Router Bit Set - Window Sash
Router Bit Set - Window Sash
£89.99
inc. vat

Key Features

  • Lifetime Warranty
    If any bit fails due to a material or manufacturing defect it will be replaced free of charge
  • Window Sash Bit Set
    Used for the production of custom window sashes and french doors
  • Perfectly Matched, Elegantly Styled
    Rail and stile frames with coped joints, narrow sash bars and muntins
  • Diamond Ground Micro-Grain Tungsten Carbide Tips
    Micro-grain structure means the blades offer long lasting hardness and superior edge retention
  • Perfectly Balanced Machined Steel Bodies
    Reduce vibration for maximum control, producing a smoother cut and providing a longer bit life
  • Brazed By Induction
    The tips are attached by induction creating an extremely strong joint between tip and body
  • Cutting Edge Shear Angle
    Gives a smoother, slicing cut to eliminate tear-out and give a superior finish
  • Anti Kick Back Design
    Allows you work safely in accordance with German DIN standards

Show more +

Bundles

Total: £139.97
This Item: Router Bit Set - Window Sash
£89.99
Total: £93.98
This Item: Router Bit Set - Window Sash
£89.99

Product Details

TCT Router Bits
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.

Window Sash Bit Set
This 2 piece window sash set is used for the production of custom window sashes and french doors. These bits will produce perfectly matched, traditionally styled rail and stile frames with coped joints and a rebated side for accepting glass. These bits will also produce the narrow sash bars and muntins for holding multiple panes of glass. These bits are designed for use with 35mm stock, however variations as narrow as 28mm can be used. Material thicker than 35mm will exceed the cutting range of the bit. For router table use only.

Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©
TCT Router Bits
Each router bit features diamond ground, micro-grain tungsten carbide tipped blades. This tighter micro-grain structure means the blades offer long lasting hardness and superior edge retention. The body of each bit has been turned and then milled with uncompromising precision from a single piece of 4140 high tensile steel to give perfect balance for reduced vibration and therefore smoother cuts. 4140 steel has been chosen because of its toughness, high fatigue strength, and abrasion and impact resistance. The tungsten carbide tips are then brazed onto the bodies using induction to create an extremely strong joint that safely holds under the high stresses that occur when routing. The router bits are suitable for use on softwoods, hardwoods, veneers, laminates and composite materials.

Window Sash Bit Set
This 2 piece window sash set is used for the production of custom window sashes and french doors. These bits will produce perfectly matched, traditionally styled rail and stile frames with coped joints and a rebated side for accepting glass. These bits will also produce the narrow sash bars and muntins for holding multiple panes of glass. These bits are designed for use with 35mm stock, however variations as narrow as 28mm can be used. Material thicker than 35mm will exceed the cutting range of the bit. For router table use only.

Superior Finish and Performance
The shearing angle of the cutting edges ensure they remain in constant contact with the workpiece to allow a smoother, slicing cut which eliminates tear-out and gives a mirror finish. The bits feature right hook angles which further enhances the cut due to the fast removal of chips. These bits feature an anti-kickback design which limits the feed rate of the material being cut to decrease the likelihood of a kickback, meaning each bit conforms to strict German DIN standards to ensure maximum operator safety. Each router bit features a lifetime warranty, if any bit fails due to a materials or manufacturing defect it will be replaced free of charge. ©

Show more +

Specifications

Brand Rutlands®
R5762 D=38mm H=19mm R=6mm L=60.3mm n.max=18,000 S=1/2"
R5763 D=35mm H=35mm R=6mm L=90.5mm n.max=18,000 S=1/2"

Show more +
5.000 4 5

Customer Reviews

Reviews (4)
Write Review....

Rick

A quality pair of bits that produce a classic window profile. A little tricky to set up at first so many test pieces of scrap were used prior to starting the job. Quality of cut is excellent and the price is good value. Recommended.

Marcus Peters

Built a new oak window casement and used these to add the finishing details. Really pleased with the clean, accurate finish produced.

arnold jackson

as close as I could get to the original profile of some old antique doors for a restoration job - good quality bits have recommended to my peers

David Ellershaw

Recently made an Accoya window casement using these excellent router bits. Highly recommended.

Show more +

Router Bit Set - Window Sash

Rutlands®
Part No. R5761
£89.99 inc. vat

Quantity Discounts

Delivery

Order before 4pm Monday to Friday for Next Working Day Delivery

  • Royal Mail Tracked 24 (Below 2kg) - £4.99
  • Next Working Day UK - £6.99
  • 10am Next Working Day UK - £15.99
  • Saturday Next Day UK - £19.99
  • International - Choose Destination

Click & Collect

Order online and collect within 1 hour.

Collect from our Bakewell distribution centre between 10.00am and 5.00pm Monday to Friday

Find out more >

Returns

We're commited to selling high quality products, however we understand there can be times when items need to be exchanged or returned.

  • No quibble 30 day returns policy
  • Quick and simple returns process
Find out more >