Belt and Disc Sander
Belt and Disc Sander
£159.99
inc. vat
Home > More > Sanding > Belt & Disc Sanders > Belt and Disc Sander

Key Features

  • 3 Year Warranty
    If the sander fails due to a material or manufacturing defect it or its component will be replaced free of charge
  • Premium Performance Disc and Belt Sander
    Rapidly remove stock and leave a fine finish
  • Excellent for Sanding Hardwood, Softwoods and Composite Woods
    Work cross grain or end grain
  • 18kg Cast Iron Body for Structural Strength and Stiffness
    Ensures negligible levels of vibration
  • High Torque, Induction Motor
    Maintains constant speed under load and is very quiet
  • Micro Adjustment
    To set belt tension and tracking
  • Heavy Gauge Aluminium Disc
    Will not flex under pressure
  • Large Sanding Table
    Offers substantial workpiece support

Show more +

Bundles

Total: £189.98
This Item: Belt and Disc Sander
£159.99

Product Details

This disc and belt sander will rapidly remove stock and leave a fine finish on hardwood, softwoods and composite woods whether working cross grain or end grain. The 18kg body of the sander is made from cast iron for structural strength and stiffness ensuring negligible levels of vibration. The high torque, induction motor maintains a constant speed under load, is extremely quiet in operation and is operated by a no volt release switch.

The belt has a large sanding surface area and runs on two heavy duty steel rollers. A stop positions the workpiece at 90 to the sanding belt and the belt can be micro adjusted to set both tension and tracking. The arm of the belt can be tilted upright through 90 and sanding can be carried out in vertical mode. The 150mm sanding disc is primarily used when sanding smaller workpieces and working on end grain. The disc is made of 5mm thick aluminium plate, will not flex under pressure and accepts self-adhesive sanding discs. The large sanding table offers substantial workpiece support and can be locked-off from 0 to 45 using the calibrated scale. The mitre gauge has a graduated scale of +/- 60 and when used in conjunction with the table allows for sanding bevels, mitres and compound mitres.

A 63mm dust port ensures that dust can be drawn from both belt and disc at the point of dust source, enhancing the finish of the workpiece. Supplied with one 80g sanding belt and one 80g sanding disc. This belt and disc sander has a 3 year warranty, should the sander fail due to a material or manufacturing defect it or its component will be replaced free of charge.
This disc and belt sander will rapidly remove stock and leave a fine finish on hardwood, softwoods and composite woods whether working cross grain or end grain. The 18kg body of the sander is made from cast iron for structural strength and stiffness ensuring negligible levels of vibration. The high torque, induction motor maintains a constant speed under load, is extremely quiet in operation and is operated by a no volt release switch.

The belt has a large sanding surface area and runs on two heavy duty steel rollers. A stop positions the workpiece at 90 to the sanding belt and the belt can be micro adjusted to set both tension and tracking. The arm of the belt can be tilted upright through 90 and sanding can be carried out in vertical mode. The 150mm sanding disc is primarily used when sanding smaller workpieces and working on end grain. The disc is made of 5mm thick aluminium plate, will not flex under pressure and accepts self-adhesive sanding discs. The large sanding table offers substantial workpiece support and can be locked-off from 0 to 45 using the calibrated scale. The mitre gauge has a graduated scale of +/- 60 and when used in conjunction with the table allows for sanding bevels, mitres and compound mitres.

A 63mm dust port ensures that dust can be drawn from both belt and disc at the point of dust source, enhancing the finish of the workpiece. Supplied with one 80g sanding belt and one 80g sanding disc. This belt and disc sander has a 3 year warranty, should the sander fail due to a material or manufacturing defect it or its component will be replaced free of charge.

Show more +

Specifications

Brand Rutlands
Voltage 230V
Power 370W
Torque High
No Load Speed 2850rpm
Belt Size 100mm x 914mm
Disc Size 150mm
Weight 18kg

Show more +
4.833 12 5

Customer Reviews

Reviews (12)
Write Review....

Mark G

Interesting use of the word premium. The table attachment doesn't and won't sit square to the sanding disk face so the sliding square is useless.

Very disappointing.

Michael Stanley

Solid machine, doesn't need to be fixed to the bench to be used so with a small workshop like mine I can just slide it out of the way when not needed. As for the sanding results, can't fault it at all, a powerful, efficient and accurate sander that's ideal for flat sanding and external curves. Thanks Rutlands for the continuous swift delivery and superb service, I'm glad I stumbled across you by chance on the internet.

Graham Williams

I came across this almost by chance, just as I was about to buy a slightly cheaper machine from Screwfix. I am glad I webnt with this machine. Delivery was prompt and I knoew I had made the right decision, just carrying the box to the work shop (very heavy). It is easy to set up and use. Although it suggests benck mounting, I think this unnecessary as it is of such weight, that it won't move and I simply lift it onto the work bench when I need it. The table for the disc sander is a bit flimsy, but it does the job unless you are working on big pieces for long periods. The belt sander is smooth and the whole thing surprisingly quiet. The dust extractor nozzle takes the same size attachment as my Trend router table and dust extraction is good.

Chris

This sander is great value for money. However it is important to spend a few minutes setting the machine up correctly. Previous comments about the drive belt failure are probably correct. Mine was very loose and would have failed without being re-tensioned. Oddly this is not a task covered in the manual, but easy to see how to do it once you have the cover off. The sanding belt is easy to change as is raising the carriage to vertical. Very little vibration in use and does not really need to be bolted down. Velcro discs would be sensible upgrade.

Albert Miles

Have only recently received it, but so far it is performing very well. The 24 hour delivery was excellent.

Ian Duncan

Took delivery of mine within two working days of ordering it after buying and returning a similarly priced Clarke model from Machine Mart that was so poorly made it should never have been on sale.

When I got this one out of the box and saw how it all bolted together (a two minute job, no hassle) it looked very similar to the Clarke effort so I didn't have high hopes. I was wrong. It's an absolutely fine machine - runs smooth, good motor, accurate adjustment and the tasble holds firm in use. That last one is the most importmant for me, if I want to sand at 90 degrees I want it to actually be 90 degrees, not 93 or 87. I gor perfect 90 degree angles every time.

If you're budget is tight and you need a sander I doubt there's a better one on the market at this price.

All else being equal, this will do everything you want, do it well and do it for a chunk less money than any other machine of similar capabilities.

Recommended.

Christopher Norris

Bought when the reduced price offer was on. Machine arrived and worked straight out of the box. Cannot fault it, it worked perfectly. The weight keeps the sander secure on the bench and haven't had to bolt it down. Very pleased

Mr K Peters

I am very happy with the performance of my new sander. It's nice and heavy and simple to operate. Great value.

James Carter

Really pleased with this sander. It is very solid and stays put in use. Easy belt changeover and simple to track. Well worth the money.

Peter Driscol

I turn a lot of pens and pencils and needed a machine that could square up the blanks and remove cutting marks. I must use this sander more than any other tool and it has never failed me. The only down side is having to remove the glue residue each time you change discs.

J.D.T

For all standard sanding jobs this sander performs a treat. It's simple design means nothing goes wrong. Changing and aligning belts is a breeze and when you connect to a dust collector you can see what your sanding. Glad I bought it.

P Rodgers

Very pleased with this sander. The motor is really powerful and you struggle to stall the belt even when you exert to much force. Nice and solid machine that does exactly what I wanted it to.

Show more +

Belt and Disc Sander

Rutlands
Part No. R7605
£159.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £14.99
  • Saturday Next Day UK - £14.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >