Premium Steel Triple Pocket Hole Jig
Premium Steel Triple Pocket Hole Jig
£99.99
inc. vat

Key Features

  • Lifetime Warranty
    If any pocket hole jig fails due to a material or manufacturing defect it will be replaced free of charge
  • Triple Pocket Hole Jig
    Use 3 holes for an extra strong joint, 2 side by side holes for narrow stock or 2 outer holes for a standard pocket joint
  • Drill Block Made from Machined Tool-Steel
    No drill guide bushes required
  • Three Holes Will Not Wear Over Time
    Resulting in consistent angled drilling year after year
  • Vary the Clamping Pressure
    To prevent damage or crushing of the timber fibres
  • Vacuum Port Held by Four Rare Earth Magnets
    Offers effective dust removal and improved drilling performance
  • Beautifully Finished
    In black electro-coating

Show more +

Bundles

Total: £154.96

Product Details

This pocket hole jig is quite exceptional, both in terms of its design and of build quality. It is the only pocket hole jig that features a triple bored drill block, which is made from machined tool-steel, that is ultra precise and abrasion resistant. Unlike conventional jigs that require threaded steel inserts to guide the drill bit, this jig does not need inserts and as such drilling is more precise. As the drilling block is made from an abrasion resistant tool-steel the three holes will not wear over time, resulting in consistent angled drilling year after year. With this triple pocket hole jig you can use all three pocket holes on one joint for maximum joint strength, or you can use the two outer holes to make a conventional pocket hole joint. Alternatively, you can use the two side by side holes to make a pocket hole joint on narrow stock. You can space the between centre hole distances at 15mm, 20mm or 35mm.

The work clamp is easily applied using the large lever, and you can vary the clamping pressure subject to the density of your wood to prevent damage or crushing of the timber fibres. The rubber face of the clamp features a ribbed design, which strengthens the grip on the workpiece without causing surface damage. A series of four holes in the base allow you to mount the jig directly to your work bench for maximum stability. A vacuum port held in position by four rare earth magnets offers effective dust removal and improved drilling performance when connected to a vacuum. A 38mm diameter x 60° dust hose coupling fitting allows you to connect to industry standard dust hoses.

Set up is incredibly simple. To set the height of the drilling block you measure the width of your wood and then raise the drill block by the width of the wood, using the graduated metric scale machined on the side of the drilling block. The scale reads from 12mm through to 45mm. This kit contains the jig, 2 x HSS stepped drill bits, depth collar, square driver bit, pozi driver bit, a selection of coloured plugs, a magnetic vacuum port and 60° hose coupling. This is our premium performance triple pocket hole jig, beautifully finished in black electro-coating and comes with a lifetime warranty, in the event it fails due to a manufacturing or material defect it will be replaced free of charge. ©
This pocket hole jig is quite exceptional, both in terms of its design and of build quality. It is the only pocket hole jig that features a triple bored drill block, which is made from machined tool-steel, that is ultra precise and abrasion resistant. Unlike conventional jigs that require threaded steel inserts to guide the drill bit, this jig does not need inserts and as such drilling is more precise. As the drilling block is made from an abrasion resistant tool-steel the three holes will not wear over time, resulting in consistent angled drilling year after year. With this triple pocket hole jig you can use all three pocket holes on one joint for maximum joint strength, or you can use the two outer holes to make a conventional pocket hole joint. Alternatively, you can use the two side by side holes to make a pocket hole joint on narrow stock. You can space the between centre hole distances at 15mm, 20mm or 35mm.

The work clamp is easily applied using the large lever, and you can vary the clamping pressure subject to the density of your wood to prevent damage or crushing of the timber fibres. The rubber face of the clamp features a ribbed design, which strengthens the grip on the workpiece without causing surface damage. A series of four holes in the base allow you to mount the jig directly to your work bench for maximum stability. A vacuum port held in position by four rare earth magnets offers effective dust removal and improved drilling performance when connected to a vacuum. A 38mm diameter x 60° dust hose coupling fitting allows you to connect to industry standard dust hoses.

Set up is incredibly simple. To set the height of the drilling block you measure the width of your wood and then raise the drill block by the width of the wood, using the graduated metric scale machined on the side of the drilling block. The scale reads from 12mm through to 45mm. This kit contains the jig, 2 x HSS stepped drill bits, depth collar, square driver bit, pozi driver bit, a selection of coloured plugs, a magnetic vacuum port and 60° hose coupling. This is our premium performance triple pocket hole jig, beautifully finished in black electro-coating and comes with a lifetime warranty, in the event it fails due to a manufacturing or material defect it will be replaced free of charge. ©

Show more +

Specifications

Brand Rutlands®
Weight 3kg
Length 280mm
Width 60mm
Height 106mm
Clamping Capacity 12mm to 45mm
Bit Length 180mm
Distance Between Holes 15mm, 20mm and 35mm

Show more +
5.000 3 5

Customer Reviews

Reviews (3)
Write Review....

James Smithurst

Produces very clean sided holes. Easy to adjust for different wood widths and the clamp locks the wood rigidly in position. Used on tulip wood when making a built in wardrobe and it did not let me down once. Previously had a budget plastic body jig and the holes were never true and it ended up costing me money on wasted wood. This one doesn't need clamping down as it's quite heavy and stays put on the bench when drilling

Alan Bacon

Quality is evident as soon as the jig is taken out of the box. It is very weighty and has a super smooth clamping mechanism. Nice array of bits and bobs such as plugs, screws and drivers to go with the jig to get started.

Sam Muggington

I have used this daily for over a month now and there is no sign on the bushes wearing away, because guess what, there are none to wear away. This was always a pet hate of mine with other jigs, if the quality was poor then the bushes would wear leading to a sloppily drilled hole. 5 star product for that reason alone.

Show more +

Premium Steel Triple Pocket Hole Jig

Rutlands®
Part No. R6043
£99.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £14.99
  • Saturday Next Day UK - £14.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >