STC Router Bit - Spiral Down Cut O Flute - D=6.35mm H=19mm L=63.5mm S=1/4"
STC Router Bit - Spiral Down Cut O Flute - D=6.35mm H=19mm L=63.5mm S=1/4"
£29.99
inc. vat
Home > Router Bits > STC Router Bits > STC Acrylic Bits > STC Router Bit - Spiral Down Cut O Flute - D=6.35mm H=19mm L=63.5mm S=1/4"

Key Features

  • Lifetime Warranty
    If any bit fails due to a material or manufacturing defect it will be replaced free of charge
  • Spiral Down Cut O Flute
    Single polished flute that aids with chip clearance and leaves the best finish on the top of workpieces
  • Single Flute
    Used on plastic and aluminium projects to offer faster cutting rates
  • Micro-Grain Solid Tungsten Carbide
    Longest tool life and edge retention for the ultimate finish
  • Precision Ground
    From a single piece of solid tungsten carbide
  • Efficient Chip Ejection
    Spiral profile ensures the chips are removed quickly and away from the workpiece
  • Optimum Cutting Angle
    Ensures the wood is sheared cleanly
  • Bits Run Cooler During Use
    As solid carbide dissipates heat more uniformly meaning the edges remain as sharp as possible and are retained for longer

Show more +

Bundles

Total: £79.97
This Item: STC Router Bit - Spiral Down Cut O Flute - D=6.35mm H=19mm L=63.5mm S=1/4"
£29.99

Product Details

STC Router Bits
Each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. This ultimate micro-grain carbide formulation gives the longest tool life and edge retention ensuring a very clean and accurate cut that leads to the ultimate finish.

Spiral Down Cut O Flute Bits
Spiral down cut o flute bits are used on plastic and aluminium projects. The bits have a single polished flute which aids with chip clearance, give a consistent feed rate and leave a clean finish. The single flute means the bits offer faster cutting and work well with plastics that have a low melting point. The down-cut design pushes chips down and away from the machine to provide a finer top surface finish.

Superior Finish and Performance
Each spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety and each bit has a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
STC Router Bits
Each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. This ultimate micro-grain carbide formulation gives the longest tool life and edge retention ensuring a very clean and accurate cut that leads to the ultimate finish.

Spiral Down Cut O Flute Bits
Spiral down cut o flute bits are used on plastic and aluminium projects. The bits have a single polished flute which aids with chip clearance, give a consistent feed rate and leave a clean finish. The single flute means the bits offer faster cutting and work well with plastics that have a low melting point. The down-cut design pushes chips down and away from the machine to provide a finer top surface finish.

Superior Finish and Performance
Each spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety and each bit has a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©

Show more +

Specifications

Brand Rutlands®
D 6.35mm
H 19mm
L 63.5mm
n.max 24,000
S 1/4"

Show more +
0 5

Customer Reviews

Reviews (0)
Write Review....

Show more +

STC Router Bit - Spiral Down Cut O Flute - D=6.35mm H=19mm L=63.5mm S=1/4"

Rutlands®
Part No. R5886
£29.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £15.99
  • Saturday Next Day UK - £19.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >