TCT Router Bit - Reversible Rail & Stile - D=41.3mm H=23.8mm R=6.35mm P=6.35mm S=1/4"
TCT Router Bit - Reversible Rail & Stile - D=41.3mm H=23.8mm R=6.35mm P=6.35mm S=1/4"
£49.99
inc. vat
Home > Power Tool Accessories > Router Bits > Reversible Rail & Stile Bits > TCT Router Bit - Reversible Rail & Stile - D=41.3mm H=23.8mm R=6.35mm P=6.35mm S=1/4"

Key Features

  • Tungsten Carbide Tips
    To ensure a razor-sharp cutting edge to achieve maximum surface finish quality
  • 10 to 15 Shear Angle
    Tungsten cutting edges remain in constant contact with the workpiece to provide a softer, chatter free cut
  • Perfectly Balanced Machined Steel Bodies
    Reduce vibration for maximum control, producing a smoother cut and providing a longer bit life
  • Anti Kick Back Design
    Allows you work safely in accordance with German DIN standards
  • High Grade Micro-Grain Carbide Tips
    Excellent wear and impact resistance, retaining hardness when routing at high temperatures from fast cutting speeds
  • TCT Tips Brazed by Induction
    The tips are attached by induction creating an extremely strong joint, holding under the immense stress caused when routing

Show more +

Bundles

Product Details

These reversible rail & stile TCT router bits are the most economical way of producing quality rail & stile joints when creating frames for raised panel doors and cabinets. The slot cutter, profile cutter and bearing can be assembled on the shaft in two different arrangements in order to cut both the rail & stile profile, with a standard sized 6.35mm groove for fitting raised panel edges.

These bits are offered in a choice of elegant profiles along the moulded inside edge including ogee and ovolo, enhancing the look of your kitchen cabinets and cupboards. Used in conjunction with our wide selection of raised panel bits, you can create elegant custom cabinet and kitchen doors, with plain or decorative moulded panels. Panels must be of a suitable thickness in order to provide a secure joint, the edges of your panels can be either rebated on one or both sides or raised on the front face. Minimum wood thickness for this bit is 15.9mm and the maximum thickness is 22.2mm.

Featuring perfectly balanced machined steel bodies for reduced vibration and smoother cuts, and micro-grain tungsten carbide tipped blades for long lasting sharpness and hardness. Available in 1/4" or 1/2" shanks these bits are for router table use only.

Our professional range of router bits are suitable for use on softwoods, hardwoods, MDF, plywood and chipboard.

The bits are designed in anti kick back style in accordance with strict German DIN standards to ensure maximum operator safety. The 10 to 15 degree shear angle means that the tungsten cutting edges remain in constant contact with the workpiece to provide a softer, chatter free cut. The bits feature right hook angles which guarantee a smooth cut due to the super fast removal of the chips. Combine these benefits with the hard wearing micro grain carbide tips and the perfectly balanced machined steel bodies and you have a premium quality, premium performance router cutter at a realistic price level. Highly recommended by Rutlands for discerning home woodworkers, fine cabinet makers, joiners and kitchen fitters.
These reversible rail & stile TCT router bits are the most economical way of producing quality rail & stile joints when creating frames for raised panel doors and cabinets. The slot cutter, profile cutter and bearing can be assembled on the shaft in two different arrangements in order to cut both the rail & stile profile, with a standard sized 6.35mm groove for fitting raised panel edges.

These bits are offered in a choice of elegant profiles along the moulded inside edge including ogee and ovolo, enhancing the look of your kitchen cabinets and cupboards. Used in conjunction with our wide selection of raised panel bits, you can create elegant custom cabinet and kitchen doors, with plain or decorative moulded panels. Panels must be of a suitable thickness in order to provide a secure joint, the edges of your panels can be either rebated on one or both sides or raised on the front face. Minimum wood thickness for this bit is 15.9mm and the maximum thickness is 22.2mm.

Featuring perfectly balanced machined steel bodies for reduced vibration and smoother cuts, and micro-grain tungsten carbide tipped blades for long lasting sharpness and hardness. Available in 1/4" or 1/2" shanks these bits are for router table use only.

Our professional range of router bits are suitable for use on softwoods, hardwoods, MDF, plywood and chipboard.

The bits are designed in anti kick back style in accordance with strict German DIN standards to ensure maximum operator safety. The 10 to 15 degree shear angle means that the tungsten cutting edges remain in constant contact with the workpiece to provide a softer, chatter free cut. The bits feature right hook angles which guarantee a smooth cut due to the super fast removal of the chips. Combine these benefits with the hard wearing micro grain carbide tips and the perfectly balanced machined steel bodies and you have a premium quality, premium performance router cutter at a realistic price level. Highly recommended by Rutlands for discerning home woodworkers, fine cabinet makers, joiners and kitchen fitters.

Show more +

Specifications

Brand Rutlands
D 41.3mm
H 23.8mm
R 6.35mm
P 6.35mm
S 1/4"

Show more +
0 5

Customer Reviews

Reviews (0)
Write Review....

Show more +

TCT Router Bit - Reversible Rail & Stile - D=41.3mm H=23.8mm R=6.35mm P=6.35mm S=1/4"

Rutlands
Part No. TR431
£49.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • 1st Class Mail UK (Orders below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £14.99
  • Saturday Next Day UK - £14.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >