Solid Carbide - Engraver - D=6.35mm Tip= 0.5mm H=11mm A=30° L=51mm S=1/4"
£39.99
inc. vat
Home > Router Bits > STC Router Bits > STC Router Bits > Engraver > Solid Carbide - Engraver - D=6.35mm Tip= 0.5mm H=11mm A=30° L=51mm S=1/4"
Key Features
- Lifetime Warranty
If any bit fails due to a material or manufacturing defect it will be replaced free of charge - Engraving Bits
Defined 'V' pointed profile is perfect for lettering and engraving required - Micro-Grain Solid Tungsten Carbide
Longest tool life and edge retention for the ultimate finish - Precision Ground
From a single piece of solid tungsten carbide - Optimum Cutting Angle
Ensures the wood is sheared cleanly - Bits Run Cooler During Use
As solid carbide dissipates heat more uniformly meaning the edges remain as sharp as possible and are retained for longer
Bundles
This Item: Solid Carbide - Engraver - D=6.35mm Tip= 0.5mm H=11mm A=30° L=51mm S=1/4"
£39.99
Grip Blocks - Pack of 12
£39.99
Product Details
STC Router Bits
Each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. This ultimate micro-grain carbide formulation gives the longest tool life and edge retention ensuring a very clean and accurate cut that leads to the ultimate finish. These STC router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.
Engraver
Engraving bits are perfect for lettering and engraving because of the defined 'V' pointed profile the bit produces. The single fluted design is ideal for fine work and can be used for engraving plastics and man made materials as well as hardwoods and softwoods. Can be used in handheld or CNC routers.
Superior Finish and Performance
Each bit has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety and each bit has a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
Each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. This ultimate micro-grain carbide formulation gives the longest tool life and edge retention ensuring a very clean and accurate cut that leads to the ultimate finish. These STC router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.
Engraver
Engraving bits are perfect for lettering and engraving because of the defined 'V' pointed profile the bit produces. The single fluted design is ideal for fine work and can be used for engraving plastics and man made materials as well as hardwoods and softwoods. Can be used in handheld or CNC routers.
Superior Finish and Performance
Each bit has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety and each bit has a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
STC Router Bits
Each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. This ultimate micro-grain carbide formulation gives the longest tool life and edge retention ensuring a very clean and accurate cut that leads to the ultimate finish. These STC router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.
Engraver
Engraving bits are perfect for lettering and engraving because of the defined 'V' pointed profile the bit produces. The single fluted design is ideal for fine work and can be used for engraving plastics and man made materials as well as hardwoods and softwoods. Can be used in handheld or CNC routers.
Superior Finish and Performance
Each bit has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety and each bit has a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
Each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. This ultimate micro-grain carbide formulation gives the longest tool life and edge retention ensuring a very clean and accurate cut that leads to the ultimate finish. These STC router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.
Engraver
Engraving bits are perfect for lettering and engraving because of the defined 'V' pointed profile the bit produces. The single fluted design is ideal for fine work and can be used for engraving plastics and man made materials as well as hardwoods and softwoods. Can be used in handheld or CNC routers.
Superior Finish and Performance
Each bit has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety and each bit has a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
Show more +
Specifications
Brand
Rutlands®
D
6.35mm
H
11mm
A
30°
Tip
0.5mm
L
51mm
n.max
24,000
S
1/4"
Show more +
5.000
1
5
Customer Reviews
Reviews (1)
Write Review....
Solid Carbide - Engraver - D=6.35mm Tip= 0.5mm H=11mm A=30° L=51mm S=1/4"
Rutlands®
Part No. R5864
£39.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process
Very clean cut with no real sanding to the edges needed.