No 62 Low Angle Jack Plane
£199.99
inc. vat
Key Features
- Lifetime Warranty
If a plane should fail due to a material or manufacturing defect it will be replaced free of charge - Made Exclusively for Rutlands® by Luban
A world leader in hand plane manufacturing - No 62 Low Angle Jack Plane
The low angle design of this plane is perfect for working on end grain and initial smoothing - Bedrock Design
Allows the frog to be adjusted without removing the blade or lever cap to adjust the mouth opening - Maximum Stability
The frog extends to the slot milled in the sole of the plane, to provide support at its cutting edge - Stainless Steel Cap Iron and Chipbreaker
Supports the blade against the full length frog for less chatter and tearout. - Easily Vary the Blade Depth
A screw mechanism allows the cutting depth to be adjusted without removing the blade - Lateral Adjustment Lever
Used to ensure the blade sits square to the mouth opening - Precision Machined
Stress relieved ductile iron castings are precision machined to ensure the soles are flat and square to the sides - T10 High Carbon Steel Tool Blade
Which takes a keen edge, and that has been hardened to RC60-64 for maximum edge retention.
Product Details
Bench Planes
Made exclusively for Rutlands® by Luban, a world leader in hand plane manufacturing, these planes are a serious alternative to the premium brands that are produced in North America. The planes use the reliable bedrock design that gives maximum stability and support for the cutting iron during use as the frog extends all the way to the sole to provide support at its cutting edge. The renowned design has a screw mechanism that allows the frog to be adjusted without removing the blade or lever cap, easily allowing the blade to be adjusted relative to the sole to adjust the mouth opening. It can be made narrow for fine shavings or opened for coarse material.
No 62 Low Angle Jack Plane
A jack plane has been designed to be used across the grain and will perform trimming, flattening and stock removal tasks accurately and effortlessly. The low angle design of this plane is perfect for working on end grain and initial smoothing. The plane features a lateral adjustment lever that is used to ensure the blade sits square to the mouth opening. The blade can also be adjusted vertically using a knurled brass knob to change the depth of cut. The plane has an overall length of 355mm, is 62mm wide and weighs 2.6kg.
Materials & Manufacturing
The plane body features a heavy, stress relieved ductile iron casting which is precision machined to ensure the sole is flat and square to the sides. The plane is fitted with a T10 high carbon steel tool blade which can take a keen edge, and that has been hardened to RC60-64 for maximum edge retention. A thick stainless steel cap iron and a chipbreaker supports the blade against the full length frog for less chatter and tearout. The front knob and handle are made from solid bubinga wood which provides a firm and comfortable grip. The planes have a lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©
Made exclusively for Rutlands® by Luban, a world leader in hand plane manufacturing, these planes are a serious alternative to the premium brands that are produced in North America. The planes use the reliable bedrock design that gives maximum stability and support for the cutting iron during use as the frog extends all the way to the sole to provide support at its cutting edge. The renowned design has a screw mechanism that allows the frog to be adjusted without removing the blade or lever cap, easily allowing the blade to be adjusted relative to the sole to adjust the mouth opening. It can be made narrow for fine shavings or opened for coarse material.
No 62 Low Angle Jack Plane
A jack plane has been designed to be used across the grain and will perform trimming, flattening and stock removal tasks accurately and effortlessly. The low angle design of this plane is perfect for working on end grain and initial smoothing. The plane features a lateral adjustment lever that is used to ensure the blade sits square to the mouth opening. The blade can also be adjusted vertically using a knurled brass knob to change the depth of cut. The plane has an overall length of 355mm, is 62mm wide and weighs 2.6kg.
