STC Router Bit - Spiral Down Cut Two Flute
STC Router Bit - Spiral Down Cut Two Flute
£19.99
inc. vat
Home > Router Bits > STC Router Bits > STC Router Bits > Spiral Down Cut Two Flute > STC Router Bit - Spiral Down Cut Two Flute

Key Features

  • Lifetime Warranty
    If any bit fails due to a material or manufacturing defect it will be replaced free of charge
  • Spiral Down Cut Two Bits
    Used to push chips down and away from the machine to eliminate splintering and tearout, and provide the finest top surface finish
  • Micro-Grain Solid Tungsten Carbide
    Longest tool life and edge retention for the ultimate finish
  • Precision Ground
    From a single piece of solid tungsten carbide
  • Efficient Chip Ejection
    Spiral profile ensures the chips are removed quickly and away from the workpiece
  • Optimum Cutting Angle
    Ensures the wood is sheared cleanly
  • Bits Run Cooler During Use
    As solid carbide dissipates heat more uniformly meaning the edges remain as sharp as possible and are retained for longer

Show more +

Product Details

STC Router Bits
Each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. This ultimate micro-grain carbide formulation gives the longest tool life and edge retention ensuring a very clean and accurate cut that leads to the ultimate finish. These STC router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.

Spiral Down Cut Two Flute Bits
Spiral down cut two flute bits are used to push chips down and away from the machine to eliminate splintering and tearout, and provide the finest top surface finish. The down-cut geometry of the bits also works to hold the workpiece in place when used with CNC machines and handheld routers. These bits are ideal for cutting shallow dados, rabbets, and visible slots due to the clean finish provided on the edge of the hole or groove. When used for pattern routing or cutting through material, these bits allow clear vision of the cutting line to be maintained.

Superior Finish and Performance
Each spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety and each bit has a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
STC Router Bits
Each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. This ultimate micro-grain carbide formulation gives the longest tool life and edge retention ensuring a very clean and accurate cut that leads to the ultimate finish. These STC router bits are suitable for use on softwoods, hardwoods, veneers, plastic materials, laminates, and composite materials.

Spiral Down Cut Two Flute Bits
Spiral down cut two flute bits are used to push chips down and away from the machine to eliminate splintering and tearout, and provide the finest top surface finish. The down-cut geometry of the bits also works to hold the workpiece in place when used with CNC machines and handheld routers. These bits are ideal for cutting shallow dados, rabbets, and visible slots due to the clean finish provided on the edge of the hole or groove. When used for pattern routing or cutting through material, these bits allow clear vision of the cutting line to be maintained.

Superior Finish and Performance
Each spiral has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly as well as providing efficient chip ejection. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety and each bit has a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©

Show more +

Specifications

R5837 D=3mm H=12mm L=51mm n.max=24,000 S=1/4"
R5838 D=4mm H=16mm L=50mm n.max=24,000 S=1/4"
R5839 D=5mm H=20mm L=50mm n.max=24,000 S=1/4"
R5840 D=6mm H=20mm L=50mm n.max=24,000 S=1/4"
R5841 D=8mm H=25mm L=76mm n.max=24,000 S=1/2"
R5842 D=10mm H=25mm L=76mm n.max=24,000 S=1/2"
R5843 D=12mm H=38mm L=89mm n.max=24,000 S=1/2"
R5844 D=12mm H=50mm L=102mm n.max=24,000 S=1/2"

Show more +
5.000 3 5

Customer Reviews

Reviews (3)
Write Review....

Richard Marpole

Great bit, nice and sharp producing a very clean cut.

Geoff Hawkesford

Using these cutters on CNC Router gives a very nice clean cut on Oak and Walnut

Trevor Crowder

Fantastic router cutter, very sharp leaving exceptionally clean cuts.

Show more +
Show more +

STC Router Bit - Spiral Down Cut Two Flute

Rutlands®
Part No. M_R5837
£19.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £15.99
  • Saturday Next Day UK - £19.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >