Solid Carbide Coated - Spiral Compression 2 Flute
£49.99
inc. vat
Home > Router Bits > STC Router Bits > STC DLC Chrome Coated Router Bits > Solid Carbide Coated - Spiral Compression 2 Flute
Key Features
- Lifetime Warranty
If any bit fails due to a material or manufacturing defect it will be replaced free of charge - Spiral Compression Two Flute Bits
Provide both up and down shear cutting edges on the same bit, ensuring an ultra fine finish on both faces - DLC Chrome Coated
Diamond like carbon coating ensures bits last 3 times longer than uncoated - Micro-Grain Solid Tungsten Carbide
Longest tool life and edge retention for the ultimate finish - Precision Ground
From a single piece of solid tungsten carbide - Efficient Chip Ejection
Spiral profile ensures the chips are removed quickly and away from the workpiece - Optimum Cutting Angle
Ensures the wood is sheared cleanly - Bits Run Cooler During Use
As solid carbide dissipates heat more uniformly meaning the edges remain as sharp as possible and are retained for longer
Product Details
STC DLC Chrome Coated Router Bits
The diamond like carbon (DLC) coating is a hard and durable hybridized carbon, SP2 graphite and SP3 diamond surface finish that ensures the bits last 3 times longer than uncoated bits. The coating gives the lowest coefficient of friction which reduces sticking and makes the bits ideal for high speed nesting applications. The coating has minimal thickness of µ 1-3 which guarantees the edges of the bits are perfectly sharp and has a Vickers hardness of HV 2,500 which gives ultimate protection against wear and tear. The bits avoid excessive heat build up which would affect performance. Prior to being coated each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. These STC DLC chrome coated router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.
Spiral Compression Two Flute Bits
Spiral compression two flute bits feature both up and down shear cutting edges on the same bit. This combination provides down-cutting on the top faces of material and up-cutting on the bottom. This action pulls fibres towards the centre of the board, eliminating tearing & chipping, whilst ensuring an ultra fine finish on both faces. These bits are ideal for double faced veneered, laminated & melamine boards and other abrasive material.
Superior Finish and Performance
Each spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety and each bit has a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
The diamond like carbon (DLC) coating is a hard and durable hybridized carbon, SP2 graphite and SP3 diamond surface finish that ensures the bits last 3 times longer than uncoated bits. The coating gives the lowest coefficient of friction which reduces sticking and makes the bits ideal for high speed nesting applications. The coating has minimal thickness of µ 1-3 which guarantees the edges of the bits are perfectly sharp and has a Vickers hardness of HV 2,500 which gives ultimate protection against wear and tear. The bits avoid excessive heat build up which would affect performance. Prior to being coated each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. These STC DLC chrome coated router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.
Spiral Compression Two Flute Bits
Spiral compression two flute bits feature both up and down shear cutting edges on the same bit. This combination provides down-cutting on the top faces of material and up-cutting on the bottom. This action pulls fibres towards the centre of the board, eliminating tearing & chipping, whilst ensuring an ultra fine finish on both faces. These bits are ideal for double faced veneered, laminated & melamine boards and other abrasive material.
Superior Finish and Performance
Each spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety and each bit has a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
STC DLC Chrome Coated Router Bits
The diamond like carbon (DLC) coating is a hard and durable hybridized carbon, SP2 graphite and SP3 diamond surface finish that ensures the bits last 3 times longer than uncoated bits. The coating gives the lowest coefficient of friction which reduces sticking and makes the bits ideal for high speed nesting applications. The coating has minimal thickness of µ 1-3 which guarantees the edges of the bits are perfectly sharp and has a Vickers hardness of HV 2,500 which gives ultimate protection against wear and tear. The bits avoid excessive heat build up which would affect performance. Prior to being coated each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. These STC DLC chrome coated router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.
Spiral Compression Two Flute Bits
Spiral compression two flute bits feature both up and down shear cutting edges on the same bit. This combination provides down-cutting on the top faces of material and up-cutting on the bottom. This action pulls fibres towards the centre of the board, eliminating tearing & chipping, whilst ensuring an ultra fine finish on both faces. These bits are ideal for double faced veneered, laminated & melamine boards and other abrasive material.
Superior Finish and Performance
Each spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety and each bit has a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
The diamond like carbon (DLC) coating is a hard and durable hybridized carbon, SP2 graphite and SP3 diamond surface finish that ensures the bits last 3 times longer than uncoated bits. The coating gives the lowest coefficient of friction which reduces sticking and makes the bits ideal for high speed nesting applications. The coating has minimal thickness of µ 1-3 which guarantees the edges of the bits are perfectly sharp and has a Vickers hardness of HV 2,500 which gives ultimate protection against wear and tear. The bits avoid excessive heat build up which would affect performance. Prior to being coated each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. These STC DLC chrome coated router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.
Spiral Compression Two Flute Bits
Spiral compression two flute bits feature both up and down shear cutting edges on the same bit. This combination provides down-cutting on the top faces of material and up-cutting on the bottom. This action pulls fibres towards the centre of the board, eliminating tearing & chipping, whilst ensuring an ultra fine finish on both faces. These bits are ideal for double faced veneered, laminated & melamine boards and other abrasive material.
Superior Finish and Performance
Each spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety and each bit has a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
Show more +
Specifications
R5410
D=4mm H=16mm n.max=24,000 S=4mm
R5411
D=5mm H=20mm n.max=24,000 S=5mm
R5412
D=6mm H=25mm n.max=24,000 S=6mm
R5413
D=8mm H=32mm n.max=24,000 S=8mm
R5414
D=10mm H=32mm n.max=24,000 S=10mm
R5415
D=12mm H=42mm n.max=24,000 S=12mm
R5416
D=12.7mm H=25mm n.max=24,000 S=1/2"
Show more +
0
5
Customer Reviews
Reviews (0)
Write Review....
Solid Carbide Coated - Spiral Compression 2 Flute - D=4mm H=16mm S=4mm
Solid Carbide Coated - Spiral Compression 2 Flute - D=5mm H=20mm S=5mm
Solid Carbide Coated - Spiral Compression 2 Flute - D=6mm H=25mm S=6mm
Solid Carbide Coated - Spiral Compression 2 Flute - D=8mm H=32mm S=8mm
Solid Carbide Coated - Spiral Compression 2 Flute - D=10mm H=32mm S=10mm
Solid Carbide Coated - Spiral Compression 2 Flute - D=12mm H=42mm S=12mm
Solid Carbide Coated - Spiral Compression 2 Flute - D=12.7mm H=35mm S=1/2"
£49.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process