick there is zero parallax error which would be common with thicker rulers. The rule features a multitude of different scales: 0 to 50mm height marking slots on the edge of the rule, 0 to 200mm distance marking slots with a marking slot every 0.5mm and 0 to 200mm guide holes with a guide hole every 0.25mm for drawing parallel lines. The rule is secured to the T with two copper thumbscrews, these can be removed meaning the rule can be used as a conventional measuring rule for use throughout the workshop. This is our most precise and bestselling T rule which is intuitively easy to use and can be used for many setup and marking out applications.

The steel bend rule has a 90 degree shape which allows it to comfortably sit over the corner of your workpiece, this means that you can simultaneously mark on two faces at once as well as marking right on the edge. The bend rule is very precise with three sets of marking holes every 0.5mm, one on each face and one saddling the edge. The rule also allows precise, straight, and parallel lines to be drawn at every 0.5mm relative from the workpiece edge. Simply insert a precision pencil into a guide hole and slide the bend rule and pencil along to generate the line. Because the rule itself is 0.2mm thick there is zero parallax error which would be common with thicker rulers. The rule features a multitude of different scales: 0 to 180mm length marking slots with holes every 0.5mm on both faces and the edge, and 0 to 50mm distance marking slots on the end of the rule with a guide hole every 0.5mm for drawing parallel lines.

The steel protractor is the most accurate way to mark or determine angles when setting up or marking out, there is a microfine marking hole every 0.5° around the entire 180° range. Alongside the 0.5° holes there are also predefined marking holes every 1°, every 5° and every 22.5° to plot the most commonly used angles with ease and complete accuracy. A phenolic material T bar coupled with a precision crosshair ensures perfect alignment of the protractor and your workpiece edge. There are four angle scales to suit every possible need in the workshop.

The rules and protractor have been laser cut from stainless steel making them incredibly accurate and they will not rust or degrade because of the durable nature of the stainless steel. The crisp and clear precision etched graduations are very easy to read so you will not strain your eyes. The precision measurements achievable with this set are unobtainable with traditional rules or protractors, this will transform the way you work.

The set contains a 300mm straight rule, a 300mm T rule, a 180mm bend rule, protractor, four 0.5mm pencils and 48 refills. All come with a lifetime warranty - if a rule or protractor fails due to a material or manufacturing defect it will be replaced free of charge. ©
This set of four rules and protractor enable precision measurements that are unobtainable with traditional rules or protractors, this will transform the way you work.

The steel rule is the most accurate way to mark points and measure precise distances. There are several microfine holes where you can locate the technical pencil for highly accurate marking. Because the rule itself is 0.2mm thick there is zero parallax error which would be common with thicker rulers. The rule features a multitude of different scales: 0 to 50mm height marking slots on the edge of the rule, 0 to 300mm distance marking slots with a marking slot every 0.5mm and 0 to 300mm guide holes with a guide hole every 0.25mm for drawing parallel lines.

The steel T rule is the most accurate way to mark a point from the edge of your workpiece, there is a marking hole every 0.25mm along the entire length of the blade. The rule also allows precise, straight, and parallel lines to be drawn at every 0.25mm from the workpiece edge. Simply insert a precision pencil into a hole and slide the T rule and pencil along to generate the line. Because the rule itself is 0.2mm thick there is zero parallax error which would be common with thicker rulers. The rule features a multitude of different scales: 0 to 50mm height marking slots on the edge of the rule, 0 to 200mm distance marking slots with a marking slot every 0.5mm and 0 to 200mm guide holes with a guide hole every 0.25mm for drawing parallel lines. The rule is secured to the T with two copper thumbscrews, these can be removed meaning the rule can be used as a conventional measuring rule for use throughout the workshop. This is our most precise and bestselling T rule which is intuitively easy to use and can be used for many setup and marking out applications.

The steel bend rule has a 90 degree shape which allows it to comfortably sit over the corner of your workpiece, this means that you can simultaneously mark on two faces at once as well as marking right on the edge. The bend rule is very precise with three sets of marking holes every 0.5mm, one on each face and one saddling the edge. The rule also allows precise, straight, and parallel lines to be drawn at every 0.5mm relative from the workpiece edge. Simply insert a precision pencil into a guide hole and slide the bend rule and pencil along to generate the line. Because the rule itself is 0.2mm thick there is zero parallax error which would be common with thicker rulers. The rule features a multitude of different scales: 0 to 180mm length marking slots with holes every 0.5mm on both faces and the edge, and 0 to 50mm distance marking slots on the end of the rule with a guide hole every 0.5mm for drawing parallel lines.

