Router Bit Set - Kitchen Worktop
£49.99
inc. vat
Home > Router Bits > TCT Router Bits > TCT Router Bit Sets > Kitchen Worktop Bit Sets > Router Bit Set - Kitchen Worktop
Key Features
- Lifetime Warranty
If any bit fails due to a material or manufacturing defect it will be replaced free of charge - 3 Piece Kitchen Worktop Set
flawless, chip free trims on laminate kitchen worktop - Diamond Ground Micro-Grain Tungsten Carbide Tips
Micro-grain structure means the blades offer long lasting hardness and superior edge retention - Perfectly Balanced Machined Steel Bodies
Reduce vibration for maximum control, producing a smoother cut and providing a longer bit life - Brazed By Induction
The tips are attached by induction creating an extremely strong joint between tip and body - Cutting Edge Shear Angle
Gives a smoother, slicing cut to eliminate tear-out and give a superior finish - Anti Kick Back Design
Allows you work safely in accordance with German DIN standards
Bundles
This Item: Router Bit Set - Kitchen Worktop
£49.99
Grip Blocks - Pack of 12
£39.99
Product Details
TCT Router Bits
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
Kitchen Worktop Bits
This 3 piece kitchen worktop TCT router bit set provides the perfect solution for kitchen fitters or home users to achieve flawless, chip free trims on laminate kitchen worktops. Give your kitchen a professional look with these bits designed specifically for routing abrasive materials such as MDF, chipboard and plywood. These straight bits have two parallel cutting edges that combine to produce an excellent finish as well as featuring a bottom cutting edge which allows for fast and efficient plunge cutting.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
Kitchen Worktop Bits
This 3 piece kitchen worktop TCT router bit set provides the perfect solution for kitchen fitters or home users to achieve flawless, chip free trims on laminate kitchen worktops. Give your kitchen a professional look with these bits designed specifically for routing abrasive materials such as MDF, chipboard and plywood. These straight bits have two parallel cutting edges that combine to produce an excellent finish as well as featuring a bottom cutting edge which allows for fast and efficient plunge cutting.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
TCT Router Bits
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
Kitchen Worktop Bits
This 3 piece kitchen worktop TCT router bit set provides the perfect solution for kitchen fitters or home users to achieve flawless, chip free trims on laminate kitchen worktops. Give your kitchen a professional look with these bits designed specifically for routing abrasive materials such as MDF, chipboard and plywood. These straight bits have two parallel cutting edges that combine to produce an excellent finish as well as featuring a bottom cutting edge which allows for fast and efficient plunge cutting.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
Kitchen Worktop Bits
This 3 piece kitchen worktop TCT router bit set provides the perfect solution for kitchen fitters or home users to achieve flawless, chip free trims on laminate kitchen worktops. Give your kitchen a professional look with these bits designed specifically for routing abrasive materials such as MDF, chipboard and plywood. These straight bits have two parallel cutting edges that combine to produce an excellent finish as well as featuring a bottom cutting edge which allows for fast and efficient plunge cutting.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
Show more +
Specifications
Brand
Rutlands®
D
12.7mm
H
50.8mm
n.max
24,000
s
1/2"
Show more +
5.000
3
5
Customer Reviews
Reviews (3)
Write Review....
Tim Blackman
Richard Oliver
Very good quality bits, this set was the first I purchased from Rutlands and they are so good I will 100% be buying more
Chris Chatfield
excellent value and quality, produce a precise cut on all the worktops I use from butt and scribe to sink cutouts etc.
Show more +
£49.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process
The cheaper alternatives last 1 cut in a laminate worktop and ones that cost twice the price last no longer than the Rutlands cutters.