No 7 Jointer Plane
No 7 Jointer Plane
£269.99
inc. vat
Home > More > Planing > Hand Planes > Jointer Planes > No 7 Jointer Plane

Key Features

  • Lifetime Warranty
    If a plane should fail due to a material or manufacturing defect it will be replaced free of charge
  • Made Exclusively for Rutlands® by Luban
    A world leader in hand plane manufacturing
  • No 7 Jointer Plane
    The longest of the standard bench planes and remove peaks and troughs from the edges and surfaces of boards
  • Bedrock Design
    Allows the frog to be adjusted without removing the blade or lever cap to adjust the mouth opening
  • Maximum Stability
    The frog extends to the slot milled in the sole of the plane, to provide support at its cutting edge
  • Stainless Steel Cap Iron and Chipbreaker
    Supports the blade against the full length frog for less chatter and tearout
  • Easily Vary the Blade Depth
    A screw mechanism allows the cutting depth to be adjusted without removing the blade
  • Lateral Adjustment Lever
    Used to ensure the blade sits square to the mouth opening
  • Precision Machined
    Stress relieved ductile iron castings are precision machined to ensure the soles are flat and square to the sides
  • T10 High Carbon Steel Tool Blade
    Which takes a keen edge, and that has been hardened to RC60-64 for maximum edge retention

Show more +

Product Details

Bench Planes
Made exclusively for Rutlands® by Luban, a world leader in hand plane manufacturing, these planes are a serious alternative to the premium brands that are produced in North America. The planes use the reliable bedrock design that gives maximum stability and support for the cutting iron during use as the frog extends all the way to the sole to provide support at its cutting edge. The renowned design has a screw mechanism that allows the frog to be adjusted without removing the blade or lever cap, easily allowing the blade to be adjusted relative to the sole to adjust the mouth opening. It can be made narrow for fine shavings or opened for coarse material.

No 7 Jointer Plane
A jointer plane has the weight and accuracy needed for jointing. The plane is the longest of the standard bench planes and is the perfect length to remove peaks, troughs and undulations from the edges and surfaces of boards. Its primary function in the workshop is to square up the edges of boards so the fit perfectly together for jointing. The plane features a lateral adjustment lever that is used to ensure the blade sits square to the mouth opening. The blade can also be adjusted vertically using a knurled brass knob to change the depth of cut. The plane has an overall length of 555mm, is 72mm wide and weighs 4.4kgs.

Materials & Manufacturing
The plane body features a heavy, stress relieved ductile iron casting which is precision machined to ensure the sole is flat and square to the sides. The plane is fitted with a T10 high carbon steel tool blade which can take a keen edge, and that has been hardened to RC60-64 for maximum edge retention. A thick stainless steel cap iron and a chipbreaker supports the blade against the full length frog for less chatter and tearout. The front knob and handle are made from solid bubinga wood which provides a firm and comfortable grip. The planes have a lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©
Bench Planes
Made exclusively for Rutlands® by Luban, a world leader in hand plane manufacturing, these planes are a serious alternative to the premium brands that are produced in North America. The planes use the reliable bedrock design that gives maximum stability and support for the cutting iron during use as the frog extends all the way to the sole to provide support at its cutting edge. The renowned design has a screw mechanism that allows the frog to be adjusted without removing the blade or lever cap, easily allowing the blade to be adjusted relative to the sole to adjust the mouth opening. It can be made narrow for fine shavings or opened for coarse material.

No 7 Jointer Plane
A jointer plane has the weight and accuracy needed for jointing. The plane is the longest of the standard bench planes and is the perfect length to remove peaks, troughs and undulations from the edges and surfaces of boards. Its primary function in the workshop is to square up the edges of boards so the fit perfectly together for jointing. The plane features a lateral adjustment lever that is used to ensure the blade sits square to the mouth opening. The blade can also be adjusted vertically using a knurled brass knob to change the depth of cut. The plane has an overall length of 555mm, is 72mm wide and weighs 4.4kgs.

Materials & Manufacturing
The plane body features a heavy, stress relieved ductile iron casting which is precision machined to ensure the sole is flat and square to the sides. The plane is fitted with a T10 high carbon steel tool blade which can take a keen edge, and that has been hardened to RC60-64 for maximum edge retention. A thick stainless steel cap iron and a chipbreaker supports the blade against the full length frog for less chatter and tearout. The front knob and handle are made from solid bubinga wood which provides a firm and comfortable grip. The planes have a lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©

Show more +

Specifications

Brand Rutlands®
Sole Length 555mm
Sole Width 72mm
Blade Thickness 3mm
Blade Width 60mm
Weight 4.4kgs

Show more +
5.000 3 5

Customer Reviews

Reviews (3)
Write Review....

Liam Corrigan

Very nice plane. Good weight to it. Sole isn't perfectly flat however, so I may have to address this.

Stephen Leacock

Fantastically made witha flatness in it length better tan 0.0015" or 0.04mm solid heavy and very nicely finished , just required disassembly and cleaning of anti corrosion oil before use

Andy

Absolutely fantastic plane. Would heartily recommend anyone buy this series of planes. I found this plane to be the same quality as veritas. Sole arrived dead flat with sides dead square. Very little fettling required to get the plane ready for work. I recon it's a bit of a gamble giving lots of money to this untried brand, but for me it paid off and I'm not in the market for a Quangsheng jack!

Show more +

No 7 Jointer Plane

Rutlands®
Part No. R1709
£269.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Parcelforce 24 - £6.99
  • UPS Next Working Day - £8.99
       (Order before 1pm)
  • International - Choose Destination


* Notice
Parcelforce and Royal Mail have upcoming strikes planned on the 11th, 14th and 15th December that could potentially cause a delay to the delivery of your order. Please allow additional time for your order to arrive. We apologise for any inconvenience caused.

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >