Router Bit Set - Bevel with Bearing
£69.99
inc. vat
Home > Router Bits > TCT Router Bits > TCT Router Bit Sets > Bevel Bit Sets > Router Bit Set - Bevel with Bearing
Key Features
- Lifetime Warranty
If any bit fails due to a material or manufacturing defect it will be replaced free of charge - Bevel with Bearing Bits
Provide a sharp, clean bevelled edge on door and window frames, table and chair legs, window sills, mouldings and much more - Diamond Ground Micro-Grain Tungsten Carbide Tips
Micro-grain structure means the blades offer long lasting hardness and superior edge retention - Perfectly Balanced Machined Steel Bodies
Reduce vibration for maximum control, producing a smoother cut and providing a longer bit life - Brazed By Induction
The tips are attached by induction creating an extremely strong joint between tip and body - Cutting Edge Shear Angle
Gives a smoother, slicing cut to eliminate tear-out and give a superior finish - Anti Kick Back Design
Allows you work safely in accordance with German DIN standards
Bundles
This Item: Router Bit Set - Bevel with Bearing
£69.99
Double Feather Board
£39.99
Grip Blocks - Pack of 12
£39.99
Product Details
TCT Router Bits
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
Bevel with Bearing Bits
Bevel with bearing bits are a popular choice for providing a sharp, clean bevelled edge on door and window frames, table and chair legs, windowsills, mouldings and much more. The bits can also be used to create a small chamfer on the corners of veneers and laminates which will prevent chipping. Each bit has a bearing which acts as a fence against the workpiece to ensure the profile is being followed without the use of a template. The set of 4 contains an 11.25°, a 15°, a 22.5° and a 30° bevel bit.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge.©
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
Bevel with Bearing Bits
Bevel with bearing bits are a popular choice for providing a sharp, clean bevelled edge on door and window frames, table and chair legs, windowsills, mouldings and much more. The bits can also be used to create a small chamfer on the corners of veneers and laminates which will prevent chipping. Each bit has a bearing which acts as a fence against the workpiece to ensure the profile is being followed without the use of a template. The set of 4 contains an 11.25°, a 15°, a 22.5° and a 30° bevel bit.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge.©
TCT Router Bits
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
Bevel with Bearing Bits
Bevel with bearing bits are a popular choice for providing a sharp, clean bevelled edge on door and window frames, table and chair legs, windowsills, mouldings and much more. The bits can also be used to create a small chamfer on the corners of veneers and laminates which will prevent chipping. Each bit has a bearing which acts as a fence against the workpiece to ensure the profile is being followed without the use of a template. The set of 4 contains an 11.25°, a 15°, a 22.5° and a 30° bevel bit.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge.©
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
Bevel with Bearing Bits
Bevel with bearing bits are a popular choice for providing a sharp, clean bevelled edge on door and window frames, table and chair legs, windowsills, mouldings and much more. The bits can also be used to create a small chamfer on the corners of veneers and laminates which will prevent chipping. Each bit has a bearing which acts as a fence against the workpiece to ensure the profile is being followed without the use of a template. The set of 4 contains an 11.25°, a 15°, a 22.5° and a 30° bevel bit.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge.©
Show more +
Specifications
Brand
Rutlands®
R5817
D=18.3mm H=22.2mm A=11.25° L=64mm n.max=24,000 S=1/4"
R5818
D=21.4mm H=22.2mm A=15° L=64mm n.max=24,000 S=1/4"
R5819
D=27.8mm H=22.2mm A=22.5° L=64mm n.max=18,000 S=1/4"
R5820
D=35mm H=22.2mm A=30° L=64mm n.max=18,000 S=1/4"
Show more +
5.000
2
5
Customer Reviews
Reviews (2)
Write Review....
Bill Jarvis
Really happy with this set, I was originally only in the market for a single chamfer cutter but this set looked too useful to dismiss. I have used the 30 degree bit most often and it performs very well on various species of wood and always leaves a silky finish. Would recommend.
Matthew Webb
Handy set of cutters to have to deal with a wide variety of profile. The box is a bonus
Show more +
£69.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process