The steel protractor is the most accurate way to mark or determine angles when setting up or marking out, there is a microfine marking hole every 0.5° around the entire 180° range. Alongside the 0.5° holes there are also predefined marking holes every 1°, every 5° and every 22.5° to plot the most commonly used angles with ease and complete accuracy. A phenolic material T bar coupled with a precision crosshair ensures perfect alignment of the protractor and your workpiece edge. There are four angle scales to suit every possible need in the workshop.

The rules and protractor have been laser cut from stainless steel making them incredibly accurate and they will not rust or degrade because of the durable nature of the stainless steel. The crisp and clear precision etched graduations are very easy to read so you will not strain your eyes. The precision measurements achievable with this set are unobtainable with traditional rules or protractors, this will transform the way you work.

The set contains a 300mm straight rule, a 300mm T rule, a 180mm bend rule, protractor, four 0.5mm pencils and 48 refills. All come with a lifetime warranty - if a rule or protractor fails due to a material or manufacturing defect it will be replaced free of charge. ©

Show more +

Specifications

Brand Rutlands®
Material Stainless steel
Thickness 0.2mm
Scale Metric

Show more +
5.000 16 5

Customer Reviews

Reviews (16)
Write Review....

Rory Stevenson

After years of approximately placed marks between two millimeter marks on a rule, it is good to finally have the confidence to work down to 0.5mm and know it is accurate. I make models and doll's house furniture so accuracy is important. These rules have made a drastic difference to my work. The bend rule especially as I can accurately mark out around all four faces of square stock and have the finishing point meet up with the starting point.

Mike Sellors

This ruler looks great, it is almost a shame to take it out of the box. There cannot be a better ruler out there, the precision achieved with this thing is great!

Stuart Kohler

Great piece of kit. If you looking for precision, this is the rule to go for

Eddie Woolfries

Fantastic piece of kit, very well made and accurate, speed of delivery was excellent. Haven't used it on a project yet but will make marking out very easy and no more guess work due to eyesite

Tim Granger

Extra length is very useful as is removing the t stop to make a flat ruler. The most precise way of measuring I have found in all my time woodworking.

Al Mellor

Simply the best tool to mark marking easier and more accurate

Geoff

Despite my eyesight going as I am now 'getting on a bit' this ruler allows me to mark more accurately than I previously could have done. The perforated holes fit the supplied precision pencil perfectly and there cannot be any mistakes made because of this. Very well recommended.

Lachlan Melville

Excellent delivery and packaging as usual from Rutlands. Loving the accuracy.

Stephen English

Excellent piece of kit, easy to handle, and well made as is everything I have bought from Rutlands, delivery is very quick too.

Mike B

Excellent product and would recommend this to anyone needing a good protractor for woodworking.

Rad

Absolutely amazing and accurate protractor. The base and added pencil are the nice touch to the product. I always wanted one but these are quite pricey, I got when it was on the offer, great buy. Get one, you will be glad you did. Thanks Rutlands.

A P Belcher

What a well engineered protractor, after using cheap plastic ones since school, (thats a lot a lot of years), this is just perfect for accurately marking angles.

Frank Richards

The protractor is very accurate and the pencil it is supplied with is super fine. Far superior to other conventional plastic protractors for accuracy.

Will

Incredible precise way to transfer measurements from the face to edge of stock. Very well made tool too.

Mr Stone

Very delicate little product but a very very good product. Extremely easy to use and incredibly precise.

George Young

Thinner than I anticipated but that is down to my not reading the full specification. Use so far has been to produce scale drawings. Bought another one as a present for my brother who is a skilled guitar maker. I am amazed at the accuracy of this item which is rapidly exceeding my ageing eyesight!

Show more +

Precision T Rule, Bend Rule, Rule & Protractor - Set of 4

Rutlands®
Part No. R9073
£99.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £14.99
  • Saturday Next Day UK - £14.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >