Premium Brad Finish Nailer - 18g
Premium Brad Finish Nailer - 18g
£129.99
inc. vat
Home > Nailing > Nailers > Air Nailers > Premium Brad Finish Nailer - 18g

Key Features

  • Lifetime Warranty
    If the nailer fails due to a material or manufacturing defect the component will be replaced free of charge
  • Premium 18g Brad Nailer
    For furniture production and assembly, finish and decorative trim work and fine cabinet making
  • 18g Pins have Greater Pull-Out Resistance and Overall Strength than Headless 23g Pins
    Excellent for cabinet making where a stronger construction is required to resist loading
  • 18g Brads Measure 1.0mm in Diameter
    They displace minimal material allowing you to drive tight up to an edge without risk of splitting the wood
  • Precision Machined Cylinder & Piston Valve
    Squeezing the trigger results in ultra-smooth and exceptionally powerful firing of the driving pin
  • Virtually No Kick Back in the Hand
    Even when firing into exotic hardwoods with 50mm pins
  • Precision Engineering Tolerances on the Nose of the Nailer
    Ensure for a near jam-free operation

Show more +

Bundles

Product Details

This is a premium 18g brad nailer designed for furniture production and assembly, finish and decorative trim work and fine cabinet making. 18g pins have greater pull-out resistance and overall strength than headless 23g pins so they are excellent for cabinet making where a stronger construction is required to resist loading. The 18g brads measure 1.0mm in diameter and have fine heads that displace minimal material allowing you to drive tight up to an edge without risk of splitting the wood.

Unlike other brad nailers, this nailer features a precision machined cylinder and piston valve, which when you squeeze the trigger results in ultra-smooth and exceptionally powerful firing of the driving pin. There is virtually no kick back in the hand, even when firing into exotic hardwoods with 50mm pins, leaving a fractional hole that can simply be filled.

The side loading magazine is easy to fill and is made from machined aluminium, accepting 18 gauge nails, measuring 19mm, 25mm, 32mm, 38mm and 50mm in length. A swivel coupling prevents the hose from tangling and interfering with the work piece. The brad nailer operates at 5 to 7 bar pressure and can be used up to 8 bar when firing brads into dense hardwoods. The narrow nose design allows for access to tight areas and angles, and the soft polymer tip prevents marring of contoured faces. Precision engineering tolerances on the nose of the brad nailer ensure for a near jam-free operation and tool longevity, and in the event of a jam the front nose has a quick release mechanism to allow for fast access and nail removal. As a safety feature, the firing mechanism will not operate until the nose of the nailer is depressed on the work piece.

When you use this brad nailer for the first time you will truly appreciate its premium quality. Simply squeeze the trigger and with minimal levels of recoil the brad is delivered precisely where you want into the work piece. Supplied with carry case, lubricating oil, safety glasses and hex keys, and comes with a lifetime warranty that in the event the finish nailer fails due to a material or manufacturing defect the component will be replaced free of charge.
This is a premium 18g brad nailer designed for furniture production and assembly, finish and decorative trim work and fine cabinet making. 18g pins have greater pull-out resistance and overall strength than headless 23g pins so they are excellent for cabinet making where a stronger construction is required to resist loading. The 18g brads measure 1.0mm in diameter and have fine heads that displace minimal material allowing you to drive tight up to an edge without risk of splitting the wood.

Unlike other brad nailers, this nailer features a precision machined cylinder and piston valve, which when you squeeze the trigger results in ultra-smooth and exceptionally powerful firing of the driving pin. There is virtually no kick back in the hand, even when firing into exotic hardwoods with 50mm pins, leaving a fractional hole that can simply be filled.

The side loading magazine is easy to fill and is made from machined aluminium, accepting 18 gauge nails, measuring 19mm, 25mm, 32mm, 38mm and 50mm in length. A swivel coupling prevents the hose from tangling and interfering with the work piece. The brad nailer operates at 5 to 7 bar pressure and can be used up to 8 bar when firing brads into dense hardwoods. The narrow nose design allows for access to tight areas and angles, and the soft polymer tip prevents marring of contoured faces. Precision engineering tolerances on the nose of the brad nailer ensure for a near jam-free operation and tool longevity, and in the event of a jam the front nose has a quick release mechanism to allow for fast access and nail removal. As a safety feature, the firing mechanism will not operate until the nose of the nailer is depressed on the work piece.

When you use this brad nailer for the first time you will truly appreciate its premium quality. Simply squeeze the trigger and with minimal levels of recoil the brad is delivered precisely where you want into the work piece. Supplied with carry case, lubricating oil, safety glasses and hex keys, and comes with a lifetime warranty that in the event the finish nailer fails due to a material or manufacturing defect the component will be replaced free of charge.

Show more +

Specifications

Brand Rutlands
Brad Nail Gauge 18g
Brad Nail Diameter 1.0mm
Brad Nail Lengths 19, 25, 32, 38 and 50mm
Bar Pressure 5 to 7 bar
Magazine Capacity 100 Brads

Show more +
5.000 1 5

Customer Reviews

Reviews (1)
Write Review....

Paul Winters

I use this finish nailer for assembling kitchen cabinets made from tulip wood. The trigger action is very smooth and overall the nailer is nicely balanced in the hand. You have good sight of the nailing point, unlike on my Paslode where you have to guess where the nail would end up. You can drive brads really close to the edge and so far none have burst out. Its more of a cabinet makers nailer rather than a second fix nailer and i am more than pleased that i bought it.

Show more +

Premium Brad Finish Nailer - 18g

Rutlands
Part No. R7013
£129.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £14.99
  • Saturday Next Day UK - £14.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >