Premium Woodthreading Kit
Premium Woodthreading Kit
£59.99
inc. vat
Home > More > Planing > Hand Planes > Wood Threading Kits > Premium Woodthreading Kit

Key Features

  • Lifetime Warranty
    If a component fails due to a material or manufacturing defect it will be replaced free of charge
  • Woodthreading Kit
    Designed for cutting both external and internal threads in wood
  • Multitude of Uses
    Producing homemade vices, clamps and jigs, childrens toys and furniture
  • Hardwood Thread Box
    Features two comfortable handles for easy exertion of pressure when cutting the threads
  • Steel Cutting Tool
    Accurately shaves the thread on the dowel
  • No Clogging
    A hole in the side of the thread box ensures there is no clogging and gives visibility of the cutting process
  • Steel Tap
    Creates a clean accurate internal thread which is perfect for the corresponding male thread
  • Kit Contents
    A screw box for cutting the male thread and a matching wood tap with tommy bar for producing the female thread

Show more +

Product Details

This kit is designed for cutting both external and internal threads in wood. It is commonly used for producing homemade vices, clamps and jigs, childrens toys and furniture. The kit contains a screw box for cutting the male thread and a matching wood tap with tommy bar for producing the female thread.

The thread box is made from hardwood and features two comfortable handles for easy exertion of pressure when cutting the threads. To create an external thread you simply clamp a piece of 19mm dowel in a vice, place the thread box over the dowel and gently rotate. The inner steel cutting tool then shaves the thread on the dowel. There is a wear resistant aluminium bushing for accurate dowel guidance and a hole in the side of the thread box to ensure there is no clogging and to give visibility of the cutting process.

To create a matching internal thread you pre drill a 16mm pilot hole in your timber, then insert the supplied steel tap and rotate by hand using the tommy bar. The tap creates a clean accurate internal thread which is perfect for the corresponding male thread. The resulting threads are both strong and tight fitting. The kit comes with a lifetime warranty - if it fails due to a material or manufacturing defect it will be replaced free of charge. ©
This kit is designed for cutting both external and internal threads in wood. It is commonly used for producing homemade vices, clamps and jigs, childrens toys and furniture. The kit contains a screw box for cutting the male thread and a matching wood tap with tommy bar for producing the female thread.

The thread box is made from hardwood and features two comfortable handles for easy exertion of pressure when cutting the threads. To create an external thread you simply clamp a piece of 19mm dowel in a vice, place the thread box over the dowel and gently rotate. The inner steel cutting tool then shaves the thread on the dowel. There is a wear resistant aluminium bushing for accurate dowel guidance and a hole in the side of the thread box to ensure there is no clogging and to give visibility of the cutting process.

To create a matching internal thread you pre drill a 16mm pilot hole in your timber, then insert the supplied steel tap and rotate by hand using the tommy bar. The tap creates a clean accurate internal thread which is perfect for the corresponding male thread. The resulting threads are both strong and tight fitting. The kit comes with a lifetime warranty - if it fails due to a material or manufacturing defect it will be replaced free of charge. ©

Show more +

Specifications

Brand Rutlands®
Thread 19mm
Length 260mm
Width 60mm

Show more +
5.000 4 5

Customer Reviews

Reviews (4)
Write Review....

John Walton

Extremely surprised at the effectiveness of the screw threader. Thread cuts are of very high quality. Not only does if look good but gives finish and screw action very smooth. Purchased two wooden pizza paddles, and pizza oven wire brush. All came without screw in wooden handles. I have made 3 screw in dowel handed for under £4.00. Suppliers in Italy wanted £70 for 3 handles. Rutland have done it again brilliant

Tony Schonfeld

I was really surprised at how easy it was to cut long, very crisp threads in some 19mm walnut dowel. A little lubricant (I used some finishing oil) and the thread box performed brilliantly. No problems at all with the tommy-bar driven tap either - it stayed in line even going through some relatively thin stock. My only issue is that the provided instruction sheet gives a drill size chart in imperial for the 5 sizes of kit. This one, the 3/4" kit, needs 19mm dowel and a 16mm drill (as stated in the online description). I'm so impressed I would be very interested in one of the larger sized kits if Rutland ever stock them.

A Keates

Super kit, easy to use straight from the box. I have made a few toys and wooden screws. Easy and quick to use. Super fast delivery.

Brian Webb

Great bit of kit, have used it to make several toys for my grandson, he loves to play with the wooden bolts that I have made. Gives well defined threads both internally and externally. I have used a battery drill to tap the holes instead of the supplied bar. Very pleased.

Show more +

Premium Woodthreading Kit

Rutlands®
Part No. R1650
£59.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £15.99
  • Saturday Next Day UK - £19.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >