No 60 1/2 Low Angle & No 60 1/2 Low Angle Rebate Block Planes - Set of 2
£139.99
inc. vat
Home > More > Planing > Hand Planes > Plane Sets > No 60 1/2 Low Angle & No 60 1/2 Low Angle Rebate Block Planes - Set of 2
Key Features
- Lifetime Warranty
If a plane should fail due to a material or manufacturing defect it will be replaced free of charge - Made Exclusively for Rutlands® by Luban
A world leader in hand plane manufacturing - Low Angle Block Plane
The low angle ensures that this block plane is especially good when used on end grain - Low Angle Rebate Block Plane
Trim and finish end grain on difficult areas such as tenon shoulders - Fine Pitch Blade Adjustment Thread
For improved blade setting accuracy - Easily Vary the Blade Depth
A screw mechanism allows the depth to be adjusted without removing the blade - Precision Machined
Stress relieved ductile iron castings are precision machined to ensure the soles are flat and square to the sides - T10 High Carbon Steel Tool Blade
Which takes a keen edge, and that has been hardened to RC60-64 for maximum edge retention
Product Details
Block Planes
Made exclusively for Rutlands® by Luban, a world leader in hand plane manufacturing, these planes are a serious alternative to the premium brands that are produced in North America. The renowned design has a screw mechanism that easily allows the blade to be varied in depth relative to the sole to change the depth of cut.
Low Angle Block Plane
A block plane is small enough to be used in one hand and is designed for cutting end grain and making trimming or fine adjustment cuts. The low angle ensures that this block plane is especially good when used on end grain. The plane has a modified body casting to make it more responsive in use and a finer pitch blade adjustment thread for improved blade setting accuracy. An adjustable nosepiece allows the mouth to be opened or closed to accommodate coarse or ultra-fine shavings, this nosepiece is secured in place with a knurled brass knob. A 35mm wide, 25° bevelled blade is seated at 12° within the plane, giving an effective angle of 37° for end grain work. The plane has an overall length of 165mm and weighs 850g.
Low Angle Rebate Block Plane
A block plane is small enough to be used in one hand and is designed for cutting end grain and making trimming or fine adjustment cuts. This rebating block plane offers the end grain cutting capability of a low angle block plane and combines it with the flush cutting ability of a rebating plane. This gives a plane that will trim and finish end grain on difficult areas such as tenon shoulders. The plane has a modified body casting to make it more responsive in use and a finer pitch blade adjustment thread for improved blade setting accuracy. A 35mm wide, 25° bevelled blade is seated at 12° within the plane, giving an effective angle of 37° for end grain work. The plane has an overall length of 160mm and weighs 850g.
Materials & Manufacturing
The plane body features heavy, stress relieved ductile iron castings which are precision machined to ensure the soles are flat and square to the sides. The plane is fitted with a T10 high carbon steel tool blade which can take a keen edge, and that has been hardened to RC60-64 for maximum edge retention. The blade is held in position by a large bronze cap iron with an integrated palm rest which allows the plane to nestle snugly in the hand. The planes have a lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©
Made exclusively for Rutlands® by Luban, a world leader in hand plane manufacturing, these planes are a serious alternative to the premium brands that are produced in North America. The renowned design has a screw mechanism that easily allows the blade to be varied in depth relative to the sole to change the depth of cut.
Low Angle Block Plane
A block plane is small enough to be used in one hand and is designed for cutting end grain and making trimming or fine adjustment cuts. The low angle ensures that this block plane is especially good when used on end grain. The plane has a modified body casting to make it more responsive in use and a finer pitch blade adjustment thread for improved blade setting accuracy. An adjustable nosepiece allows the mouth to be opened or closed to accommodate coarse or ultra-fine shavings, this nosepiece is secured in place with a knurled brass knob. A 35mm wide, 25° bevelled blade is seated at 12° within the plane, giving an effective angle of 37° for end grain work. The plane has an overall length of 165mm and weighs 850g.
Low Angle Rebate Block Plane
A block plane is small enough to be used in one hand and is designed for cutting end grain and making trimming or fine adjustment cuts. This rebating block plane offers the end grain cutting capability of a low angle block plane and combines it with the flush cutting ability of a rebating plane. This gives a plane that will trim and finish end grain on difficult areas such as tenon shoulders. The plane has a modified body casting to make it more responsive in use and a finer pitch blade adjustment thread for improved blade setting accuracy. A 35mm wide, 25° bevelled blade is seated at 12° within the plane, giving an effective angle of 37° for end grain work. The plane has an overall length of 160mm and weighs 850g.
Materials & Manufacturing
The plane body features heavy, stress relieved ductile iron castings which are precision machined to ensure the soles are flat and square to the sides. The plane is fitted with a T10 high carbon steel tool blade which can take a keen edge, and that has been hardened to RC60-64 for maximum edge retention. The blade is held in position by a large bronze cap iron with an integrated palm rest which allows the plane to nestle snugly in the hand. The planes have a lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©
Block Planes
Made exclusively for Rutlands® by Luban, a world leader in hand plane manufacturing, these planes are a serious alternative to the premium brands that are produced in North America. The renowned design has a screw mechanism that easily allows the blade to be varied in depth relative to the sole to change the depth of cut.
Low Angle Block Plane
A block plane is small enough to be used in one hand and is designed for cutting end grain and making trimming or fine adjustment cuts. The low angle ensures that this block plane is especially good when used on end grain. The plane has a modified body casting to make it more responsive in use and a finer pitch blade adjustment thread for improved blade setting accuracy. An adjustable nosepiece allows the mouth to be opened or closed to accommodate coarse or ultra-fine shavings, this nosepiece is secured in place with a knurled brass knob. A 35mm wide, 25° bevelled blade is seated at 12° within the plane, giving an effective angle of 37° for end grain work. The plane has an overall length of 165mm and weighs 850g.
Low Angle Rebate Block Plane
A block plane is small enough to be used in one hand and is designed for cutting end grain and making trimming or fine adjustment cuts. This rebating block plane offers the end grain cutting capability of a low angle block plane and combines it with the flush cutting ability of a rebating plane. This gives a plane that will trim and finish end grain on difficult areas such as tenon shoulders. The plane has a modified body casting to make it more responsive in use and a finer pitch blade adjustment thread for improved blade setting accuracy. A 35mm wide, 25° bevelled blade is seated at 12° within the plane, giving an effective angle of 37° for end grain work. The plane has an overall length of 160mm and weighs 850g.
Materials & Manufacturing
The plane body features heavy, stress relieved ductile iron castings which are precision machined to ensure the soles are flat and square to the sides. The plane is fitted with a T10 high carbon steel tool blade which can take a keen edge, and that has been hardened to RC60-64 for maximum edge retention. The blade is held in position by a large bronze cap iron with an integrated palm rest which allows the plane to nestle snugly in the hand. The planes have a lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©
Made exclusively for Rutlands® by Luban, a world leader in hand plane manufacturing, these planes are a serious alternative to the premium brands that are produced in North America. The renowned design has a screw mechanism that easily allows the blade to be varied in depth relative to the sole to change the depth of cut.
Low Angle Block Plane
A block plane is small enough to be used in one hand and is designed for cutting end grain and making trimming or fine adjustment cuts. The low angle ensures that this block plane is especially good when used on end grain. The plane has a modified body casting to make it more responsive in use and a finer pitch blade adjustment thread for improved blade setting accuracy. An adjustable nosepiece allows the mouth to be opened or closed to accommodate coarse or ultra-fine shavings, this nosepiece is secured in place with a knurled brass knob. A 35mm wide, 25° bevelled blade is seated at 12° within the plane, giving an effective angle of 37° for end grain work. The plane has an overall length of 165mm and weighs 850g.
Low Angle Rebate Block Plane
A block plane is small enough to be used in one hand and is designed for cutting end grain and making trimming or fine adjustment cuts. This rebating block plane offers the end grain cutting capability of a low angle block plane and combines it with the flush cutting ability of a rebating plane. This gives a plane that will trim and finish end grain on difficult areas such as tenon shoulders. The plane has a modified body casting to make it more responsive in use and a finer pitch blade adjustment thread for improved blade setting accuracy. A 35mm wide, 25° bevelled blade is seated at 12° within the plane, giving an effective angle of 37° for end grain work. The plane has an overall length of 160mm and weighs 850g.
Materials & Manufacturing
The plane body features heavy, stress relieved ductile iron castings which are precision machined to ensure the soles are flat and square to the sides. The plane is fitted with a T10 high carbon steel tool blade which can take a keen edge, and that has been hardened to RC60-64 for maximum edge retention. The blade is held in position by a large bronze cap iron with an integrated palm rest which allows the plane to nestle snugly in the hand. The planes have a lifetime warranty and in the event that they should fail due to a material or manufacturing defect will be replaced free of charge. ©
Show more +
Specifications
Brand
Rutlands®
R1701
No 60 1/2 Low Angle Block Plane
R1701 Sole Length
165mm
R1701 Sole Width
44mm
R1701 Bed Angle
12°
R1701 Blade Angle
25°
R1701 Blade Thickness
3mm
R1701 Blade Width
35mm
R1701 Weight
0.85kg
R1702
No 60 1/2 Low Angle Rebate Block Plane
R1702 Sole Length
160mm
R1702 Sole Width
44mm
R1702 Bed Angle
12°
R1702 Blade Angle
25°
R1702 Blade Thickness
3mm
R1702 Blade Width
35mm
R1702 Weight
0.85kg
Show more +
0
5
Customer Reviews
Reviews (0)
Write Review....
No 9 1/2 Standard Angle Block Plane
No 9 1/2 Standard Angle & No 60 1/2 Low Angle Block Planes - Set of 2
No 60 1/2 Low Angle Block Plane
No 101 Bronze Block Plane
No 60 1/2 Low Angle & No 60 1/2 Low Angle Rebate Block Planes - Set of 2
Rutlands®
Part No. R1725
£139.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £14.99
- Saturday Next Day UK - £14.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process