Precision T Rule, Bend Rule & Rule - Set of 3
Precision T Rule, Bend Rule & Rule - Set of 3
£79.99
inc. vat
Home > Measuring > Rules > Rule Sets > Precision T Rule, Bend Rule & Rule - Set of 3

Key Features

  • Lifetime Warranty
    If the rule fails due to a material or manufacturing defect it will be replaced free of charge
  • Improve the Accuracy of Your Work
    The 300mm straight rule, 300mm T rule and 180mm bend rule all feature microfine marking holes
  • Unrivalled Precision
    Accurately mark your work in increments of 0.25mm or 0.5mm depending on the rule
  • Draw Perfectly Straight and Parallel Lines
    At 0.25mm or 0.5mm intervals from the edge of your workpiece
  • Laser Cut Stainless Steel Rules
    Highly accurate and protected against corrosion
  • Precision Etched Graduations
    Crisp and clear for accurate reading and will not strain your eyes
  • Eliminate Parallax Errors
    Scribe at the exact measurement with no errors
  • Set Contents:
    300mm straight rule, 300mm T rule, 180mm bend rule, three 0.5mm pencils and 36 refills

Show more +

Bundles

Product Details

The steel rule is the most accurate way to mark points and measure precise distances. There are several microfine holes where you can locate the technical pencil for highly accurate marking. Because the rule itself is 0.2mm thick there is zero parallax error which would be common with thicker rulers. The rule features a multitude of different scales: 0 to 50mm height marking slots on the edge of the rule, 0 to 300mm distance marking slots with a marking slot every 0.5mm and 0 to 300mm guide holes with a guide hole every 0.25mm for drawing parallel lines.

The steel T rule is the most accurate way to mark a point from the edge of your workpiece, there is a marking hole every 0.25mm along the entire length of the blade. The rule also allows precise, straight, and parallel lines to be drawn at every 0.25mm from the workpiece edge. Simply insert a precision pencil into a hole and slide the T rule and pencil along to generate the line. Because the rule itself is 0.2mm thick there is zero parallax error which would be common with thicker rulers. The rule features a multitude of different scales: 0 to 50mm height marking slots on the edge of the rule, 0 to 200mm distance marking slots with a marking slot every 0.5mm and 0 to 200mm guide holes with a guide hole every 0.25mm for drawing parallel lines. The rule is secured to the T with two copper thumbscrews, these can be removed meaning the rule can be used as a conventional measuring rule for use throughout the workshop. This is our most precise and best-selling T rule which is intuitively easy to use and can be used for many setup and marking out applications.

The steel bend rule has a 90 degree shape which allows it to comfortably sit over the corner of your workpiece, this means that you can simultaneously mark on two faces at once as well as marking right on the edge. The bend rule is very precise with three sets of marking holes every 0.5mm, one on each face and one saddling the edge. The rule also allows precise, straight, and parallel lines to be drawn at every 0.5mm relative from the workpiece edge. Simply insert a precision pencil into a guide hole and slide the bend rule and pencil along to generate the line. Because the rule itself is 0.2mm thick there is zero parallax error which would be common with thicker rulers. The rule features a multitude of different scales: 0 to 180mm length marking slots with holes every 0.5mm on both faces and the edge, and 0 to 50mm distance marking slots on the end of the rule with a guide hole every 0.5mm for drawing parallel lines.

The rules have been laser cut from stainless steel making them incredibly accurate and they will not rust or degrade because of the durable nature of the stainless steel. The crisp and clear precision etched graduations are very easy to read so you will not strain your eyes. The precision measurements available with these rules are unobtainable with traditional rules, this will transform the way you work.

The set contains a 300mm straight rule, a 300mm T rule, a 180mm bend rule, three 0.5mm pencils and 36 refills. All rules come with a lifetime warranty - if the rule fails due to a material or manufacturing defect it will be replaced free of charge.
The steel rule is the most accurate way to mark points and measure precise distances. There are several microfine holes where you can locate the technical pencil for highly accurate marking. Because the rule itself is 0.2mm thick there is zero parallax error which would be common with thicker rulers. The rule features a multitude of different scales: 0 to 50mm height marking slots on the edge of the rule, 0 to 300mm distance marking slots with a marking slot every 0.5mm and 0 to 300mm guide holes with a guide hole every 0.25mm for drawing parallel lines.

The steel T rule is the most accurate way to mark a point from the edge of your workpiece, there is a marking hole every 0.25mm along the entire length of the blade. The rule also allows precise, straight, and parallel lines to be drawn at every 0.25mm from the workpiece edge. Simply insert a precision pencil into a hole and slide the T rule and pencil along to generate the line. Because the rule itself is 0.2mm thick there is zero parallax error which would be common with thicker rulers. The rule features a multitude of different scales: 0 to 50mm height marking slots on the edge of the rule, 0 to 200mm distance marking slots with a marking slot every 0.5mm and 0 to 200mm guide holes with a guide hole every 0.25mm for drawing parallel lines. The rule is secured to the T with two copper thumbscrews, these can be removed meaning the rule can be used as a conventional measuring rule for use throughout the workshop. This is our most precise and best-selling T rule which is intuitively easy to use and can be used for many setup and marking out applications.

The steel bend rule has a 90 degree shape which allows it to comfortably sit over the corner of your workpiece, this means that you can simultaneously mark on two faces at once as well as marking right on the edge. The bend rule is very precise with three sets of marking holes every 0.5mm, one on each face and one saddling the edge. The rule also allows precise, straight, and parallel lines to be drawn at every 0.5mm relative from the workpiece edge. Simply insert a precision pencil into a guide hole and slide the bend rule and pencil along to generate the line. Because the rule itself is 0.2mm thick there is zero parallax error which would be common with thicker rulers. The rule features a multitude of different scales: 0 to 180mm length marking slots with holes every 0.5mm on both faces and the edge, and 0 to 50mm distance marking slots on the end of the rule with a guide hole every 0.5mm for drawing parallel lines.

The rules have been laser cut from stainless steel making them incredibly accurate and they will not rust or degrade because of the durable nature of the stainless steel. The crisp and clear precision etched graduations are very easy to read so you will not strain your eyes. The precision measurements available with these rules are unobtainable with traditional rules, this will transform the way you work.

The set contains a 300mm straight rule, a 300mm T rule, a 180mm bend rule, three 0.5mm pencils and 36 refills. All rules come with a lifetime warranty - if the rule fails due to a material or manufacturing defect it will be replaced free of charge.

Show more +

Specifications

Brand Rutlands
Material Stainless steel
Ruler Thickness 0.2mm
Scale Metric

Show more +
5.000 1 5

Customer Reviews

Reviews (1)
Write Review....

Rory Stevenson

After years of approximately placed marks between two millimeter marks on a rule, it is good to finally have the confidence to work down to 0.5mm and know it is accurate. I make models and doll's house furniture so accuracy is important. These rules have made a drastic difference to my work. The bend rule especially as I can accurately mark out around all four faces of square stock and have the finishing point meet up with the starting point.

Show more +

Precision T Rule, Bend Rule & Rule - Set of 3

Rutlands
Part No. R9072
£79.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £14.99
  • Saturday Next Day UK - £14.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >