TCT Router Bit Set - 5 Piece - Raised Panel Door and Drawer Set  - Bevel - 1/2" Shank
TCT Router Bit Set - 5 Piece - Raised Panel Door and Drawer Set - Bevel - 1/2" Shank
£129.99
inc. vat
Home > Router Bits > TCT Router Bits > TCT Router Bit Sets > Raised Panel Door and Drawer Bit Sets > TCT Router Bit Set - 5 Piece - Raised Panel Door and Drawer Set - Bevel - 1/2" Shank

Key Features

  • Lifetime Warranty
    If any bit fails due to a material or manufacturing defect it will be replaced free of charge
  • Raised Panel Door and Drawer Set - Bevel
    Create custom cabinet and kitchen doors and drawers that feature bevel profiles which give a modern style
  • Drawer Making Bits
    Drawer lock and reversible glue joint bit are used to construct drawer assemblies
  • Diamond Ground Micro-Grain Tungsten Carbide Tips
    Micro-grain structure means the blades offer long lasting hardness and superior edge retention
  • Perfectly Balanced Machined Steel Bodies
    Reduce vibration for maximum control, producing a smoother cut and providing a longer bit life
  • Brazed By Induction
    The tips are attached by induction creating an extremely strong joint between tip and body
  • Cutting Edge Shear Angle
    Gives a smoother, slicing cut to eliminate tear-out and give a superior finish
  • Anti Kick Back Design
    Allows you work safely in accordance with German DIN standards

Show more +

Bundles

Total: £149.97
This Item: TCT Router Bit Set - 5 Piece - Raised Panel Door and Drawer Set - Bevel - 1/2" Shank
£129.99

Product Details

TCT Router Bits
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.

Raised Panel Door and Drawer Set - Bevel
This 5 piece raised panel door and drawer making set is the perfect solution to creating custom cabinet and kitchen doors and drawers that feature bevel profiles which give a modern style. The rail and stile bits will form strong, perfect fitting frame joints with deep grooves to accept the edges of panels, which are produced using the raised panel bit. The raised panel bit has a bearing which allows the bit to be used on straight or shaped panels and will create a 6.35mm tongue when using 19.05mm stock. The rail and stile router bits cut a slot width of 6.35mm for the tongues created by the panel bit to fit snugly inside. The drawer lock and reversible glue joint bits are used to construct drawer assemblies meaning this set of 5 bits is all you need to create custom cabinet and kitchen doors and drawers.

Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
TCT Router Bits
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.

Raised Panel Door and Drawer Set - Bevel
This 5 piece raised panel door and drawer making set is the perfect solution to creating custom cabinet and kitchen doors and drawers that feature bevel profiles which give a modern style. The rail and stile bits will form strong, perfect fitting frame joints with deep grooves to accept the edges of panels, which are produced using the raised panel bit. The raised panel bit has a bearing which allows the bit to be used on straight or shaped panels and will create a 6.35mm tongue when using 19.05mm stock. The rail and stile router bits cut a slot width of 6.35mm for the tongues created by the panel bit to fit snugly inside. The drawer lock and reversible glue joint bits are used to construct drawer assemblies meaning this set of 5 bits is all you need to create custom cabinet and kitchen doors and drawers.

Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©

Show more +

Specifications

Brand Rutlands®
R5657 D=41.3mm H=17.5mm A=25° L=76mm n.max=18,000 S=1/2"
R5658 D=41.3mm H=23.8mm A=25° L=75.2mm n.max=18,000 S=1/2"
R5639 D=76.2mm H=15.9mm A=18° P=6.35mm L=71mm n.max=12,000 S=1/2"
R5683 D=25.4mm H=11.9mm A=3.18mm L=53.2mm n.max=24,000 S=1/4"
R5755 D=38mm H=32mm A=30° L=73mm n.max=18,000 S=1/2"

Show more +
4.867 15 5

Customer Reviews

Reviews (15)
Write Review....

Trevor Harle

I find that with some router cutter sets you only seem to use 50% - 60% of the cutters. Not so with this one. All of my cutters have had a lot of use with the glue joint cutter being a particular favourite. The simple ogee panel door pattern these produce looks really good and I've used them now on maple, oak and wenge. I really like Tornado cutters they're not too expensive and they give a really great finish.

Steve Little

This set is worth buying for the panel door cutters alone. I got this set to make oak doors for a kitchen I was refitting the other cutters helped with making the drawers and fitting the oak worktops. Excellent set and the sheer quality of the cutters makes it a bargain.

C Sands

Ordered this set late afternoon and received them the next morning which is very good service. They appear to cut well but I have not used them much yet. I feel that they are let down by the lack of setup instructions in the box with them.hence only 4 out of five.

Terry Redfern

Great set, fantastic price, all the cutters I need to get going, finding these Rutlands cutters very good quality, whish I had ordered them in the sale

Jon Buckingham

Have just used to test cut rails/stiles/panel for a door project. All worked ok, though there was slightly more tolerance than I'd have liked between rail and stile. But will work well enough (especially for the price).

Barry Wise

Good value set. You have to be careful with setting up the first time. I suggest keeping a template piece to aid subsequent setting up on the router table. The "drawer lock cutter" is a bit of a mystery, but I've posted a vid on You Tube to explain it.

Simon Green

Great set of cutters. I do agree with others who say the draw lock cutter is a bit of a pain. Please could you post a link to the Youtube video?
Delivered on time, in good strong packaging. No fuss would defiantly buy from Rutlands again.

Mark Davis


Good quality router bits. However, there are no instructions with them and this aspect really lets this set down.

Y Ayub

These are a fantastic set for making kitchen cabinets this includes doors, draws and even the carcass fixed with reverse mitre lock bit. Have also made all oak internal doors (6 panel arched top on each panel) through out my house and looks awesome. Would highly recommend as some of these bits can be used for making various jigs as are highly accurate.

Malcolm Taylor

Great quality.cant believe how heavy this set is!i think im going to have to trade my dewalt in for a variable speed version.have not tried these cutters yet but i cant wait.next day delivery as usual great service.

Mark Hayden

I haven't used the cutters yet but other reviews are good. They seem robust but time will tell. Placed the order on monday eve and the delivery arrived in france on thursday.. exceptional. That people can complain that they lack instructions at this price is beyond me.

David Allen

Good quality set. I have only used the raised panel cutter so far for an external door, but it gave good results.

Roberto Fernandez

Really happy with this purchase. I bought them to do my kitchen project and they look so robust and good quality. I haven´t tested them yet but i cant wait to get into the workshop. Delivery was excellent. Really well wrapped and protected the packaging and really fast delivery. I ordered them on Wednesday afternoon and there was a courier driver next morning on my doorstep. Definitely I will get back to this site to catch some bargains. Highly recommended.

David Letford

A bargain! It was cheaper to byuy this set than 2 of the cutters I needed individually. Nice cutters that give a clean cut, just need to find more jobs for them now.

Rafael Rose-james

Lovely set, great sharpness retention. Delivered promptly. Thanks

Show more +

TCT Router Bit Set - 5 Piece - Raised Panel Door and Drawer Set - Bevel - 1/2" Shank

Rutlands®
Part No. R5922
£129.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £15.99
  • Saturday Next Day UK - £19.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >