Solid Carbide - Spiral Down Cut 2 Flute
£19.99
inc. vat
Home > Router Bits > STC Router Bits > STC Router Bits > Spiral Down Cut Two Flute > Solid Carbide - Spiral Down Cut 2 Flute
Key Features
- Lifetime Warranty
If any bit fails due to a material or manufacturing defect it will be replaced free of charge - Spiral Down Cut Two Bits
Used to push chips down and away from the machine to eliminate splintering and tearout, and provide the finest top surface finish - Micro-Grain Solid Tungsten Carbide
Longest tool life and edge retention for the ultimate finish - Precision Ground
From a single piece of solid tungsten carbide - Efficient Chip Ejection
Spiral profile ensures the chips are removed quickly and away from the workpiece - Optimum Cutting Angle
Ensures the wood is sheared cleanly - Bits Run Cooler During Use
As solid carbide dissipates heat more uniformly meaning the edges remain as sharp as possible and are retained for longer
Product Details
STC Router Bits
Each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. This ultimate micro-grain carbide formulation gives the longest tool life and edge retention ensuring a very clean and accurate cut that leads to the ultimate finish. These STC router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.
Spiral Down Cut Two Flute Bits
Spiral down cut two flute bits are used to push chips down and away from the machine to eliminate splintering and tearout, and provide the finest top surface finish. The down-cut geometry of the bits also works to hold the workpiece in place when used with CNC machines and handheld routers. These bits are ideal for cutting shallow dados, rabbets, and visible slots due to the clean finish provided on the edge of the hole or groove. When used for pattern routing or cutting through material, these bits allow clear vision of the cutting line to be maintained.
Superior Finish and Performance
Each spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety and each bit has a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
Each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. This ultimate micro-grain carbide formulation gives the longest tool life and edge retention ensuring a very clean and accurate cut that leads to the ultimate finish. These STC router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.
Spiral Down Cut Two Flute Bits
Spiral down cut two flute bits are used to push chips down and away from the machine to eliminate splintering and tearout, and provide the finest top surface finish. The down-cut geometry of the bits also works to hold the workpiece in place when used with CNC machines and handheld routers. These bits are ideal for cutting shallow dados, rabbets, and visible slots due to the clean finish provided on the edge of the hole or groove. When used for pattern routing or cutting through material, these bits allow clear vision of the cutting line to be maintained.
Superior Finish and Performance
Each spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety and each bit has a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
STC Router Bits
Each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. This ultimate micro-grain carbide formulation gives the longest tool life and edge retention ensuring a very clean and accurate cut that leads to the ultimate finish. These STC router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.
Spiral Down Cut Two Flute Bits
Spiral down cut two flute bits are used to push chips down and away from the machine to eliminate splintering and tearout, and provide the finest top surface finish. The down-cut geometry of the bits also works to hold the workpiece in place when used with CNC machines and handheld routers. These bits are ideal for cutting shallow dados, rabbets, and visible slots due to the clean finish provided on the edge of the hole or groove. When used for pattern routing or cutting through material, these bits allow clear vision of the cutting line to be maintained.
Superior Finish and Performance
Each spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety and each bit has a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
Each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. This ultimate micro-grain carbide formulation gives the longest tool life and edge retention ensuring a very clean and accurate cut that leads to the ultimate finish. These STC router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.
Spiral Down Cut Two Flute Bits
Spiral down cut two flute bits are used to push chips down and away from the machine to eliminate splintering and tearout, and provide the finest top surface finish. The down-cut geometry of the bits also works to hold the workpiece in place when used with CNC machines and handheld routers. These bits are ideal for cutting shallow dados, rabbets, and visible slots due to the clean finish provided on the edge of the hole or groove. When used for pattern routing or cutting through material, these bits allow clear vision of the cutting line to be maintained.
Superior Finish and Performance
Each spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety and each bit has a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
Show more +
Specifications
R5837
D=3mm H=12mm L=51mm n.max=24,000 S=1/4"
R5838
D=4mm H=16mm L=50mm n.max=24,000 S=1/4"
R5839
D=5mm H=20mm L=50mm n.max=24,000 S=1/4"
R5840
D=6mm H=20mm L=50mm n.max=24,000 S=1/4"
R5841
D=8mm H=25mm L=76mm n.max=24,000 S=1/2"
R5842
D=10mm H=25mm L=76mm n.max=24,000 S=1/2"
R5843
D=12mm H=38mm L=89mm n.max=24,000 S=1/2"
R5844
D=12mm H=50mm L=102mm n.max=24,000 S=1/2"
Show more +
5.000
3
5
Customer Reviews
Reviews (3)
Write Review....
Richard Marpole
Great bit, nice and sharp producing a very clean cut.
Geoff Hawkesford
Using these cutters on CNC Router gives a very nice clean cut on Oak and Walnut
Trevor Crowder
Fantastic router cutter, very sharp leaving exceptionally clean cuts.
Show more +
Solid Carbide - Spiral Down Cut 2 Flute - D=3mm H=12mm L=51mm S=1/4"
Solid Carbide - Spiral Down Cut 2 Flute - D=4mm H=16mm L=50mm S=1/4"
Solid Carbide - Spiral Down Cut 2 Flute - D=5mm H=20mm L=50mm S=1/4"
Solid Carbide - Spiral Down Cut 2 Flute - D=6mm H=20mm L=50mm S=1/4"
Solid Carbide - Spiral Down Cut 2 Flute - D=8mm H=25mm L=76mm S=1/2"
Solid Carbide - Spiral Down Cut 2 Flute - D=10mm H=25mm L=76mm S=1/2"
Solid Carbide - Spiral Down Cut 2 Flute - D=12mm H=38mm L=89mm S=1/2"
Solid Carbide - Spiral Down Cut 2 Flute - D=12mm H=50mm L=102mm S=1/2"
£19.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process