Materials & Manufacturing
The plane body features a heavy, stress relieved ductile iron casting which is precision machined to ensure the sole is flat and square to the sides. The plane is fitted with a T10 high carbon steel tool blade which can take a keen edge, and that has been hardened to RC60-64 for maximum edge retention. A thick stainless steel cap iron and a chipbreaker supports the blade against the full length frog for less chatter and tearout. The front knob and handle are made from solid bubinga wood which provides a firm and comfortable grip. The planes have a lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©
Bench Planes
Made exclusively for Rutlands® by Luban, a world leader in hand plane manufacturing, these planes are a serious alternative to the premium brands that are produced in North America. The planes use the reliable bedrock design that gives maximum stability and support for the cutting iron during use as the frog extends all the way to the sole to provide support at its cutting edge. The renowned design has a screw mechanism that allows the frog to be adjusted without removing the blade or lever cap, easily allowing the blade to be adjusted relative to the sole to adjust the mouth opening. It can be made narrow for fine shavings or opened for coarse material.
No 62 Low Angle Jack Plane
A jack plane has been designed to be used across the grain and will perform trimming, flattening and stock removal tasks accurately and effortlessly. The low angle design of this plane is perfect for working on end grain and initial smoothing. The plane features a lateral adjustment lever that is used to ensure the blade sits square to the mouth opening. The blade can also be adjusted vertically using a knurled brass knob to change the depth of cut. The plane has an overall length of 355mm, is 62mm wide and weighs 2.6kg.
Materials & Manufacturing
The plane body features a heavy, stress relieved ductile iron casting which is precision machined to ensure the sole is flat and square to the sides. The plane is fitted with a T10 high carbon steel tool blade which can take a keen edge, and that has been hardened to RC60-64 for maximum edge retention. A thick stainless steel cap iron and a chipbreaker supports the blade against the full length frog for less chatter and tearout. The front knob and handle are made from solid bubinga wood which provides a firm and comfortable grip. The planes have a lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©
Made exclusively for Rutlands® by Luban, a world leader in hand plane manufacturing, these planes are a serious alternative to the premium brands that are produced in North America. The planes use the reliable bedrock design that gives maximum stability and support for the cutting iron during use as the frog extends all the way to the sole to provide support at its cutting edge. The renowned design has a screw mechanism that allows the frog to be adjusted without removing the blade or lever cap, easily allowing the blade to be adjusted relative to the sole to adjust the mouth opening. It can be made narrow for fine shavings or opened for coarse material.
No 62 Low Angle Jack Plane
A jack plane has been designed to be used across the grain and will perform trimming, flattening and stock removal tasks accurately and effortlessly. The low angle design of this plane is perfect for working on end grain and initial smoothing. The plane features a lateral adjustment lever that is used to ensure the blade sits square to the mouth opening. The blade can also be adjusted vertically using a knurled brass knob to change the depth of cut. The plane has an overall length of 355mm, is 62mm wide and weighs 2.6kg.
Materials & Manufacturing
The plane body features a heavy, stress relieved ductile iron casting which is precision machined to ensure the sole is flat and square to the sides. The plane is fitted with a T10 high carbon steel tool blade which can take a keen edge, and that has been hardened to RC60-64 for maximum edge retention. A thick stainless steel cap iron and a chipbreaker supports the blade against the full length frog for less chatter and tearout. The front knob and handle are made from solid bubinga wood which provides a firm and comfortable grip. The planes have a lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©
Show more +
Specifications
Brand
Rutlands®
Sole Length
355mm
Sole Width
62mm
Bed Angle
12°
Blade Angle
45°
Blade Thickness
3mm
Blade Width
58mm
Weight
2.4kg
Show more +
5.000
3
5
Customer Reviews
Reviews (3)
Write Review....
Adrian Barascu
W Wright
I own about 4 stanley and record hand planes so after reading the other reviews i thought id try this one .1st low angle plane iv used.much more than I usually would spend on a hand plane but have to say I don't regret it one little bit. Beautifully made and planes like a dream .much easier to push i notice.sole is not flat tho but is close.il leave as it is for now.absolutly love this thing and highly recommend it.think il buy the block plane now as well
J Heathcote
Wow - Veritas must be worried. Put a straight edge and feeler gauges under the sole of the plane and less than 1/10" of a thou across the whole length. Photo does not do justice to the plane.
Show more +
£199.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process
Excellent finish and overall very good build quality.
Good packaging ensured it arrived intact.
If you take time to completely disassemble it after getting it out and remove any burrs that might have escaped quality control, you have a first class plane, which will serve you for years to come.<