Router Bit Set - Tongue & Groove Edge Banding
£79.99
inc. vat
Home > Router Bits > TCT Router Bits > TCT Router Bit Sets > Tongue & Groove Edge Banding Bit Sets > Router Bit Set - Tongue & Groove Edge Banding
Key Features
- Lifetime Warranty
If any bit fails due to a material or manufacturing defect it will be replaced free of charge - Tongue & Groove Edge Banding Bits
Hide unsightly edges on plywood and MDF board using the precise tongue and groove profile - Diamond Ground Micro-Grain Tungsten Carbide Tips
Micro-grain structure means the blades offer long lasting hardness and superior edge retention - Perfectly Balanced Machined Steel Bodies
Reduce vibration for maximum control, producing a smoother cut and providing a longer bit life - Brazed By Induction
The tips are attached by induction creating an extremely strong joint between tip and body - Cutting Edge Shear Angle
Gives a smoother, slicing cut to eliminate tear-out and give a superior finish - Anti Kick Back Design
Allows you work safely in accordance with German DIN standards
Bundles
This Item: Router Bit Set - Tongue & Groove Edge Banding
£79.99
Grip Blocks - Pack of 12
£39.99
Product Details
TCT Router Bits
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
Tongue & Groove Edge Banding Bits
This 2 piece edge banding TCT router bit set allows you to hide unsightly edges on your plywood and MDF projects by creating a precise tongue and groove profile using the matched male and female router bits. Featuring a 120° angle with an interlocking tongue and groove to create a larger surface area for glue application giving you long lasting edges on your panels and shelves. Simply centre the male router bit on the stock and make the cut, then match up the female router bit with the centre point of your first cut. Finish your edge banding with your choice of solid wood, gluing together the two pieces. Minimum stock thickness for these bits is 12.7mm and the maximum thickness is 25.4mm.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
Tongue & Groove Edge Banding Bits
This 2 piece edge banding TCT router bit set allows you to hide unsightly edges on your plywood and MDF projects by creating a precise tongue and groove profile using the matched male and female router bits. Featuring a 120° angle with an interlocking tongue and groove to create a larger surface area for glue application giving you long lasting edges on your panels and shelves. Simply centre the male router bit on the stock and make the cut, then match up the female router bit with the centre point of your first cut. Finish your edge banding with your choice of solid wood, gluing together the two pieces. Minimum stock thickness for these bits is 12.7mm and the maximum thickness is 25.4mm.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
TCT Router Bits
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
Tongue & Groove Edge Banding Bits
This 2 piece edge banding TCT router bit set allows you to hide unsightly edges on your plywood and MDF projects by creating a precise tongue and groove profile using the matched male and female router bits. Featuring a 120° angle with an interlocking tongue and groove to create a larger surface area for glue application giving you long lasting edges on your panels and shelves. Simply centre the male router bit on the stock and make the cut, then match up the female router bit with the centre point of your first cut. Finish your edge banding with your choice of solid wood, gluing together the two pieces. Minimum stock thickness for these bits is 12.7mm and the maximum thickness is 25.4mm.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.
Tongue & Groove Edge Banding Bits
This 2 piece edge banding TCT router bit set allows you to hide unsightly edges on your plywood and MDF projects by creating a precise tongue and groove profile using the matched male and female router bits. Featuring a 120° angle with an interlocking tongue and groove to create a larger surface area for glue application giving you long lasting edges on your panels and shelves. Simply centre the male router bit on the stock and make the cut, then match up the female router bit with the centre point of your first cut. Finish your edge banding with your choice of solid wood, gluing together the two pieces. Minimum stock thickness for these bits is 12.7mm and the maximum thickness is 25.4mm.
Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
Show more +
Specifications
Brand
Rutlands®
Tongue Bit
D=36.5mm H=25.4mm A=120° L=58mm n.max=18,000 S=1/4"
Groove Bit
D=36.5mm H=25.4mm A=120° L=68mm n.max=18,000 S=1/4"
Show more +
5.000
1
5
Customer Reviews
Reviews (1)
Write Review....
V Coggin
Ideal for making your project premium without the expense of solid wood. The bits are easy to set up and produce perfectly mating sections.
Show more +
£79.99
inc. vat
Quantity Discounts
Delivery
Order before 4pm Monday to Friday for Next Working Day Delivery
- Royal Mail Tracked 24 (Below 2kg) - £4.99
- Next Working Day UK - £6.99
- 10am Next Working Day UK - £15.99
- Saturday Next Day UK - £19.99
- International - Choose Destination
- Show Delivery Rates for
- Choose Destination
Click & Collect
Order online and collect within 1 hour.
Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday
Find out more >Returns
We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.
- No quibble 30 day returns policy
- Quick and simple returns process