Japanese Chisels Tataki Nomi - Set of 10
£249.99
inc. vat
Home > More > Chiseling > Chisels > Japanese Tataki Nomi Chisels > Japanese Chisels Tataki Nomi - Set of 10
Key Features
- Made by a Japanese Master Blacksmith
Exclusively for Rutlands® - Japanese Tataki Nomi Chisels
Double-layered, ultra sharp blades with outstanding edge life - Soft Iron Forged with Extremely Hard Carbon Tool Steel
Prevents brittle fractures, unlike single layer Western chisels - Backs of the Blades are Hollow Ground
Reduces contact surface and friction and lowers necessary cutting force - Angle of the Blade to the Tang
Increases the cutting depth to almost twice the blade length - Conical Steel Ferrule
Transfers the impact to the blade - Made by Japanese Master Blacksmiths
Producing chisels that are unparalleled in performance
Bundles
This Item: Japanese Chisels Tataki Nomi - Set of 10
£249.99
Product Details
Made by a Japanese master blacksmith, exclusively for Rutlands®, these Japanese Tataki Nomi chisels (Nomi means chisel in Japanese) feature double-layered, ultra sharp blades with outstanding edge life.
A soft iron body is forge welded to a thinner layer of extremely hard, Rc 62-63, carbon tool steel. This double-layer prevents brittle fractures, unlike single layer Western chisels, that become brittle when hardened to extreme temperatures. The backs of the blades are hollow ground to reduce the contact surface, reducing friction and lowering the necessary cutting force. The angle of the blade to the tang increases the cutting depth to almost twice the blade length.
A conical steel ferrule, which transfers the impact to the blade, sits seamlessly between the blade and the handle to protect the handle against fracture when repeatedly hit with a hammer. The steel ferrule on the butt end of the handle should be driven down prior to use so that the hammer only makes direct contact with the Japanese red oak handle. The wood above the ferrule will eventually spread over the top of it to protect both the hammer and the reinforcing ring.
Masters of their craft, which would take an apprentice approximately 10-15 years to learn, these Japanese blacksmiths produce chisels that are unparalleled in performance even by chisels made using today's state of the art technology. This set contains 10 chisels: 6mm, 9mm, 12mm, 15mm, 18mm, 21mm, 24mm, 30mm, 36mm and 42mm beautifully presented in a fitted wooden box. These are quite exceptional chisels. ©
A soft iron body is forge welded to a thinner layer of extremely hard, Rc 62-63, carbon tool steel. This double-layer prevents brittle fractures, unlike single layer Western chisels, that become brittle when hardened to extreme temperatures. The backs of the blades are hollow ground to reduce the contact surface, reducing friction and lowering the necessary cutting force. The angle of the blade to the tang increases the cutting depth to almost twice the blade length.
A conical steel ferrule, which transfers the impact to the blade, sits seamlessly between the blade and the handle to protect the handle against fracture when repeatedly hit with a hammer. The steel ferrule on the butt end of the handle should be driven down prior to use so that the hammer only makes direct contact with the Japanese red oak handle. The wood above the ferrule will eventually spread over the top of it to protect both the hammer and the reinforcing ring.
Masters of their craft, which would take an apprentice approximately 10-15 years to learn, these Japanese blacksmiths produce chisels that are unparalleled in performance even by chisels made using today's state of the art technology. This set contains 10 chisels: 6mm, 9mm, 12mm, 15mm, 18mm, 21mm, 24mm, 30mm, 36mm and 42mm beautifully presented in a fitted wooden box. These are quite exceptional chisels. ©
Made by a Japanese master blacksmith, exclusively for Rutlands®, these Japanese Tataki Nomi chisels (Nomi means chisel in Japanese) feature double-layered, ultra sharp blades with outstanding edge life.
A soft iron body is forge welded to a thinner layer of extremely hard, Rc 62-63, carbon tool steel. This double-layer prevents brittle fractures, unlike single layer Western chisels, that become brittle when hardened to extreme temperatures. The backs of the blades are hollow ground to reduce the contact surface, reducing friction and lowering the necessary cutting force. The angle of the blade to the tang increases the cutting depth to almost twice the blade length.
A conical steel ferrule, which transfers the impact to the blade, sits seamlessly between the blade and the handle to protect the handle against fracture when repeatedly hit with a hammer. The steel ferrule on the butt end of the handle should be driven down prior to use so that the hammer only makes direct contact with the Japanese red oak handle. The wood above the ferrule will eventually spread over the top of it to protect both the hammer and the reinforcing ring.
Masters of their craft, which would take an apprentice approximately 10-15 years to learn, these Japanese blacksmiths produce chisels that are unparalleled in performance even by chisels made using today's state of the art technology. This set contains 10 chisels: 6mm, 9mm, 12mm, 15mm, 18mm, 21mm, 24mm, 30mm, 36mm and 42mm beautifully presented in a fitted wooden box. These are quite exceptional chisels. ©
A soft iron body is forge welded to a thinner layer of extremely hard, Rc 62-63, carbon tool steel. This double-layer prevents brittle fractures, unlike single layer Western chisels, that become brittle when hardened to extreme temperatures. The backs of the blades are hollow ground to reduce the contact surface, reducing friction and lowering the necessary cutting force. The angle of the blade to the tang increases the cutting depth to almost twice the blade length.
A conical steel ferrule, which transfers the impact to the blade, sits seamlessly between the blade and the handle to protect the handle against fracture when repeatedly hit with a hammer. The steel ferrule on the butt end of the handle should be driven down prior to use so that the hammer only makes direct contact with the Japanese red oak handle. The wood above the ferrule will eventually spread over the top of it to protect both the hammer and the reinforcing ring.
Masters of their craft, which would take an apprentice approximately 10-15 years to learn, these Japanese blacksmiths produce chisels that are unparalleled in performance even by chisels made using today's state of the art technology. This set contains 10 chisels: 6mm, 9mm, 12mm, 15mm, 18mm, 21mm, 24mm, 30mm, 36mm and 42mm beautifully presented in a fitted wooden box. These are quite exceptional chisels. ©
Show more +
Specifications
Brand
Rutlands®
Blade Length
60mm
Overall Length
225mm
Blade Thickness
6mm
Show more +
5.000
2
5
Customer Reviews
Reviews (2)
Write Review....
Charles Norman
Always wanted a set of Japanese chisels. These from Rutland's were at a brilliant price, very nice quality and we're a dream to get an exceptional edge on scary Sharpe with very little effort.i love the products from this store as the service and delivery are excellent.
Nigel Kemp
Bought these as my first ever set of Japanese Chisels. Quite different from what I was used to but with a bit of practice they are proving far better than my old chisels. They are delightful to use and are an excellent product. The quality of advice from Rutlands in advance of the purchase was excellent.
Show more +
£249.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process