
No 95 Edge Plane
£89.99
inc. vat
Key Features
- Lifetime Warranty
If a plane should fail due to a material or manufacturing defect it will be replaced free of charge - Made Exclusively for Rutlands® by Luban
A world leader in hand plane manufacturing - No 95 Edge Plane
Designed to precisely and squarely trim the edges of stock or jointing boards - Low Angle Blade
Ensures fine planing on both cross and end grain at exactly 90° to the face - Integral 90° Precision Machined Fence
Ensures the planing always occurs squarely to the face of stock - Blade Adjustment Mechanism
Easily allows the blade depth to be varied to change the depth of cut - Precision Machined
Unbreakable CR40 steel castings are precision machined to ensure the sole is flat and square to the fence - T10 High Carbon Steel Tool Blade
Which takes a keen edge, and that has been hardened to RC60-64 for maximum edge retention
Bundles
Product Details
Edge Planes
Made exclusively for Rutlands® by Luban, a world leader in hand plane manufacturing, these planes are a serious alternative to the premium brands that are produced in North America. The renowned design has a screw mechanism that easily allows the blade to be varied in depth relative to the sole to change the depth of cut. An edge plane is designed to precisely and squarely trim the edges of stock or jointing boards and due to the low angle blade ensures fine planing on both cross and end grain at exactly 90° to the face.
No 95 Edge Plane
This edge plane is designed for right handed use, but can easily be used by left handers. The integral 90° precision machined fence ensures the planing always occurs squarely to the face of stock. Two grub screws at either side of the blade keeps it from moving if it hits a knot and it has a fine pitch blade adjustment thread for improved blade setting accuracy. Different angles can be planed if required by adding home made wooden blocks to the inner face of the fence. A 32mm wide, 25° bevelled blade that is skewed by 30° is seated at 12° within the plane, giving an effective angle of 37° for fine planing of both cross and end grain. The plane has an overall length of 165mm and weighs 850g.
Materials & Manufacturing
The plane body features unbreakable CR40 steel castings which are precision machined to ensure the sole is flat and square to the fence. It has been finished in an epoxy powder coat for protection and durability. The plane is fitted with a T10 high carbon steel tool blade which can take a keen edge, and that has been hardened to RC60-64 for maximum edge retention. The blade is held in position by a polished stainless steel lever cap and knurl screw. The planes have a lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©"
Made exclusively for Rutlands® by Luban, a world leader in hand plane manufacturing, these planes are a serious alternative to the premium brands that are produced in North America. The renowned design has a screw mechanism that easily allows the blade to be varied in depth relative to the sole to change the depth of cut. An edge plane is designed to precisely and squarely trim the edges of stock or jointing boards and due to the low angle blade ensures fine planing on both cross and end grain at exactly 90° to the face.
No 95 Edge Plane
This edge plane is designed for right handed use, but can easily be used by left handers. The integral 90° precision machined fence ensures the planing always occurs squarely to the face of stock. Two grub screws at either side of the blade keeps it from moving if it hits a knot and it has a fine pitch blade adjustment thread for improved blade setting accuracy. Different angles can be planed if required by adding home made wooden blocks to the inner face of the fence. A 32mm wide, 25° bevelled blade that is skewed by 30° is seated at 12° within the plane, giving an effective angle of 37° for fine planing of both cross and end grain. The plane has an overall length of 165mm and weighs 850g.
Materials & Manufacturing
The plane body features unbreakable CR40 steel castings which are precision machined to ensure the sole is flat and square to the fence. It has been finished in an epoxy powder coat for protection and durability. The plane is fitted with a T10 high carbon steel tool blade which can take a keen edge, and that has been hardened to RC60-64 for maximum edge retention. The blade is held in position by a polished stainless steel lever cap and knurl screw. The planes have a lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©"
Edge Planes
Made exclusively for Rutlands® by Luban, a world leader in hand plane manufacturing, these planes are a serious alternative to the premium brands that are produced in North America. The renowned design has a screw mechanism that easily allows the blade to be varied in depth relative to the sole to change the depth of cut. An edge plane is designed to precisely and squarely trim the edges of stock or jointing boards and due to the low angle blade ensures fine planing on both cross and end grain at exactly 90° to the face.
No 95 Edge Plane
This edge plane is designed for right handed use, but can easily be used by left handers. The integral 90° precision machined fence ensures the planing always occurs squarely to the face of stock. Two grub screws at either side of the blade keeps it from moving if it hits a knot and it has a fine pitch blade adjustment thread for improved blade setting accuracy. Different angles can be planed if required by adding home made wooden blocks to the inner face of the fence. A 32mm wide, 25° bevelled blade that is skewed by 30° is seated at 12° within the plane, giving an effective angle of 37° for fine planing of both cross and end grain. The plane has an overall length of 165mm and weighs 850g.
Materials & Manufacturing
The plane body features unbreakable CR40 steel castings which are precision machined to ensure the sole is flat and square to the fence. It has been finished in an epoxy powder coat for protection and durability. The plane is fitted with a T10 high carbon steel tool blade which can take a keen edge, and that has been hardened to RC60-64 for maximum edge retention. The blade is held in position by a polished stainless steel lever cap and knurl screw. The planes have a lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©"
Made exclusively for Rutlands® by Luban, a world leader in hand plane manufacturing, these planes are a serious alternative to the premium brands that are produced in North America. The renowned design has a screw mechanism that easily allows the blade to be varied in depth relative to the sole to change the depth of cut. An edge plane is designed to precisely and squarely trim the edges of stock or jointing boards and due to the low angle blade ensures fine planing on both cross and end grain at exactly 90° to the face.
No 95 Edge Plane
This edge plane is designed for right handed use, but can easily be used by left handers. The integral 90° precision machined fence ensures the planing always occurs squarely to the face of stock. Two grub screws at either side of the blade keeps it from moving if it hits a knot and it has a fine pitch blade adjustment thread for improved blade setting accuracy. Different angles can be planed if required by adding home made wooden blocks to the inner face of the fence. A 32mm wide, 25° bevelled blade that is skewed by 30° is seated at 12° within the plane, giving an effective angle of 37° for fine planing of both cross and end grain. The plane has an overall length of 165mm and weighs 850g.
Materials & Manufacturing
The plane body features unbreakable CR40 steel castings which are precision machined to ensure the sole is flat and square to the fence. It has been finished in an epoxy powder coat for protection and durability. The plane is fitted with a T10 high carbon steel tool blade which can take a keen edge, and that has been hardened to RC60-64 for maximum edge retention. The blade is held in position by a polished stainless steel lever cap and knurl screw. The planes have a lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©"
Show more +
Specifications
Brand
Rutlands®
Plane Length
165mm
Fence Height
25mm
Fence Width
25mm
Bed Angle
12°
Blade Angle
25°
Blade Thickness
3mm
Blade Width
32mm
Weight
0.85kg
Show more +
5.000
1
5
Customer Reviews
Reviews (1)
Write Review....
Colin Waters
great for the price, a nice hefty feel , blade is nice and thick and once honed seems to hold its edge well, cuts across and with the grain smoothly, all in all a nice addition to the workshop.
Show more +
£89.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process